Hardware :: CentOS 5.2, SIS661FX Screen Resolution?
Apr 9, 2009
OK, I have Googled to the end of the Earth and am starting to got nuts! I cannot seem to get my onboard graphics to display a resolution greater than 800x600. As mentioned in the title, I am using CentOS 5.2 and the graphics chip is a SIS 661FX. I have checked that the latest driver is installed, changed the /etc/X11/xorg.conf file to include:
[Code]..
Now, if I restart the system, on occasion I have seen the correct resolution (1204x768), but if I check in "system, administration, display", I only see 2 options (800x600 and 600x480). The next time I restart it goes back to 800x600.
I should add that I have tried several options for modeline (present and absent) and modes in the xorg.conf. The automatically-generated xorg.conf file (after installation) has detected the "sis" driver.
View 4 Replies
ADVERTISEMENT
Oct 19, 2010
I have a centos 5.5 server, without a monitor connected to it.Sometime i need to connect to it with VNC, but maximum resolution is 800x600.How can i increase it at least 1024x748 ??I tried in system-config-display changing the monitor to a generic CRT 1024x768, and rebooted.But only allowed resolutions are 800x600 and 640x480.
View 6 Replies
View Related
Feb 22, 2010
i m using centos 5.but i am unable to set screen resolution.i shows only on half part of monitor/LCD.how can i fix this problem?its urgent.
View 1 Replies
View Related
Mar 25, 2011
my monitor (HP LP2475w) has resolution of 1920x1200 but centos shows as max 1280x720.How can I fix this?
View 8 Replies
View Related
Feb 1, 2010
i have been searching for the past few days on how to do this i have found many articles all telling me slightly different ways of doing so but none have worked. the monitor i am using displays at 1680x1050@60Hz however most access will be from a laptop running at 1366x768 through VNC i have the VNC working thats not a problem my current problem is that when i turn it on the screen defaults to 1600x1200@60Hz when i go to System>Preferences>Screen Resolution the options i get are 1600x1200, 1280x1200,1024x768, 800x600, 640x480 however when i change to something other than 1600x1200 the refresh rate changes to 85Hz and cannot be displayed by my monitor so i have to wait for it to default back, not that i want to change it to any of those in the long term /etc/X11/xorg.conf looks like this (i have only edited the Modes line)
[Code]...
View 8 Replies
View Related
Apr 2, 2009
How to change the welcome screen resolution? (Where you input the username and password) I use NVIDIA driver which download from its official web site. After reboot, the welcome screen out of bottom.Change session, language and restart computer menu not in the screen. Is there a way to set the welcome screen resolution? or how can I fix it?
View 2 Replies
View Related
May 17, 2010
Loaded Cent O/S on VMWare Workstation to begin learning for enterprise role.. The largest screen resolution is 800x600. Is this the max or how can I change it to a larger res.?
View 4 Replies
View Related
Jun 13, 2009
Just installed 5.3 into a VMWare image.
In System > Preferences > Screen Resolution I only get 640x480 option.
How do I get 1024 x 768?
View 2 Replies
View Related
Nov 9, 2009
I use a VMWare ESX Server and installed CentOS.
Within the CentOS I can only use the Screen Resolution 800x600.
As I have a VMware installed I use the VMware grafic adapter shown in the hardware selection.
Even if I configure the VM graphic adapter within the ESX to use 1600x1200.
Is there any change to configure a higher resolution?
View 1 Replies
View Related
Jun 7, 2011
I am running Windows 7 inside KVM on Cent OS 5.6. how do you change the screen size of the Windows 7 KVM. It is about a third of the size of the current screen resolution.
View 3 Replies
View Related
Jun 2, 2010
I have CeontOS machines connected to LCD via KVM which causes failure to properly detect screen resolution and I'm stuck with 800x600 until I reset X server with the LCD connected directly to the PC. How can I enforce higher screen resolutions?
EDIT: I followed the advise and left only one resolution in my xorg.conf but it didn't help.
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 16
[Code]....
View 2 Replies
View Related
Oct 31, 2009
New install of 5.4 and I have a dell S1909W display that runs 1440x900. I don't run a windowed environment and only use CLI. I am only getting 25 lines per screen with huge text and I need to set the resolution so I can actually work :) I tried adding vga=866 to my /boot/grub/menu.lst file at the end of the kernel line but nothing changes after reboot.
View 2 Replies
View Related
Nov 15, 2009
I used to use Linux a long time ago and remember there was a way in the startup script to change the video resolution from 80x25 to high resolution line 50 lines mode. I can't seem to find were to do that any more. I have been reading posts and etc and everything is about changing resolution in X-Windows. how to change the default screen outside of X-Windows>
View 3 Replies
View Related
Feb 20, 2011
My monitor is an old, low-res (800x600 resolution) flatscreen, and the loader keeps trying to set it for 1024x768.the initial setup and package selection screens ran fine. it was only after rebooting to the "Welcome" screen that the problems started. I found the "resolution= (800x600 for me) under "additional boot options", but I don't know how to use it.
View 3 Replies
View Related
Mar 31, 2011
I've installed CentOS 5.5 on my Acer Aspire One D150. It uses the Intel integrated graphics chip GM945 which isn't supported "out of the box" by CentOS. My screen resolution has defaulted to 800x600, but it should be 1024x600. tried xrandr, and editing the xorg.conf file, and now have gone down the rabbit hole of trying to install xf86-video-intel and its associated dependencies (nested like Russian matryoshka dolls). I'm at the point of trying to install xorg-server, but am getting hung up by its dependencies on xproto and fontsproto, despite having installed them.
View 5 Replies
View Related
Aug 27, 2011
I recently upgraded my graphics card from a Geforce 7600GS to a Gefore 560Ti. And while most things are normal, during boot up my screen isn't "full screen" until X is started, after which everything else is fine. Essentially, all display, the grub menu, the splash screen, console text, etc, is within a box on the screen, with 2" on the left and right, and 1" top and bottom of empty blackness.
From what I understand, this is because the framebuffer is using the wrong resolution, but the maximum resolution that hwinfo --framebuffer returns is 1280x1024 (which I am already using "0x031a".) (My monitors is natively 1920x1080) Is it possible to do something about this? If not increase resolution than at least stretch the screen to full screen?
sudo /usr/sbin/hwinfo --framebuffer
02: None 00.0: 11001 VESA Framebuffer
[Created at bios.459]
Unique ID: rdCR.GGyCBArXznD
Hardware Class: framebuffer
Model: "NVIDIA GF104B Board - 10400050"
[Code]...
View 2 Replies
View Related
Jan 11, 2011
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies
View Related
Aug 4, 2010
Unfortunately my experience in the Unix* based world up to this point has only been using web servers and administrating them, no GUI experience of any kind so I am completely unfamiliar with the setup and entire usage of Xorg or any other Window manager at this point. The issue I am having is with the screen resolutions I am being allowed to chose for my Dell Studio 1535 running Fedora Core 13 and the KDE 4 desktop GUI, thus my issue since I am not really familiar with how to run a Unix* based GUI in the first place.
The basic information, if there is more needed just advise what and what command gathers that info (or what conf/log I should look into in order to find it). Laptop is a Dell Studio 1535 Video is the Mobile Intel GMA X3100 ATI Radeon HD 3200 Graphics. LCD interface is the LVDS.
So far it seems to give me modes for 1024x768 and on down, nothing above this. I believe I am supposed to use the radeon driver being that is the type of card it is but every time I change the xorg.conf file to use this instead of vesa the system wont get past the loading screen anymore upon reboot and nor can I seem to find a way to bring up a command line so I can hit up the Xorg.0.log to see what is wrong or change the xorg.conf file back to the original driver it had listed.
I am going to assume this is a missing driver or something else it hangs on but without being able to get access back to the system and having to rebuild it again (re-install via live CD) I am basically out of luck at this time. Sorry for the rather poor post but I do hope to receive some basic directions on where to go from here with this issue
View 12 Replies
View Related
May 1, 2010
Before I upgrade to 10.4 It would be nice to find the best solution to this problem. I use a KVM switch that dont pass the EDID info from the screen to the OS. To solve this, that is, to get the correct screen resolution, i need to pass monitor and screen info to the OS at every startup. One way is to ad a script to /etc/gdm/init/default, or in KDE /etc/kde4/kdm/Xsetup.
View 2 Replies
View Related
Aug 25, 2010
i just installed 10.04.1 and have done a quick apt-get update/apt-get upgrade.the problem is i'm running a 1920 x 1080 display using a geforce gtx460, yet the screen is cropped in at 1280 x 1024. i have the option to go lower only.i first tried to install the nvidia binary in the old-fashioned way of (system > administration > hardware drivers) but this reported that there are no proprietary drivers in use and there was no option to 'switch one on'.i guess my hardware is too new so i want to install the drivers available at nvidia's website (256.44). this adds support for my gpu.
i tried to install these by exiting x but this just resulted in some sort of system hang. the function keys on my keyboard seem to be 'non-functional' too, making a ctrl+alt+f1 not do what it should. i think this may be a problem with the mac keyboard i'm using.is this just a waiting game? can i get into a virtual console somehow else (perhaps during bootup)? is there a way i can exit x without the system hang? is there another way of installing some workable drivers? should i be altering my xorg.conf?
View 4 Replies
View Related
Oct 18, 2010
I have a custom PC with a (nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)) graphics card and a 17" Compaq MV720 CRT monitor. My graphics card/monitor combination is capable of resolutions up to 1280 X 1024.
I just installed Ubuntu 10.10 64Bit, and the highest resolution available at Sysytem>Preferences>Monitors>Resolution: is 1024 X 768. I want to get the resolution up to 1152 X 864, which the card/monitor is capable of. I looked around the forum for a solution, but couldn't find a thread that explains exactly what I want to do. In the most previous version of Ubuntu that I used (9.10), I could generate an xorg.conf with Xorg, grab the (Monitor, Device, and Screen) sections, and use that with a few changes to create an xorg.conf to get the resolutions that I wanted. In 10.10, that no longer works. In fact, it won't even work without the changes. After placing the xorg.conf in /etc/X11, the PC will only boot up to a text CLI prompt to login. No GUI desktop.
My PC is a totally orthodox desktop, no dual boot, no Virtualbox. What do I have to do to get the resolutions above 1024 X 768?
View 4 Replies
View Related
Mar 9, 2011
I've installed Ubuntu 10.10 on my laptop, only to find I only have low resolution problem. I got my system info and it's:
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10)
All the tutorials tell me to try and use xorg, with commands like:
Edit /etc/X11/xorg.conf but I always get a response of
Command 'edit' from package 'mime-support' (main)
Edit: command not found
View 3 Replies
View Related
Feb 15, 2010
I have 2 samsung lcd monitors same model....but the issue is after installing fedora 12 using one of the lcd monitors the resolution was perfect..after replacing with the other monitor i am not able to get the right resolution...even in display setting there is no option for that particular resolution..its seems to be strange..i am also not able to find the xorg.conf file in fedora.
View 2 Replies
View Related
Nov 22, 2010
I have installed ubuntu 10.10 yesterday, but couldnt find any option to set screen resolution , from where to set it ?
View 4 Replies
View Related
Aug 23, 2010
I have a fresh install of debian on an older laptop. The screen resolution is 800 x 600, but I want it to be 1024 x768. I know this screen can handle this resolution because I've used it before. I tampered with xorg.conf according to this link, viewtopic.php?t=26577, but to no avail. Here is my xorg.conf
Section "InputDevice"
Identifier"Generic Keyboard"
Driver"kbd"
Option"XkbRules""xorg"
Option"XkbModel""pc104"
Option"XkbLayout""us"
[Code]...
View 6 Replies
View Related
Jun 23, 2010
One day when i logged in, my screen resolution became lower. The sistem do not recognize anymore my old resolution (native) 1600x900 . And you can realize that maybe there are problems with the video card, because the system is slower than before in this terms. What could have happened?
View 4 Replies
View Related
Aug 17, 2010
Ever since I installed Debian, my monitor keep saying: "Input Signal Out of Range Change Settings to 1600x900 - 60Hz". So I thought it a problem of the screen resolution, so I have been trying to edit my xorg.conf file, but it doesn't seem to work at all. And this is my settings.
Section "Monitor"
Identifier"Configured Monitor"
EndSection
Section "Screen"
Identifier"Default Screen"
Monitor"Configured Monitor"
Device"HP 2009m"
SubSection "Display"
Depth24
Virtual2048 2048
Modes"1600x900_60.00"
EndSubSection
EndSection
View 2 Replies
View Related
Aug 4, 2009
I'm new to Linux I used to use Ubuntu, when I wanted to change resolution in ubuntu just go to xorg.conf but don't have this in Fedora 11. My resolution is 800x600 right now btw.
View 5 Replies
View Related
Sep 18, 2009
After booting, logging into KDE i click the System Setting>Display and the screen resolution becomes 1024x768(60.0Hz).I do this everytime to get this resolution.Is there any way to save the screen resolution? And nothing happens if i press "Print Screen SysRq" from keyboard, so can't get any screenshot.
Why doesn't "Print Screen SysRq" work?
View 3 Replies
View Related
Oct 19, 2009
i recently installed fedora 11 i386 from fedora 8 i386. it was a fresh install. with 8 i had a 1024x768 res and my monitor is a 15.4" Polaroid LCD tv that has a max res of 1280x800. when i goto display and try to change the res it only shows 800x600 and below.
View 11 Replies
View Related
