I just installed ubuntu 9.1 on an inspiron 4000. The screen looks like like its been split and I can't see the options to try to change display options. I can't post pictures here but if you have a way for me to, I have some pictures too.
View 2 RepliesI just installed ubuntu 9.1 on an inspiron 4000. The screen looks like like its been split and I can't see the options to try to change display options. I have uploaded a picture from my phone. It kinda sucks but it's there. I have tried "sudo dpkg-reconfigure xserver-xorg". this gives me nothing but an empty prompt. I have also tried "sudo nano /etc/X11/xorg.conf". this gives me box where I can type but enter doesn't make it submit, just moves down a line and there is no information there like it seems there should be. I got to the display preferences and it says the monitor is unknown. changing the display resolution does not fix it. FIXED by going here: [URL]...
View 1 Replies View RelatedI have man properly installed on my boxes (I have ubuntu and debian, I would also be interested in how to do this for fedora) however only section 1 of the man pages is available. How do I install additionally sections? I am particularly in need of sections 2 and 3. command line instructions needed. I don't have a desktop environment on all my boxes.
View 1 Replies View RelatedToday I assembled a machine and installed Ubuntu 8.4...I think. When I opened Open office, more specifically the drawing section, the toolbars were full of a script font and I am not sure of how to change it to something I can read.
View 4 Replies View RelatedI have tried to boot Ubantu 10.04 several times and every time the screen is unreadable, the desktop is broken up into about 5 vertical sections and that's as far as I can get. Help. I have a HP Pavilion dv6000 laptop. other versions of Ubantu work okay.
View 1 Replies View RelatedI have been using Ubuntu for a week and getting on well with it. After reading reviews I decided to try Kubuntu. I installed it from the terminal and all seemed to go well. Now when I start the computer and select ubuntu it goes to a log in screen. I type in my user name and password and all I get is a terminal screen in the top left. If I close this I go through a 'broken screen' and back to the sign in.
View 1 Replies View Related1. Is there a way to change the broken glass/monitor background on the login screen???
2. I have tried to login as root, but it will not accept the password, but if I login with my user name and need to change things that require root privileges the password works fine.
I worked a little back in 05 and 06 with FC4 and FC5 but nothing until now..
This is my file, named xxx.c. And there are two functions in it.
[code]...
When I try to compile the whole project, I used -ffunction-sections,-fdata-sections to generate the .o files, use Wl,--gc-sections -Wl,--print-gc-sections to link to the exacutable file. gcc 4.3.2 ld 2.18 Debian 5 After the first time I compiled it, I got a list of Removed functions. But one second later, I rememberd that I forget to close the Compile Switch: Debug. Then I had to recompile it and got another list. Compare these two lists, I found that , bxx isn't on the second list. First I guess that bxx is a debug function but never used in debug mode, and it won't be compiled in release mode. I check the source and find that there was no compile switch for bxx. But it's caller function axx, is removed, both the debug switch is on and off. I try to compiled the project for several times , but the result is the same. I can't realized it , why? Is that the --gc-sections won't remove all the functions not used?
how to use absolute sections in gnu assembler?
View 2 Replies View RelatedI am not clear with certain sections of apache I saw a default virtual host file. as follows
[code]...
What does Directory / here represents is it same as document root or different. The following section where /var/www is included in Directory Index
[code]...
I am not clear as why by default ScriptAlias is present in the default vhost is it necessary to keep in other Virtual Hosts. Similarly /doc/ what is this referring to in following section
[code]...
I've checked and double checked that there is no user and password directive in /etc/my.cnf and ~/.my.cnf but it seems that every time I issue mysql it will drop me into the command line without prompting for a password or giving any pause. Of course, the only table I have access to when doing this is information_schema with read only on most of it and no access on the rest, but I was just wondering where else an auto-login style authentication could be coming from.
View 11 Replies View Relatedhow to make a site like this one, LinuxQuestions itself - it puts a thin line around each post, to demarcate it - for the website I'm building, I need exactly this functionality. Do I have to use the "gd" library?
View 5 Replies View RelatedAs a curious side project I'm playing with mzXML data(an xml format for holding mass spec data). A typical scan can be quite large, even up into GB size. I'm wondering how would one go about parsing an xml file in sections, one section at a time. The idea being if the computer doesn't have enough memory to load up the entire data file, work on chunks of it at a time.
View 3 Replies View RelatedI have a system setup script for my Slackware installations that pulls all packages and source files from another machine and sets everything up to be identical between machines. The script works as expected but make it entirely unattended. How do I make the bash script deal with automatically selecting "Yes" for, for example "Install x(Yes/No): " when prompted by a make file?
View 3 Replies View RelatedUsing Karma and kubuntu -single boot. When I restarted my machine, the login appeared as usual and I entered my usual password but it was not accepted . I tried several times including making sure that caps lock / num lock etc were not invoked.
I then rebooted into recovery mode and let it run its course. When I rebooted and input my login password, I can get a bit further. The login is accepted but the GUI opens with a blank wallpaper and the terminal prompt window open at the keevill@keevill-desktop.
The ls command shows the name of the files which are on the desktop but they are not visible on the GUI nor are any other icons for applications. It seems like the kubuntu GUI is broken or something. I tried uninstall and then re-install but just the same. If I am forced to re-install Ubuntu I guess this means I lose all my settings and applications will have to be all installed again ?? How can I avoid this?
I have just insall Jessie but I have a blue screen debian with three logos in the midle: harddrive, tools, browser, but no link no menu, only the console.
I have install KDE
my graphique card is
VGA compatible controller: NVIDIA Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1)
So, a friend's computer, running 8.04, refused to boot for a while, so I took a look at it. It appeared to boot fine, but when I got to the login screen, it crashed when I started typing. I did a hard power-off, booted it up again, and tried to update the packages (it has been disused for a few months, and I suspected that the problems had been fixed). Synaptic told me that I would have to uninstall a bunch of packages in addition to updating, which was all fine and good, but then it crashed at the end of it's purge, and left me wondering if the system would be stable afterwards. The update manager told me that I had broken packages, but then went on updating a few of them. When I went back to synaptic, it disagreed, showing no broken packages. I tried to open Firefox, but then GNOME crashed. How do I do a mass reinstall of all of the packages, and do I do this before or after I update the packages?
View 1 Replies View RelatedSee attached photo. Is my screen broken or what?
View 5 Replies View RelatedSo I'm pretty awful at keeping Debian up to date, I guess. I'm using cron-apt to fetch updates every night, then apply them whenever I get around to it. Well, I neglected that last part for a month or two, and after some routine downtime to clear the case of dust, I decided it was time to upgrade. So I ran the command, everything checked out fine, and I was on my merry way. Until a half-hour ago when I accidentally shutdown the computer (I use the same zsh prompt on each computer, so I got them confused.) I turned it back on, only to be greeted with a black screen after all the services started up.
Everything works: ircd, MPD, etc. EXCEPT, of course, X. At first I thought the update broke SLIM, but after checking htop and doing a killall slim, it doesn't appear to be running (the screen remains black.) I hit Control-Alt-f2 to get to get back to a terminal, then tried doing startx, which freezes the computer entirely. All the network services stop, I can't SSH in, etc. It's dead. If I'm not mistaken, Xorg.0.log should say something, but I'm not a huge expert on it. The last line isn't an error, I can tell you that. So what's the deal here? apt-get remove xorg and start over?
PC specs: i7 920, Ati HD5870, 4GB ram Installing Ubuntu 10.04 from a USB stick. The stick is fine as I installed Ubuntu on my laptop with it no problem.
Problem #1: The grub boot manager is missing. The first time I installed Ubuntu it appeared as usual and let me choose between windows 7 and ubuntu. Due to the black screen issues I uninstalled Ubuntu. Since then, every time I've tried reinstalling it I don't get the grub boot manager, instead my PC goes straight to windows. I have formatted the partition I installed Ubuntu on, as well as installing it on another drive, to no effect.
Problem #2: After the Ubuntu splash screen, I'm greeted by a black screen. After a few seconds my monitor goes into standby. Ctrl+alt+f1 does nothing, and removing quiet and splash from the command line didn't help either. I hear I need to use vesa drivers but I have no idea how to go about this when I can't even get the OS to start in the first place.
However, I've been trying to get a splash screen up, and it doesn't work.This is the splash screen I want to use: http://gnome-look.org/content/show.p...?content=79783
I've tried to install Usplash, but the package was broken.I tried to install it via Softpedia, but it was missing the artwork .so.I've also tried to install SplashY, but it is also a broken package! How can I install this splash screen?
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
i'm running debian lenny - latest stable i have recently installed smartcam (mobile phone as webcam over bluetooth) from .deb package , get errors of unmet dependency , but application works like a charm, unfortunately broken dependences block my aptitude , i cant fix them either as latest stable use older versions of dependences even in backports... how do i mark smartcam package as not broken and release my apt?
View 8 Replies View RelatedPreparing to replace mysql-server-5.1 5.1.41-3ubuntu12.1 (using .../mysql-server-5.1_5.1.41-3ubuntu12.3_amd64.deb).It hangs until i reboot the thing. This is not a normal error.I'm trying to fix it for at least 10 days.No Success.It happens when i try any package operation.
View 2 Replies View RelatedI did the system updates and one package was listed - yum-3.2.28.3 so I installed it Friday. Since then I can't install new packages. The gui package manager errors out. yum also errors out. I have a desktop with yum-3.2.27 and it installs the same packages with no problems.
[Code]...
I have a number of problems with Exaile. In my old windows days, I would try to fix a broken application by uninstalling and reinstalling it. Is that the best way to fix a Linux application that stops working?
I am running Ubuntu 10.04 on a HP Pavillion laptop. Exaile worked fine for a while, but then stopped downloading the Shoutcast station listings.
I should know how to do this, but. Using Ubuntu Jaunty. I have tried using dpkg --purge no joy
Code:
I am running centos 4.5 Kernel. 2.6.18
My ifconfig is broken. and i dont know how to fix it.
I go into /sbin and i see the file but when i try and execute the command is says bash: ifconfig: command not found.
The permissions on the file are as follows:
I've been trying to fix this problem for quite a few days now and have done a lot of searching on these forums, Linux Mint Forums and some others Google lead me to and have has some success, but am now stuck.I have posted a thread on this same topic on the Linux Mint Forums, but have had no success (if you want check it out at:URL...Originally I received error messages when trying to update involving certain repositories which couldn't be accessed (because they either didn't exist or had been moved) and I hunted these down and changed or removed them.
I have done much searching, etc. and cannot find any broken packages. I have tried many many different commands which have mostly done nothing.I seem to be in a similar boat to this person: URL...
I was having a problem with a fresh 11.04 install and the VPN software I use for work. I found the fix was to upgrade the software, so I downloaded an RPM, converted it to .deb and installed it via dpkg. The install worked and the VPN software now works, but Package Manager says I have a broken package and wants to 'upgrade' to the older broken one. How can I fix this without breaking my VPN SW again?
View 1 Replies View Related