I would like to make a telnet connection to one server. I can't do this at first beceause i necesary to connect to another server. I use the program putty and this is the command to connect to my first machine:
[Code]....
I'm using something like telnet [URL] 25 and it comes back as not being able to connect to host on port 25. I don't have port 25 blocked anywhere. I turned off the firewall and even opened up port 25 on the hardware firewall router. If I ping it I can connect.
View 2 Replies View RelatedI've a Windows 7 host OS and I've installed Fedora 11 as a Virtual OS using Virtualbox.I want a friend of mine to connect to my Fedora server using telnet from internet. What I would like to know is how do i configure my Virtualbox to allow my friend to connect to my server. Also, is there any setting I need to change in Fedora to allow this?
View 9 Replies View RelatedHow to eneble telnet in linux based os?
I'd tried this command:
telnet my pc ip & name
My system is Ubuntu 11Before I typed "telnet localhost" or "telnet localhost 23". I have make this work below:$sudo apt-get install xinetd$vim /etc/xinetd.conf
defaults{
instances=60
log_type=SYSLOGauthpriv
[code]....
I did followings:
Code:
But got:
Code:
But as I tried:
Code:
It's OK.
I have got three computers at my home[A,B,C] ( all connected to each other), now I connect to B from A using telnet( $telnet ip_B) , but when I try to connect to C using this telnet session( telnet > open ip_C) , I get this error, "already connected to xxx". Is it possible to connect A to B and then use that session to connect to C, so that C finds that the request is being asked by B.
View 7 Replies View RelatedWhy am I not able to telnet to a Windows server machine? Is it because the telnet server is not running there? A remote desktop connection works though.
Does a telnet server run by default on a Unix machine?
i am trying to write a telnet server without username/password function. how to implement such function? the source code from inetutils seems complicated..
View 8 Replies View RelatedHow to communicate with an SMTP server with telnet, in order to send a mail?
telnet smtp.something.somewhere 53 Trying
10.xxx.xxx.xxx...
Connected to smtp.something.somewhere.
Escape character is '^]'.
And that is as far as I got. What do I have to do after?
What do I have to write after "HELO"?
I am using lxterminal to connect to a telnet session on another *nix box.
After I connect, I always have to enter the command
Code:
export TERM=xterm
is there anyway to automate this?
I setup my mail system on a clean install of Postfix and Dovecot from URl...on the:URL... part everything checks out yet when i input the details into Apple Mail it tells me That it Can't connect.I can Connect via Squirrelmail and telnet but not through mail.also my /var/log/mail.log s not recording anything and my mail.log.1 only goes up to april 6
View 2 Replies View RelatedI have a customer who is complaining that they can connect to prt y on IP x with telnet. They are seeing the following:
telnet x.x.x.x y
Trying x.x.x.x...
Connected to x.x.x.x.
Escape character is '^]'.
after some time the connection of course times out. Connection closed by foreign host. There is no telnet service running on this port so they cannot do anything, but they are complaining tht the fact that telnet "connects" is a security risk. I am having difficulty explaining why they are able to connect with telnet. I know it has to do with the socket layer API in Linux but I am having difficulty explaining this sufficiently. I also can't just say "this is the way linux works" to them. I am looking through "UNIX Network Programming" by W.
I am facing an error when I run the following command telnet localhost 7777
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
I want to create script wherein it will check the application if its running. The command that I'll be using to check the application is telnet (if you can recommend others, that's ok). I've an application and it is listening to port 1808. If I do telnet localhost 1808, the response is :
Code:
[root@test ~]# telnet localhost 1808
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
What I want to happen is if the response is like to code above, it will execute a commands. Obviously, above code knows that the application is not working so I need to execute a commands. I created a script before using expect but I don't think it will work because I haven't establish a shell yet unlike successful telnet I could spawn expect.
I did chmod -R g=rwx on /bin , /sbin
now I can not connect to the machine using root through telnet, ssh, scp, rsh or any means.
when i try a telnet to a host like that: telnet 10.10.10.10 1234 i got this: telnet: Unable to connect to remote host: Connection refused.
1/ does this mean that the problem is not due to a firewall, but that the host 10.10.10.10 doesn't listen on the port 1234? other way does this mean that my firewall is authorizing traffic on the port 1234?
and when i try a telnet on another port like that: telnet 10.10.10.10 1235 i get: Trying 10.10.10.10 ...
in this case this
2/ does this mean that the firewall is blocking the traffic between my host and the 10.10.10.10 on the port 1235?
I am running CentOS 5.1 on VMware on Win 7 On CentOS I added Bridged network adapter and the server is connected to internet without any problems, but when I telnet any server on port 25 I get connection timeout.
Code:
telnet f.mx.mail.yahoo.com 25
Trying 98.137.54.237...
telnet: connect to address 98.137.54.237: Connection timed out
telnet: Unable to connect to remote host: Connection timed out
I stopped all servers, iptables and sendmail on the linux server and the firewalls on the win 7 but still getting the same error! I added new network adapter ( host-only ) and tried to telnet the win machine from vmware Linux but I got connection refused
Code:
telnet 192.168.71.1 25
Trying 192.168.71.1...
telnet: connect to address 192.168.71.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
[code]....
When i am trying to telnet to a machine connected in our LAN ..
telnet: Unable to connect to remote host: Connection refused
What's the reason for this? how do i establish a connection? I am using ubuntu 10.04.
I am doing some R&D on 11g RMAN in oracle at home. i have installed oracle enterprise linux and i have installed oracle software. when i am trying to configure listener, it is error-ed out. i have verified that telnet with the port is not working and i am seeing connection refused error.
View 3 Replies View RelatedI am trying to find the difference between the above two services. Both are under xinetd and can someone please explain the difference between them (is one more secure than the other one?)
View 1 Replies View RelatedI've configured postfix on my linux server. For the most part, I got everything working (IMAP, apache, etc) but for some reason, I can't get postfix to work remotely. Postfix works locally to send mail. E.g. when I telnet locally to port 25. However, when I try to telnet from outside, the connection closes almost immediately. I've looked at various configuration options and tuning enhancements but found nothing helpful. Here is my config:
Code:
main.cf:
#See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
[code]....
I just setup a server using Ubuntu 10.04LTS Desktop edition. I am a novice in these things. I was able to setup the SSH server and it works from outside my LAN quite well. I can telnet to it also with 22. I have then setup an email server. I can do telnet to it from the server itself but from the internet it just times out.
I did netstat -nlp and it shows that it is listening to port 25. I have port forwarding for 25 enabled on the router. I cleaned up all the rules of iptables and iptables -L shows everything is accepted.
How to create a telnet server in ubuntu..?My students have unix Lab by next sem and so i would like to create telnet server so that they can access it from windows..
View 3 Replies View RelatedI'm trying to test smtp connectivity to my postfix configuration and I can telnet to port 25 from the computer itself but cannot from the outside. I get a connection refused error message. What am I doing wrong? I believe my dns is setup correctly as it seems the telnet can hit the box so I'm fairly sure its not that.
View 14 Replies View Relatedhow i will write my own telnet server instead of existing one.please give me the path for telnet.c file in the linux kernel
View 9 Replies View RelatedI am able to telnet localhost 143 and telnet ip 143 on localhost.but from outside network am not able to telnet ip 143.
View 2 Replies View Relatedjust now i installed telnet on my VPS. but while connecting to other server it gives error
# telnet 10.10.10.224 Trying 10.10.10.224... Connected to 10.10.10.224 (10.10.10.224). Escape character is '^]'. Connection closed by foreign host.
I have a question about telnet.Is there any way to configure a telnet server without disable firewall.I am using redhat 5.2 and fedora 12.I have lack of knowledge about firewall.
View 1 Replies View RelatedIs it possible to restrict telnet connection from remote to my server(linux -centos5)?
=================
Ex : [root@localhost]# telnet 10.0.0.33 80
Trying 10.0.0.33...
[code]...