I am trying to install RHEL 6 on a machine without a monitor. After reading through their installation guide I have decided to try a vnc installation using my laptop. The guide says: To activate the VNC connect mode, pass the vncconnect boot parameter:
boot: linux vncconnect=HOST
The problem is that I have never had to do this before, I have no idea what "pass a boot parameter" means.
How do i create two partition on my hdd and install rhel on one and windows xp on the other
View 2 Replies View RelatedHow can I install Xen server on RHEL 5.3 machine?
The server is: AMD 64bit (supports virtualization)
I am not very new to LINUX. I was using UBUNTU for the last 1 year and I have switched to Redhat now because I am thinking of taking a RHCE certification now. Actually the problem is that I am unable to install RHEL 5.2 i386 on my i686 machine, I have bought it recently 1 week ago. I tried to use the boot parameter "linux noprobe" then it said drivers not found after 2 steps when it loads drivers.
When I tried to make a GUI install it hanged after "loading /sbin/loader" and said "kernel panic - not syncing". And when I tried to make a text install it said hanged agin after "loading /sbin/loader" and said something like "Oops: 0000 [#1] SMP". If drivers are needed then when can I get those and how can I install those drivers? here is my hardware information as "lspci" says:
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
One monitor is working fine but the display is not coming on other monitor. I guess no problem in monitor because I swapped the cable to check the individual monitor. When I try to install the new driver its giving GCC-VERSION-CHECK while installing. And I do not think I have to install the new driver because it has already one. What should I do to configure the dual monitor. Do I have to edit any configuration file.
My system configuration details are below.
Redhat version : Redhat Enterprise Linux WS release 3 (Taroon update 4)
Driver in SRBC 26: NVIDIA-LINUX-x86_64-1.0-7664-pkg2.run
Nvidia card model : Quadro fx p171
Bios version of Nvidia : 4.35.20.23.07
p/n : 900-50171-0400-0000K
600-50171-0002-201J
view all the software installed on my RHEL 5 machine. Can we find any utility like Add/Remove Programs in Windows?
View 4 Replies View RelatedHow to monitor hardware temperature (CPU , Motherboard , HDD etc) in CentOS/RHEL ?
View 3 Replies View RelatedI have configured NIS, DNS, NFS and DHCP servers at my home network. I can easily authenticate another Linux machine to these servers and make that machine as a client and also users can locin using the automounter. My Question is, is it possible that by using the same setup I can authenticate a windows Xp machine and make it as a client, and also users can login using the passwords that I have provided on my NIS server?
View 1 Replies View Relatedis possible to edited the default RHEL CD to have it automatically install RHEL based off of a kickstart file that I will store locally on the CD. My plan would be to put a cd in a server and have the OS automatically being installed.
View 3 Replies View RelatedI am using linux from last three month.
View 1 Replies View RelatedI have RHEL 3 and Win XP Installed in my P.C?I want to uninstall RHEL 3 and install RHEL 9 without affecting XP.how can i do this and also where can i download free RHEL 9 version or any other latest linux distribution for free?
View 1 Replies View RelatedIs VirtualBox on RHEL a good Idea? I am running rhel 5.5 on and amd 64 machine. The internet reviews rated VirtualBox pretty high. What is the real scoop?
View 2 Replies View RelatedHave a customer who is due for a new system. AS they just renewed their RHEL entitlement, they plan on ordering a Dell server without a OS preload. Two questions:
- Will RH let them download RHEL6 just by maintaining the entitlement when their current version is RHEL 3?
- The server will have two RAID arrays - one intended for /home, one for "everything else". As I've never done a clean load with two arrays, how do I select what file systems go on which array?
I am preparing for the RHCE and would like to get some feedback on network installation.
1. How can we practice network installation on the Vista? I have installed CentOS installed using VMware desktop on Vista windows?
2. In exam do we get network server installed or we have to install it?
I have RHEL 4, RHEL 3, i need install dmidecode RPM packet and procinfo packet... exist this packets for this linux versions?
View 11 Replies View RelatedI have RHEL 5.3 running on Cray CX1. I am trying to connect to HP LP3065 30" monitor and not getting any video display (no response at all). Monitor is working fine on Windows system. Monitor has only DVI-D ports and my Cray system also has DVI socket to connect with. I checked for drivers at HP site and I couldn't find one anywhere else. I have NVIDIA quadro FX4800 video card and NVIDIA driver installed.
View 8 Replies View RelatedI have tripwire enterprise (not open source) agent running on one of my rhel4.8 web servers (I have actually tried with two servers with same results). The agent is a simple install rpm bin file and appears to be running as it should and the server for tripwire enterprise is set up accordingly. A windows tripwire enterprise agent is also on a windows machine that works perfectly well. But I cannot seem to get the tripwire server to talk to the agent on the red hat machine.
I can connect to port 9898 on the server, but the agent who also talks over the same port doesn't appear to be responding to the server on this port. There are no iptables set up to block the requests, there is no firewall set up (disabled) . Network team can see the packet requests being sent over the routers fine... So can't see why there would be a problem. So i reverted to the use of net cat.
Nc -l 9898 (on the agent machine)
Telnet <agent> 9898
But I get connection refused. Is there anything I could be missing here? Redhat is not my Linux of preference and it may be something obvious!
i am using rhel5 in my pc. i dont have internet connection.how can i install vlc in my pc. share your answer please?
View 9 Replies View Relatedcan someone advise the free avg for linux how to install and configure it. where and what circumstances it is usefull to install it.if the machine goes to internet, or if we use email,proxy server. how about oracle database.mostly people say no need of antivirus in linux world. but threats are always their like rootkits etcanother qustion is clamav is better or avg is better, there are 2 flavors i found freely available for linux world
View 8 Replies View RelatedI have installed RHEL 5 in on a Virtual PC. I am stuck around while installing the yum server. Initially, I tried installing it by mounting the DVD but it didn't work for me after which I did a lot of google search I tried all the various procedures of the installation of yum server/RPM packages. But however I am finding it impossible to go ahead and I am geting an ***error 404: not found*** way of installation. Also since I am not well acquainted with linux, can I request for a detailed explanation of each & every steps involved.
View 5 Replies View RelatedHow to resolve a standalone RHEL machine under Windows Domain Controller?
View 4 Replies View RelatedI just got a question from a customer(actually from a customer to my manager then to me) and he is asking the following question: What are the components that were installed with RHEL? It may sound like a silly question but to me it sounds vague. The main thing I am thinking about now is during install you can select three components: webserver software development and virtualisation.
View 1 Replies View RelatedI have downloaded RHEL5.5 using my laptop which has windows xp.
All 5 cds of RHEL 5.5 are in winrar format.
How do i burn them to CDs.
I am facing some iLO problems in HP servers so can't take its remote session properly for long time, always Setup starts smoothly but after some time it gets hung in between . Plz let me know if we can do remote install.
View 2 Replies View Relatediam using a RHEL 5.3 and facing problem while installing the dovecot package , im trying to install using the yum but it asking for the dependecy of mysqllyb is not install , pls solve this problem
View 3 Replies View Relatedhow i install gtalk in rhel 5 ? if i dont install gtalk, then any other chat messengers who sopporet rhel5
View 6 Replies View RelatedI want to install python in RHEL 5.0.
View 2 Replies View RelatedHow to install RHEL 5 in VMWare?
View 2 Replies View Relatedi got another question, can i use YUM to install e.g. xinetd on a RHEL 4? or does RHEL4 have another command like YUM?
Code:
$ yum install xinetd
-bash: yum: command not found
can not ping from host (RHEL 6) to RHEL 5 in (virtual)? I have stopped iptables on both machines. But still not able to ping from host machine to virtual.
View 1 Replies View Related