How to change the welcome screen resolution? (Where you input the username and password) I use NVIDIA driver which download from its official web site. After reboot, the welcome screen out of bottom.Change session, language and restart computer menu not in the screen. Is there a way to set the welcome screen resolution? or how can I fix it?
View 2 RepliesI am running Windows 7 inside KVM on Cent OS 5.6. how do you change the screen size of the Windows 7 KVM. It is about a third of the size of the current screen resolution.
View 3 Replies View RelatedI used to use Linux a long time ago and remember there was a way in the startup script to change the video resolution from 80x25 to high resolution line 50 lines mode. I can't seem to find were to do that any more. I have been reading posts and etc and everything is about changing resolution in X-Windows. how to change the default screen outside of X-Windows>
View 3 Replies View RelatedEver since I installed Debian, my monitor keep saying: "Input Signal Out of Range Change Settings to 1600x900 - 60Hz". So I thought it a problem of the screen resolution, so I have been trying to edit my xorg.conf file, but it doesn't seem to work at all. And this is my settings.
Section "Monitor"
Identifier"Configured Monitor"
EndSection
Section "Screen"
Identifier"Default Screen"
Monitor"Configured Monitor"
Device"HP 2009m"
SubSection "Display"
Depth24
Virtual2048 2048
Modes"1600x900_60.00"
EndSubSection
EndSection
How can I change screen resolution?
View 4 Replies View RelatedI'm very new to Ubuntu and have 9.04 running on a Sony Vaio, don't know what graphics card I have. My screen resolution doesn't have an option higher than 800x600, so everything looks super zoomed in. Other threads tell me to edit xorg.conf, which I did (probably incorrectly). The result was the computer had mega problems when I restarted it, and when it finally got back to the desktop it didn't give me any other options for screen resolution. Also it says I'm in low graphics mode.
View 1 Replies View RelatedI recently upgraded my desktop pc from 10.04 to 10.10 and ran into a tad of trouble. After I attempted to login from the GDM, something caused the system to crash and return to the GDM. So, I got my laptop out, did some googling, and decided to delete ~/.config/monitors.xml to try and reset the resolution. That got me to the Desktop, at which point I was greeted by more display issues.
The point at which the computer normally goes idle seems to crash and return it to the GDM as well. Needless to say, I disabled the idling/password prompt setting to prevent crashes every five minutes. Anyway, the prevailing problem is that I can't change the resolution itself -- as that seems to cause the same issue.
I've recently installed Ubuntu 10.10 on an old Dell computer I have. Everything seems to work fine, but I can't seem to change the screen resolution. In the monitor Preferences it says Monitor:Unknown. It's stuck on 1600x1200 and I'd like it to be closer to 1024x768
I've tried changing the xorg.conf file to no avail. I've been browsing for 3 days now looking for a solution.
[URL] These are my specs if it helps any, ignore the windows installation info because I have it installed alongside ubuntu.
I cannot get my screen resolution to change from 1600x1200. This is a new install of Ubuntu 10.10 and the desired option ( 1024x768 ) is listed under System/Preferences/Monitors. Changing the resolution and clicking Apply results in a screen refresh, but the resolution remains at 1600x1200.
I have gone through just about every tutorial and thread I can find, but nothing works. Here is some relevant information I have gathered code...
I am running 'Slitaz.3' but don't have a clue how i may change the screen resolution.
View 1 Replies View RelatedI have a mecer bravo laptop which has a sis mirage graphics card, I cant change the screen resolution from 800 x 600 to anything better.
View 4 Replies View RelatedI have a centos 5.5 server, without a monitor connected to it.Sometime i need to connect to it with VNC, but maximum resolution is 800x600.How can i increase it at least 1024x748 ??I tried in system-config-display changing the monitor to a generic CRT 1024x768, and rebooted.But only allowed resolutions are 800x600 and 640x480.
View 6 Replies View RelatedJust installed F11. Been totally frustrated all day and all night with resolutions and DNS bugs. I installed system-config-display so I can get my video working properly. However, my monitor says it's out of range only on the login screen. How can I change the resolution for the login screen to match that of my working environment?
View 1 Replies View RelatedHow do you get to the place to change the screen resolution through the menus in Fedora 13? When I couldn't find it, I ran gnome-display-properties, changed the resolution, restarted, and when it started back up the resolution was not changed!
What is the recommended way to change the screen resolution?
it will NEVER let me change the screen resolution to 1440x900. It never gives me the option. I then spend hours looking for fixes, making Xconf files and editing them to no avail. The same is true for Fedora 15 (Beta). what can i do to get the 1440x900 option in my "Display" list in Fedora.
View 2 Replies View RelatedI've recently upgraded to Ubuntu 10.04 LTS. When I boot up I see this:
[URL]
in a very low resolution
At the login screen and on the desktop my resolution is 1680 x 1080
Is there a way to make the splash screen that resolution as well?
I like many of its features. But i cant change the screen resolution from 800 x 600 and the monitor type is set to unknown... I tried googling to find a solution but i didnt succed.. Atlast i gave up and tried fedora.. fortunately fedora detected my monitor and i was able to change the resolution.. It is also another linux distribution but why not ubuntu...?
View 1 Replies View RelatedJust Installed the latest version of Ubuntu Netbook on my Toshiba Portege 7200 and the screen resolution is set to 800x600. The OS is not recognizing the fact the laptop can do 1024x768. I've been searching the net for a few hours to fix the problem and I'm not getting anywhere. The fix to the problem is to add the info below to the Xorg.conf file. This file does not seem to exsist on the latest version and if I create it manually it does not work.
# xorg.conf (X.Org X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using values from the debconf database.
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only* if it has not been modified since the last upgrade of the xserver-xorg package.
# Note that some configuration settings that could be done previously in this file, now are automatically configured by the server and settings. Here are ignored. If you have edited this file but would like it to be automatically updated again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Trident Microsystems Cyber 9540 (rev 52)"
Driver "trident"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Integtrated LCD"
HorizSync 28-90
VertRefresh 43-85
#Modeline "1024x768_60.00" 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync
#Option "PreferredMode" "1024x768_60.00"
EndSection
Section "Monitor"
Identifier "VGA-0"
Option "Ignore" "true"
EndSection
Section "Screen"
Identifier "Screen 1"
Monitor "Integtrated LCD"
Device "Trident Microsystems Cyber 9540 (rev 52)"
EndSection
I need to know how to change resolution on the screen and monitor
View 5 Replies View RelatedI can't change scrren resolution in ubuntu linux.It's having only one size.which file i need to edit.
View 14 Replies View RelatedI just installed Simply Mepis 8.0.15 for a friend but the screen resolution is 800 x 600, how do I change that to 1024 x 768?
View 9 Replies View RelatedI have just installed openSUSE 11.2 on one of my computers... the desktop resolution is correct, however the welcome screen resolution is not... How do i change the welcome screen resolution?
View 4 Replies View RelatedI cannot change the screen resolution down from 1680x1024 (or whatever the default is). Sometimes the task bar disappers, or I get a 'split-screen' effect. I have low vision. I need the old 1024x768 resolution.
I have tried Ubuntu, and many of it's derivatives eg, Linux Mint, Ultimate Edition, and yesterday with Zorin, that seems to be getting good reviews at the moment, and they all have the same problem. Older versions of 'buntu did not have this problem, only 10.04 and 10.10.
I have a standard desk-top pc - Pentuim IV using the on-board Intel graphics, and a Dell monitor.
This is VERY frustrating. Ubuntu is very common and widely-used. The only solutions I can find on the 'net have to do with reconfiguring the X11/xorg file, except there isn't one anymore. This is ridiculous. It should just work. Suse Linux and PCLinuxOS work on my hardware. Why not Ubuntu? By the way, I am not a newbie. I have been using Linux for the last six years, experimenting with different distro's.
If someone could shed some light on this, I would be most grateful. I don't believe I'm the only person who has had this problem, but there is very little infornmation on it.
Now that I'm more lucid I can adjust the format a bit. If I try opening the TTY the screen goes completely black after visualizing few artifact on the bottom of the screen.
Pressing Ctrl+Alt+F7 brings me back safely to the GUI
So far I tried to modify the /etc/defaults/grub file to uncomment the grub resolution and the grub_terminal to no avail. Now at least it seams to waste some less time to load the grub (it took something like 15 sec before) but it lost the previous green/torquoise background and now it's white char on black background.
On a side note pressing C on the grub to reach the grub console gave me some answer I don't know how to deal with... I was trying to use vbeinfo but it didn't found the command and so I tried the insmod:
Photo(large) of the complete grub console session wrote:grub>
grub> videoinfo
List of supported video modes:
Legend: mask/position=red/green/blue/reserved
grub> videotest
error: no suitable video mode found.
grub> insmod vbe
error: file `/boot/grub/x86_64-efi/vbe.mod' not found
I upgraded my opensuse from 11.2 to 11.3, but after it, I have several problem with it.
Firstly: My graphic card is intel hd4500 and motherboard chip's is intel G41. After upgrading, I understood suse 11.3 didn't have sax2. at a result. I have problem with graphic card driver and consequently can't change screen resolution, therefore after each restart, my resolution automatically fix to 1600x1200 but I would like to set it in 1280x1024? What can I do to change it permanently?
Secondly: I installed vmware workstation 6.5 and after it, I see a message that say vmware need to Kernel Header 2.6.34-12- desktop. I install kernel-syms, kernel-source, gcc and make but doesn't run yet. What happen for it?
I am trying to change the default screen resolution in Run Level 3 to 640x480. I have tried changing the menu.1st file and the vga=0x301 mode sticks until the system begins to boot and then resets to a higher resolution. This system does not have X, or Sax2 so no go on those options. This is OpenSuse 11.3 x64.
View 6 Replies View RelatedAfter update from 8.10 to 9.10 I have screen resolution 1440x900, which is not supported by my monitor. Following changes had no effect on my screen resolution
xrandr:
Code:
$XAUTORITY=/home/zuker/.Xauthority DISPLAY=:0.0 xrandr --output default --mode 1024x768
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
xorg.conf
Code:
Section "Screen" ...
Subsection "Display"
Depth 24
Modes "1024x768"
Virtual "1024 768"
EndSubSection
what is the command or man/info page that show how to change screen/monitor resolution while in the bash shell?
View 1 Replies View RelatedI am using HP Mini 1000 Series with Ubuntu 10.10 (later installed with xubuntu-desktop). I want to run a wine application which requires 800x600 resolution. However, my current resolution is 1024x576. The other available solution is 640x480. Previously, I used pre-installed Windows XP, it allows me to change the resolution to 800x600 by clicking the "List All Modes" button at the display setting, then I can choose the 800x600 resolution. So, I think HP Mini is also able to support 800x600 screen resolution. May I know how can I do it in Ubuntu?
View 1 Replies View RelatedDoes anyone know if there's a command I can put in Terminal to change the screen resolution?
View 3 Replies View Related