my new system is redhat enterprise 5, i have changed 2 keyboard and used 2 input(fcitx and scim), the same question is that the system can not receive quotation marks,i can not use quotaion key input double quotation marks or single, badly.
View 2 RepliesI tried to move a file from my desktop to another folder; moving it was not allowed, for some reason. Neither was opening it and saving a new copy in the target folder. Would that be because the filename contains double (") quotation marks? Are they not allowed? The filename is Edit of Bob's "Lady Liberty" Article.doc. [Filename not enclosed in quotation marks here, to avoid confusion.]I just changed the double quotation marks to single quotation marks; that solved everything.
View 2 Replies View RelatedI want to add double quotation marks to contents of an column ,the column contains over 7000 cells with content already,so it would be heavy task to add "double quotation marks"one by one.Is there any way to do that quickly on Libre office?
View 1 Replies View RelatedI want to put a string, such as the one found in the image, into an array that will later be chopped into individual words and put into another array of individual words found in the initial string. (or, perhaps, I would be able to do that initially, but for now, that is the goal)My question is, how can I do that without using quotation marks?
View 5 Replies View RelatedWhat should the quotation marks be in red?It returns an error:SELECT * FROM blog WHERE id="51586430" blog LIMIT 1; SQL error: unrecognized token: "" Incomplete SQL:
View 3 Replies View RelatedI'm writing some code to speed up some code writing, basically it produces some code I use in every project. I produce the outputs with fstream filestr;, open a file and write to some data to it. However some code has quote marks that I need to output, however I can't use quote marks.
EG: filestr<<"#include "Header.h""<<endl;I get round this with some awful filestr.put ('"');However I'm sure there must be a straight forward way to do this. Can anyone advise?
Columns are separated by SPACE. Column 5th is in quotation marks. How can I ask AWK to read everything between quotation marks ?
View 4 Replies View Relatedwhat is the purpose of the parameter within single quotation marks and what it does? I am assuming it is a call to pkg-config with those paramaters.
Code: Select allgcc -o gtkprog gtkprog.c `pkg-config --libs --cflags gtk+-2.0`
Using:
Code: Select allpkg-config --libs --cflags gtk+-2.0
-pthread -I/usr/include/gtk-2.0 -I/usr/lib/x86_64-linux-gnu/gtk-2.0/include -I/usr/include/gio-unix-2.0/ -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libpng12 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng12 -I/usr/include/pango-1.0 -I/usr/include/harfbuzz -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/freetype2 -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lglib-2.0 -lfontconfig -lfreetype
So, if my logic serves me right, this command parameter is a neat replacement for this litany of libraries to be used in the compilation process.
My laptop's been locking up in Linux (Ubuntu, Backtrack, Puppy) periodically for a while now. When it locked up, it was always immune to the magic of SysRq, which I thought might indicate a hardware problem. It became so bad that I had to stop using the laptop.
Today, when I turned it on and tried to boot into Fedora 12, I got the following error (just once, it just locked up at various points during the splash screen after this once):
double fault: 0000 [#1] SMP
last sysfs file:
CPU 0
odules linked in:
Pid: 1, co m: swapper Not ta nted 2.6.32.11-99.fc 2.x86_64 #VGN-T 250N
RIP: 0010:[<ff
All the seemingly missing letters were really missing, not my typos.
As you can see, kernel version is 2.6.32.11-99.fc12.x86_64 and my laptop is a Sony Vaio TZ 250N (Core 2 Duo ULV 1.2GHZ). Note that with the other remaining kernels from the updates, nothing ever happened other than the locking up. The core temperatures hover pretty high, about 55-60C peak but this is still below the critical temp. Memtest came up clean when the problem first started happening.
I want to use SED to do the following: In a text file replace any occurrences of the three character string ZZZ with a quotation mark "and. replace all occurrences of a comma with a semi-colon. It is the S/ / / command which is stumping me on the first issue...inparticular how to get the replace string to be quote.
View 9 Replies View RelatedIn the rpm manual, Print 50 hash marks as the package archive is unpacked. Use with -v|--verbose for a nicer display. But actually, there're not enough hash marks when I'm installing a package. About 44 hash marks there...Well, I just want to know where the `50 hash marks' are.
View 4 Replies View RelatedI have created a very simple spreadsheet - using gnumeric - with small numbers and simple formulas - the numbers fit easily inside their cells - the formatting all seems in order BEFORE I try to print. When I set up the spreadsheet for printing - and "print preview" the document, I see hash marks in place of numbers in a majority of the cells. When I print the document, the hash marks are printed, in place of the numbers. When I view the document under normal circumstances, for editing - the hash marks are not present. All seems well. I cannot print the spreadsheet without the hash marks (#####) appearing!
View 1 Replies View RelatedIn bash I need to use some equivalent of double quotes inside double quotes (or the other way around.)I need to run the following statement to get the output of foo and store it in a variable while passing foo the $file which probably contains spaces.
Code:
variable=$(foo "$file")
The problem is that foo might return an empty string and if it does I need to catch it
[code]...
Add to your repositories
perl
and manually
"http://download.opensuse.org/repositories/security/SLE_10/"
[code]....
triangles for pointer position on rulers leave marks this is the bug.
[URL]
this links bug report
[URL] system fedora fedora 14 64 bit and inkscape 0.48.0-1.fc14.3 video card is gforce 7300 gs proprietary driver.
I have added a Latvian keyboard layout to my Ubuntu 9.10 system (Russian as the system language). I cannot type Latvian letters with diacritical marks. I chose an apostrophe-based keyboard layout, so that I get the letter I need by pressing an apostrophe before. For example, to get ā, I would press 'a.The problem is, when I press ' followed by a letter or space bar, nothing appears on the screen. I continue typing as normal, but each time I press an apostrophe, the next character I press displays nothing on the screen. I have tried installing a Latvian language pack through System -> Administration -> Language Support. It was generally a useful addition. But it did not solve the problem. I still could not type Latvian. After that, I tried removing the Latvian layout from settings and adding it again. It did not help. I tried removing the layout, restarting my computer, and adding the layout back. The problem was not resolved.
I have tried different Lativan layouts (with tilde, with F, and standard). I had the same problem regardless of the layout I used. I browsed dozens of forum threads, and in one of them I found a workaround for this problem. For example, to type �, I hold down Shift and Control together, and while holding them press u0160 (because 0160 is a hex code for � in the character map). The first 0 is not significant, so to save time I type u160. I looked up the hex codes for the letters I need in Applications -> Accessories -> Character Map. In that application, at the bottom of the window, for each letter there is a code U+(four hex digits) e.g. U+012A. I wrote out all the codes I need on a small paper slip and stuck it to my monitor.Entering symbols this way is rather inconvenient. But at least it is possible.How to enter Latvian letters using just a Latvian keyboard layout? Is it a bug I should file? Would be great to find out.
Maverick Meerkat 10.10Type 'yes' in the terminal without the quote marks and hit enter causes a loop, cpu starts to run high.
View 3 Replies View RelatedI recently got a real fancy unidirectional microphone, but when I go and use it, something strange happens. The mic is a mono mic, but when I record something, it appears to think it's stereo. Instead of having the same thing on both channels, it puts it all in the left channel, and silence on the right channel.
I tried fiddling with alsamixer. In capture (F4), adjusting the "Capture" device has an effect. However, it doesn't do anything useful. Lowering the right channel to zero does nothing, lowering the left channel to zero creates silence, and disabling the right channel creates silence.
In my System>Preferences>Sound (or pavucontrol, or what-have-you), there are "Analog Stereo Input" and "Analog Stereo Duplex" options there, but no "Analog Mono Input" or "Analog Stereo Output + Analog Mono Input" options (the latter being ideal).
Something interesting, though, if I do this:
Code:
arecord -r 96000 -D pulse -c 1 -vv -V mono /dev/null
it works correctly and outputs on both channels. But if I do
Code:
arecord -r 96000 -D pulse -c 2 -vv -V stereo /dev/null
then it's back to the same behavior. The VU meter on the second command shows the left channel going up and down as I make noise, but the right one always at zero.
The machine does have a crap internal mic built in to the screen bezel. If I do either of the above commands, they both work correctly. The stereo VU shows the same activity for both channels.
The machine is a Eee 1015PED, which has Intel integrated sound. Something probably insignificant is that the mic has a 1/4 inch mono plug, and to get it to plug into the Eee, I needed to get a 1/4 female to 1/8 male adapter. The mic's 1/4 plug is mono (duh) and therefore two-conductor, but the adapter I got is stereo, or three conductor (L, R, GND). I don't know if this is tripping something in hardware to tell it it's stereo or something.
I tried the mic on my desktop, which has a SB Audigy 4 (the non-pro flavor) and that has the "Analog Mono Input" function, so that works fine. Is there some way to turn this stereo input into mono input?
I installed Lucid. I used to have Ubuntu 9.10 and to connect my iPod to my laptop's speakers. There was an option in 9.10 in the Sound Options to change the Mic Input into a Line Input. But now unfortunately I can't find it in Lucid have only 2 audio ports in the laptop: Headphone port, Mic port.
View 9 Replies View RelatedI would like to use Japanese kana (hiragana, katakana, kanji) on Ubuntu but everything that I've tried to get it set up and running isn't working. The Spanish that I have set up is working perfectly so far.
I've read, the SCIM input program should start up automatically when loading a program, it doesn't. When I have it loaded I cannot seem to get the input working.
I can't get Thai language input to work.
In "language support" I installed Thai, but it remains grayed out.
In "ibus preferences / input method", no languages are shown.
I added:
I added: "ibus-daemon --xim" to startup applications. No effect.
How can I show "space" as "-" or other marks in gEdit?
View 1 Replies View RelatedI need a Linux O.S. to double-boot with Win7 (already installed). It should be user-friendly, have a tv player (Myth TV?) already installed and as-far-as-possable already configured for my tv stick..Avermedia. Emphasis should be on multimedia..with good video decode/encode possabilities. I`m considering either Mythbuntu or Linux Mint.
View 3 Replies View Relatedwhats the different between Chain RH-Firewall-1-INPUT (2 references) and Chain INPUT (policy ACCEPT)?
View 1 Replies View RelatedI have a custom LXDE installation with mostly the core applications. (Read my signature for a better picture.) Because it is custom I do not have the option to double click and run a Linux (not Windows) executable file. When I try to open the application it says choose an application to open it with. Do I have to install an application like gdebi (except for Linux executable) to be able to just double click and run it?
View 5 Replies View Relatedwhen I login through SSH, I get a double welcome message:
login as: laurent
laurent@192.168.1.2's password:
Linux server 2.6.32-31-generic-pae #61-Ubuntu SMP Fri Apr 8 20:00:13 UTC 2011 i6
[code]...
I am currently using Windows Vista and Linux Ubuntu (I'm not 100% sure which version).However, whenever I start up my PC, I get greeted to the HP BIOS screen, and then after that, I get the Windows Bootloader.Now, this is where things get interesting:If, on the Windows Bootloader I select Microsoft Windows Vista, it loads Vista.If I select Ubuntu on the Windows Bootloader, I get treated to a second bootloader (I assume the Ubuntu Bootloader).I'm wanting to remove one of the bootloaders (keeping Vista as my primary OS, but still having access to Ubuntu in the bootloader). As a result of this, which bootloader should I remove, and how would I go about removing such bootloader?
View 2 Replies View RelatedI have a virtual machine in a natted interface vmnet2. Ports are forwarded correctly into the virtual machine, but my host does not forward correctly the ports to the outside world. for example, when checking if the port is open i sniffed on the phyisical interface and saw only the "syn" packet going to the virtual interface. Inside the virtual interface i saw the same "syn" packet. the virtual machine replied with "syn, ack" and then it got a "rst" from my host.what could go wrong? how come this "syn, ack" packet not going back to the physical interface?
View 2 Replies View RelatedI have a file like this:
Code:
I need to search it backwards for "notable line" strings AND the first numeric string preceding that line. I've discovered that it's easy to search backwards by tac file | grep pattern, but how to tell grep to continue searching from where the pattern was found? In short, I want to make the output of the example above into this:
Code:
Or I must use another tool, like awk or sed? If so, how do I do so?
I've been getting a weird display on my Mac iBook G3 power PC W/ Dual USB.This has happened on Kunbuntu 9.04 PPC and Ubuntu 9.10 PPC. Both are standardnstalled fully patched.Attached is a picture of the display as you can see the right 2 inches is black and 2 inches from the bottom is where the display start over again.
View 2 Replies View Related