Why am I not able to telnet to a Windows server machine? Is it because the telnet server is not running there? A remote desktop connection works though.
Does a telnet server run by default on a Unix machine?
I have been trying to shutdown a remote XP machine but cannot get it to budge. I did the following on the Windows box:
Ensured no firewall
Started Remote Registry Editing service
Shared a network drive (to enable file sharing?)
Created a user 'shutdown' specifically for shutting down
Added 'shutdown' to Administrators group
Added 'shutdown' to the list of allowed shutdown users in gpedit.msc
Here's what I have tried:
From Windows 7 box:
shutdown -m computer (Access denied message)
psshutdown -m computer (Access denied message)
runas /user:computershutdown "cmd /K shutdown -m computer (access denied)
runas /user:shutdown "cmd /K shutdown -m computer (access denied)
From Linux box:
net rpc shutdown -I computer -U user%password (says shutdown succeeded) rpcclient -I x.x.x.x -c shutdown -U user (gives usage message)
linux 5.4(RHEL) and window machine are pinging nicely.able to access window on linux but not linux at window(xp)? xinetd is running on linux as well as telnet service is also running on xp.
View 1 Replies View RelatedI am setting up Ubuntu to be a firewall type device for a windows computer. (I later want to use Internet sharing or something like that.) The Ubuntu machine has two NICs. The internet NIC works but one light is always orange (even when there is no patch cable connected to it). I can access the Internet fine from the Ubuntu machine. I have a cross over cable connected to the second NIC. This cable connects to the Windows laptop. The windows laptop can ping the Ubuntu machine. But I cannot ping the windows machine from the Ubuntu machine. When I try to telnet to the Ubuntu machine from the Windows machine (over port 23 or 80) it says "cannot connect."
From the Ubuntu machine I issued this command:
# iptables -A INPUT -p tcp --dport 80 -j ACCEPT
I used ufw status and found that the firewall was not enabled on the Ubuntu machine. The default gateway of the second NIC is the IP address of the Windows machine. The default gateway of the Windows machine is the IP address of the Ubuntu machine.
I'm using something like telnet [URL] 25 and it comes back as not being able to connect to host on port 25. I don't have port 25 blocked anywhere. I turned off the firewall and even opened up port 25 on the hardware firewall router. If I ping it I can connect.
View 2 Replies View RelatedI am having problems logging into my SME Linux server from a new Windows 7 machine. It sees the server on the network, but does not seem to be passing the windows login through to the Linux server (which is how all of the XP machines log in). When I try to log in using a valid username and password it goes nowhere and just says it is an invalid username and/or password. I had a Vista machine that could log into this Linux server so I do not think the Samba version is the problem.
View 2 Replies View RelatedI was just checking the configuration file of /etc/xinetd.d/krb5-telnet and i thought of enabling the telnet.I modified the configuration file accordingly and restarted the server.
Code:
# cat /etc/xinetd.d/krb5-telnet
# default: off
[code]...
i am on CentOS 5.5 ,and unable to do the Telnet. SElinux is in Permissive mode and firewall is off. below are the details for the help. i tried it before and after disabling the firewall and SELinux.
[Code].....
I need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.
View 7 Replies View RelatedI need to deploy Windows Server 2008 R2 onto a server that is currently running Linux. Effectively, I want to restore a Windows disk image onto the Linux system hard disk.I don't have physical access to the machine, so I need to find a way to do everything remotely, using SSH (no KVM). And the Linux machine only has one hard disk - the one containing the OS. However, I might be able to create a partition in free space at the end of the hard disk to store the image (I might need some help with the Linux commands). Or perhaps the image file can be pulled via FTP.
I tried Acronis but was disappointed to find that it doesn't seem to allow me to overwrite the system partition (unlike the Windows version of Acronis, which is capable of doing this with a restart).
I'm a web developer and I am building a site on a CMS that has issues moving from a WAMP server to LAMP. The live server is LAMP and I am running Windows 7. I don't want to run into problems moving from the test server to the live server, so I was wondering if I could somehow run Linux using a virtual machine (using Windows Virtual PC which I think supports Linux or VirtualBox) and then using a Linux equivalent of WAMP2 server as a test server. how to do this and what the best Linux distribution to use would be?
View 2 Replies View RelatedI have an Ubuntu Desktop 11.04 virtual machine using VirtualBox on my Windows 7 system.
Up until now I have been doing all my development within the Ubuntu environment but unfortunately, I don't like it. I want to move back to Windows, which is much more familiar to me but I would still like to access the virtual box like a virtual server as it is already set up with Apache, PHP, Pear, Git etc...
How can I make the two work in harmony? I essentially want to be able to start the VM and connect to it as if it was a server machine somewhere on my network, without having to actually buy another machine to put on my network.
I am having issues mounting a share on a Windows 2008 Server from all of our Redhat 4 machines. I am trying to back up files before wiping and upgrading them to 5. I will try and post as much information that I gathered after trying different things. I am a newer hire for this network and a Linux newbie.
The scenario is this:
1. Windows 2008 Active Directory.
2. Redhat Enterprise 4 machines
I have root access and I tried entering at the terminal:
" smbclient -L "servername" -U "username"
get the "password" prompt I enter my password and get:
"session setup failed: NT_STATUS_ACCOUNT_LOCKED_OUT."
I check event viewer on the 2008 box and last week was seeing:
Event ID: 4625
Keywords: Audit Failure
etc, etc
"Account for which Logon failed:
Security ID: NULL SID
Account name: anonymous
Account Domain:MYGROUP
Failure Information:
Failure Reason: Uknown user name or bad password
etc, etc
Now the last couple of days the audit failures have not shown up on the 2008 Server box even though I attempted to log in.
The end users used to just use Konquerer smb://"servername"/"share" and it worked but for some reason starting last week this no longer works. Nothing was changed that I know of, this network is in a sealed classified environment with no external access. All additions to the network are monitored and no unapproved software is installed. The lab is in a vault type environment and only a few people know the combination and alarm pass codes so no chance of somebody adding stuff without me knowing it.
I would think with the locked out message it was an issue with my user account but that works fine on the Windows side so I tried my Linux credentials with no success when trying to mount the directory.
Is there something anybody can suggest Linux or Windows side to check? No user accounts work connecting to the Windows share.
p.s. I am aware the above command is only to see the Windows shares but i get the same thing when I just try and mount using CIFS or SMBFS.
I would like to use an extra physical hard drive in my linux server to provide my wife a place to backup her Windows XP desktop.I am willing to format this drive as NTFS (or anything else) and have it dedicated to this purpose. I am wondering what is the easiest way to proceed?
View 1 Replies View RelatedI have a directory on my server at /home/dave/www/images/site (ext3) which I want to mount directly to my Windows computer so that I can transfer data easily via command line tool. Is that something possible?
View 4 Replies View RelatedWill there be any issues installing and then subsequently running a Microsoft Windows Server 2008 R2 installation on a VirtualBox VM on a Linux host (Ubuntu 11.04 64-bit)? I require Windows Server 2008 R2 for a course I'm taking, and I dont have any systems to install/deploy it onto.
Host Machine Specs:
Ubuntu 11.04 64-bit
4GB RAM
350GB Disk Space
Nvidia Quadro system
I have configured NIS, DNS, NFS and DHCP servers at my home network. I can easily authenticate another Linux machine to these servers and make that machine as a client and also users can locin using the automounter. My Question is, is it possible that by using the same setup I can authenticate a windows Xp machine and make it as a client, and also users can login using the passwords that I have provided on my NIS server?
View 1 Replies View RelatedI have 30 systems in a LAN . My users need to login as domain user from their XP clients and store their files in the Linux server. They should not be allowed to store in local machine and also should be granted a particular size of space in server.
what are the procedures to be done in linux server and
just like in windows we access shared files in by typing in run command
\192.168.0.1 is there a provision to view shared files from xp to Linux
My system is Ubuntu 11Before I typed "telnet localhost" or "telnet localhost 23". I have make this work below:$sudo apt-get install xinetd$vim /etc/xinetd.conf
defaults{
instances=60
log_type=SYSLOGauthpriv
[code]....
I did followings:
Code:
But got:
Code:
But as I tried:
Code:
It's OK.
I was looking for:how to access my Linux machine(OpenSuse 11.3) that is being hosted at my hoster company from my home Win Pc, I found TightVNC , but I am confused, should I install it on both systems ( viewer and server) ? .. what about the VirtualBox , can i Access with that tool or it is only for mounting the local Virtual Machines?
View 2 Replies View RelatedI have been searching for the past hour trying to figure out how I can enable telnet on my Ubuntu 10.10 Virtual Machine.I am using VirtualBox to run my VM. I am trying to access that VM using PuTTy but most everything I have seen says I have to enable telnet first.The directions that I have found say to go to System > Administration > Services and enable telnet.I have nothing called Services under Administration.
View 9 Replies View RelatedI'm a computer technician and I'm interested in learning Linux. I did some research about the different distributions last night decided to try Fedora. I downloaded the latest version of it and installed it onto a brand new machine in my office. Is there a website out there that I can use as a guide for all of the Linux commands. I know that if I wanted to I could just learn my way around the gui, but I want to REALLY learn Linux. I also want to be able to telnet into the machine so that I can access it remotely. How can I set that up? I installed Fedora with all of the default settings and didn't change anything.
View 4 Replies View RelatedAs a Windows user, I generated a pair of DSA keys from CoreFTP Lite and sent it to a third party that runs an SFTP server. They told me that a valid DSA key needs to have ssh-dsa at the start and the username@systemname at the end. CoreFTP generated neither the ssh-dsa header nor the username@systemname footer. I tried with WinSCP and it didn't generate them either. Is there a difference between how SFTP works between Windows and Linux? If I put a useraccount@systemname at the end of the text will it work? How would the Linux system validate that my system is called "systemname"? If it can't validate, what is the purpose of adding it?
View 2 Replies View RelatedI'm the Administrating the computers in my office. I want to monitor the user's activity. How can i remote login without distrubing the user's activity on his computer? Any software need to be installed? (I don't want to use Terminal server client).
View 5 Replies View RelatedI would like to make a telnet connection to one server. I can't do this at first beceause i necesary to connect to another server. I use the program putty and this is the command to connect to my first machine:
[Code]....
there are many telnet sessions with same login. somebody is always broadcasting message how to know the ipaddress of that machine.
View 1 Replies View Relatedinstalled nagios on rhel 5.4_64 bit machine. now wants to monitor windows hosts using nagios,but not able to installed NSClient++-0.3.8-x64.msi error found while installing this package not supporting your processor type and 2203 error.
View 5 Replies View RelatedI did chmod -R g=rwx on /bin , /sbin
now I can not connect to the machine using root through telnet, ssh, scp, rsh or any means.
Trying to setup Samba for the first time and am unable to connect to the share from my Windows machine. It is a very basic setup, just trying to setup a single share to use a backup location for my windows files.
I've done the following:
1. Fresh install if fedora 15
2. installed samba
rpm -qa | grep samba
gives the following:
[Code].....
3. Used samba server configuration to setup the share and create the samba users
4. When I tried to connect from my windows machine I get the error that the server is not accessible, you might not have permission to use this network resource or I get the error "windows cannot access server, check spelling and try again.
Both computers can ping each other. I opened samba ports in the linux firewall and tried to connect again: same error Disabled firewall all together and have the same error. Here is the output from the testparm command
[Code].....