i am on CentOS 5.5 ,and unable to do the Telnet. SElinux is in Permissive mode and firewall is off. below are the details for the help. i tried it before and after disabling the firewall and SELinux.
[Code].....
I was just checking the configuration file of /etc/xinetd.d/krb5-telnet and i thought of enabling the telnet.I modified the configuration file accordingly and restarted the server.
Code:
# cat /etc/xinetd.d/krb5-telnet
# default: off
[code]...
Why am I not able to telnet to a Windows server machine? Is it because the telnet server is not running there? A remote desktop connection works though.
Does a telnet server run by default on a Unix machine?
linux 5.4(RHEL) and window machine are pinging nicely.able to access window on linux but not linux at window(xp)? xinetd is running on linux as well as telnet service is also running on xp.
View 1 Replies View RelatedMy system is Ubuntu 11Before I typed "telnet localhost" or "telnet localhost 23". I have make this work below:$sudo apt-get install xinetd$vim /etc/xinetd.conf
defaults{
instances=60
log_type=SYSLOGauthpriv
[code]....
I did followings:
Code:
But got:
Code:
But as I tried:
Code:
It's OK.
Hey even I'm not able to telnet to IPv6 address on port 23
View 2 Replies View RelatedI'm using something like telnet [URL] 25 and it comes back as not being able to connect to host on port 25. I don't have port 25 blocked anywhere. I turned off the firewall and even opened up port 25 on the hardware firewall router. If I ping it I can connect.
View 2 Replies View RelatedI am trying to find the difference between the above two services. Both are under xinetd and can someone please explain the difference between them (is one more secure than the other one?)
View 1 Replies View RelatedI need to open a telnet session using a shell script that follows this format:
telnet 10.100.0.1
expect "Password:"
send <password>
[code]....
send "pen" (till the end of lines generated as in |more.... usually we use like 8 space bar buttons after "pen" to generate all)
and I want to redirect the whole generated result of "pen" to results.
when i try a telnet to a host like that: telnet 10.10.10.10 1234 i got this: telnet: Unable to connect to remote host: Connection refused.
1/ does this mean that the problem is not due to a firewall, but that the host 10.10.10.10 doesn't listen on the port 1234? other way does this mean that my firewall is authorizing traffic on the port 1234?
and when i try a telnet on another port like that: telnet 10.10.10.10 1235 i get: Trying 10.10.10.10 ...
in this case this
2/ does this mean that the firewall is blocking the traffic between my host and the 10.10.10.10 on the port 1235?
I am running CentOS 5.1 on VMware on Win 7 On CentOS I added Bridged network adapter and the server is connected to internet without any problems, but when I telnet any server on port 25 I get connection timeout.
Code:
telnet f.mx.mail.yahoo.com 25
Trying 98.137.54.237...
telnet: connect to address 98.137.54.237: Connection timed out
telnet: Unable to connect to remote host: Connection timed out
I stopped all servers, iptables and sendmail on the linux server and the firewalls on the win 7 but still getting the same error! I added new network adapter ( host-only ) and tried to telnet the win machine from vmware Linux but I got connection refused
Code:
telnet 192.168.71.1 25
Trying 192.168.71.1...
telnet: connect to address 192.168.71.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
[code]....
When i am trying to telnet to a machine connected in our LAN ..
telnet: Unable to connect to remote host: Connection refused
What's the reason for this? how do i establish a connection? I am using ubuntu 10.04.
Just setup my postfix and trying to telnet localhost.
here it is..
telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Connection closed by foreign host.
I wanna paste my /var/log/maillog but i don't know how, when i copy from putty screen it's only copied part of the log.
btw i found one similar problem here [URL] but the thread starter already lost the pastebin so i don't know how he resolved the problems.
I am doing some R&D on 11g RMAN in oracle at home. i have installed oracle enterprise linux and i have installed oracle software. when i am trying to configure listener, it is error-ed out. i have verified that telnet with the port is not working and i am seeing connection refused error.
View 3 Replies View RelatedI have recently upgraded to a VPS for the purpose of web hosting a group of sites related to my business.The reason for the upgrade was because we wish to run a shopping cart software which required greater memory for PHP and the VPS was the most economic solution. So, I have very basic linux knowledge but I am the definition of a newbie when it comes to going further than just scratching the surface of server configuration! I have successfully hosted our main site for a number of weeks but recently the postfix service stopped sending mail. I have Plesk Control Panel installed and postfix continually shows as not started even though in SSH the service status is definitely running - I have gone through the troubleshooting checklist here (http://www.postfix-book.com/debugging.html#d0e6) but can't get any further than section 2.1 as when running the host command (#host relay-test.mail-abuse.org), I get # -bash: host:command not found. I've gone further in the document but not found any issues...
When postfix was working properly (i.e. sending emails!), the plesk CP showed the service as started and all emails from the website were sending as normal. The mailq command is showing the messages stuck in the mailq and the maillog shows the following:- http://pastebin.centos.org/36446 - these are the latest few pages.To check the configuration and basic elements I have flushed the mailq (which shows a stack of messages waiting) and I have also spent a long time (2 weeks) reading up on the parameters that should be in main.cf and master.cf.I have found that when I 'telnet localhost 25' I get the following response...[root@s15397216]# telnet localhost 25Trying 127.0.0.1...Connected to localhost.Escape character is '^]'.
I have opened/added the ports 1812 and 1813 (both tcp & udp) for radius server in the firewall.
when i use the command : telnet localhost 1812 , the connection says "refused", i get the following messages code...
I'm trying to make an SSH script for my place of employment. This script, I want to go out to the server hostnames we have specified (in another file) and change a users account password. We use Kerberized telnet, so if telnet root hostname fails, I want it to use ssh username hostname and use the old password (specified). If both fail, I want it to ask the user what the port should be and input the port in the ssh command.
But I'm having a issue having it try telnet root hostname and if it fails then, try to ssh in, I have no clue how to have it proceed. Is it an if statement? Here's the telnet failed message: telnet: Unable to connect to remote host: Connection refused
I want to allow only ip segment(212.154.75.0/24) to telnet the server(RHEL-7.3).How this can be done using iptables?In the server i gave this command:
# iptables -I FORWARD -s 212.154.75.0/24 -p tcp --dport 23 -j ACCEPT
output is
0 0 ACCEPT tcp -- * * 212.154.75.0/24 0.0.0.0/0 tcp
[code]....
i set up a MAC power pc with ubuntu. i can ssh into it, but i cannot telnet. this is what i get when i telnet to the host i can only telnet to port 80
[Code]....
i have a telnet client src rpm. I need to make some changes in the src and recompile it. i am having problems recompiling src rpm
View 5 Replies View RelatedI would like to make a telnet connection to one server. I can't do this at first beceause i necesary to connect to another server. I use the program putty and this is the command to connect to my first machine:
[Code]....
how do I setup/enabled telnet access only for particular directory, when any user log-in on to my server, he gets something like below pattern on to remote server, and only login to specified directory, also he need to run few bash commands.
[ravi@mydomain00 ~]$ telnet mydomain.com
Trying 127.0.0.1...
Connected to mydomain.com (127.0.0.1).
Escape character is '^]'.
[Code]....
I need to make a test on Fedora 8, with a Telnet... and seems NOT to beenabled.The package is installed, but if I have a look into /etc/xinedtd thereis no TELNET file ?Is there any changes into FEDORA 8 ? How to I configure Telner in Fedora 8 ?
View 6 Replies View RelatedI am trying to open the telnet port on my system with port 4100 and for the same i have inserted the entries in iptables file using below command./sbin/iptables -A INPUT -s 132.186.208.83/24 -p tcp �-dport 4100 -j ACCEPT.
View 1 Replies View RelatedI have a temlnet problem -telnet 192.168.0.4 1004 failed.
At 192.168.0.2, "telnet 192.168.0.4" make connection successfully at port 23, however "telnet 192.168.0.4 1000" does not make connection at port 1000.
I've tried searching for this peculiar behavior, but couldn't find a solution that works for it - I have installed Redhat on my system and have a listener running on port 7878. I wanted to check if the port is accessible from a machine on the network, and so i telnet-ed from a remote machine and it worked. Now comes the weird problem - I used the same command (telnet xxx.xxx.xxx.xxx 7878) locally and it was able to telnet. However, if I try to connect using localhost, meaning, "telnet localhost 7878" or "telnet 127.0.0.1 7878", it gives me the following error:
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
Here is my /etc/hosts entry:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
[Code]....
Not sure where the problem is. I expect telnet to connect irrespective of whether i use the IP address OR localhost when i use telnet locally.
How to eneble telnet in linux based os?
I'd tried this command:
telnet my pc ip & name
I want to run a command every time I log in to my Ubuntu box, but only if I'm connecting through telnet, not if I'm logging in at the console.
View 1 Replies View RelatedSo I have a script that is supposed to check to see if a mail server is up and responsive. What I want to know is how I can send it the telnet escape character. I've tried:VAR=`(sleep 5;echo quit) | (telnet mailserver.timbuktu.net 25 2>&- )`
This works BUT there is a problem as the mail server may have been accidentally firewalled off. If this happens, my automated checking script will hang. What I want to do is send the escape character so that the '>' prompt comes up. They I should be able to send it "quit" even if it is hung on not getting a response from the server. VAR=`(sleep 5;echo -e '^]';sleep 1;echo quit) | (telnet arhqmg01.usarec.army.mil 25 2>&- )`
The above doesn't work. telnet interprets CTRL+] as '^]' but you can't type '^]' and get the same effect. So I guess what I need is to send the actual keystrokes. Like echo "somenumber" ; echo quit