I have man properly installed on my boxes (I have ubuntu and debian, I would also be interested in how to do this for fedora) however only section 1 of the man pages is available. How do I install additionally sections? I am particularly in need of sections 2 and 3. command line instructions needed. I don't have a desktop environment on all my boxes.
View 1 RepliesThis is my file, named xxx.c. And there are two functions in it.
[code]...
When I try to compile the whole project, I used -ffunction-sections,-fdata-sections to generate the .o files, use Wl,--gc-sections -Wl,--print-gc-sections to link to the exacutable file. gcc 4.3.2 ld 2.18 Debian 5 After the first time I compiled it, I got a list of Removed functions. But one second later, I rememberd that I forget to close the Compile Switch: Debug. Then I had to recompile it and got another list. Compare these two lists, I found that , bxx isn't on the second list. First I guess that bxx is a debug function but never used in debug mode, and it won't be compiled in release mode. I check the source and find that there was no compile switch for bxx. But it's caller function axx, is removed, both the debug switch is on and off. I try to compiled the project for several times , but the result is the same. I can't realized it , why? Is that the --gc-sections won't remove all the functions not used?
I just installed ubuntu 9.1 on an inspiron 4000. The screen looks like like its been split and I can't see the options to try to change display options. I have uploaded a picture from my phone. It kinda sucks but it's there. I have tried "sudo dpkg-reconfigure xserver-xorg". this gives me nothing but an empty prompt. I have also tried "sudo nano /etc/X11/xorg.conf". this gives me box where I can type but enter doesn't make it submit, just moves down a line and there is no information there like it seems there should be. I got to the display preferences and it says the monitor is unknown. changing the display resolution does not fix it. FIXED by going here: [URL]...
View 1 Replies View RelatedI just installed ubuntu 9.1 on an inspiron 4000. The screen looks like like its been split and I can't see the options to try to change display options. I can't post pictures here but if you have a way for me to, I have some pictures too.
View 2 Replies View Relatedhow to use absolute sections in gnu assembler?
View 2 Replies View RelatedI am not clear with certain sections of apache I saw a default virtual host file. as follows
[code]...
What does Directory / here represents is it same as document root or different. The following section where /var/www is included in Directory Index
[code]...
I am not clear as why by default ScriptAlias is present in the default vhost is it necessary to keep in other Virtual Hosts. Similarly /doc/ what is this referring to in following section
[code]...
I've checked and double checked that there is no user and password directive in /etc/my.cnf and ~/.my.cnf but it seems that every time I issue mysql it will drop me into the command line without prompting for a password or giving any pause. Of course, the only table I have access to when doing this is information_schema with read only on most of it and no access on the rest, but I was just wondering where else an auto-login style authentication could be coming from.
View 11 Replies View Relatedhow to make a site like this one, LinuxQuestions itself - it puts a thin line around each post, to demarcate it - for the website I'm building, I need exactly this functionality. Do I have to use the "gd" library?
View 5 Replies View RelatedAs a curious side project I'm playing with mzXML data(an xml format for holding mass spec data). A typical scan can be quite large, even up into GB size. I'm wondering how would one go about parsing an xml file in sections, one section at a time. The idea being if the computer doesn't have enough memory to load up the entire data file, work on chunks of it at a time.
View 3 Replies View RelatedToday I assembled a machine and installed Ubuntu 8.4...I think. When I opened Open office, more specifically the drawing section, the toolbars were full of a script font and I am not sure of how to change it to something I can read.
View 4 Replies View RelatedI have a system setup script for my Slackware installations that pulls all packages and source files from another machine and sets everything up to be identical between machines. The script works as expected but make it entirely unattended. How do I make the bash script deal with automatically selecting "Yes" for, for example "Install x(Yes/No): " when prompted by a make file?
View 3 Replies View RelatedI have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies View Relatedyum install libstdc++-docs doesn't work for me:No package libstdc++-docs available.So, I can only install it myself.I've found the C++ man pages here, how can I install it?I guess just put it under /usr/share/man/man3 will do the job, but I'm not sure.
View 1 Replies View RelatedRecently got a VPS and installed Ubuntu Server 9 (32bit) When i go to install basic pages like php my admin with commands like..sudo apt-get install phpmyadmin I get a error like this:
root@PkNGssbkpT:/# sudo apt-get install phpmyadmin Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
[Code]...
Just done a yum update and emacs's fonts seem very strange. Additionally all "" characters are displayed as a bizarre horizontally barred "W". Edit: I think it's nothing to do with emacs but with the fonts update. The default fonts are now "Baemuk Gulin", by changing them (SHIFT-LEFT_MOUSE) to, eg, Arial I can display things correctly. But I think the times fonts are now missing. Very strange.
View 14 Replies View RelatedFor some reason Firefox loads pages really slow on my 11.3 install. Chrome everything loads fast. I am running the latest of firefox.I have done the usual tweaks to the about:config that I found on the internet. Is there a reason for this and can I fix it?
View 8 Replies View RelatedI'm very new to Linux, and I have ran a Windows XP server before, with a Apache2 Server software for Windows. and didn't have any problems with it, but I really want to set this server up with Linux.
The server is running, but the only thing that comes up in the browser, is the html pages, the pages call all the images from a folder /images/ but for some reason I can't get it to pull the folder up. None of the graphics show on any of the pages.
I also have a VirtualHost setup, and have another website set up in the DocumentRoot with the 2nd site, but it won't come up ether, even tho it is listed as the 2nd VirtualHost, and have that folder set up as the DocumentRoot.
I'm just using IP Addresses for now till I get this all sorted out.So if I enter the IP the main page comes up, just no graphics. if I enter the IP Address/2ndSiteFolder/ I get a directory listing with the 2nd site folder listed, so now if I click on the 2ndSiteFolderName, it comes up as IP/2ndSiteFolder/2ndSiteFolder/ Now the 2nd site comes up, and so does all the Graphics for that site, even if I go to some of the other subfolders site. So its just weird. I don't know what I need to do to get this to work right.
I know it has to do with setting up the folders for VirtualHost, I just don't know what it is. I have been working on this for a week, and I'm not getting anywhere..
I try to install the java plugin but the java test pages show not installed. I have tried the openjdk-6-jdk package and the Oracle/Sun 1.6.0_26 version to no avail.
Is there some good instructions page someplace? I have yet to find a set of instructions that provides something clear that works.
I installed apache2 with 'zypper in apache2 apache2-doc' and there's no man pages,
tried
man apache2
man apache
man httpd
I tried to make that as short and descriptive as I could. There are certain web pages that I try to visit on my Linux computer that either respond after more than a minute of waiting for a response or, more often than not, simply do not respond at all - leaving the browser "waiting for xxxxx". Yet when I try those same pages on my GF's Windows computer, connected to the same router/DSL connection, the pages load quickly and without problems. Both systems are running Firefox.. One of the pages, for reference, [URL]..
View 5 Replies View RelatedI've just installed Ubuntu 9.1 amd64 and I have a problem with acces to some web pages (i.e amd.com, adobe.com). I looks like bowser load a page but then stopping it last infinitely. I have Ubuntu 9.1 x64Atheros wireless adapter connected to ZyXEL access point.Parallel Windows machine which connected to te same router has no prblem with access to those sites. I tried different browsers, different setting of DNSeven set up different versions of 9.1 (x64, x86)
View 2 Replies View Relatedafter wrestling with several problems over the past few days of switching over to a portable version of Linux 9.10 (I'm running a Live USB created using Lili USB), and deciding between the UNR or the Desktop i386 releases (I eventually went with UNR because i386 will not load on my netbook and ends up corrupting itself), I now find myself with the interesting problem that Firefox will no longer load webpages.I'm using a wireless connection, and it worked about 4 hours ago, but doesn't any longer. It registers that it is connected (The network icon displays the connected information), but the webpages themselves will not load (And I don't know if any other web based application functions- I only bothered to check firefox).
And I know the connection itself is not to blame because I'm using it right now to post this message (Off of Windows 7).Any help that can be given would be appreciated. Except for these problems that come up I'm loving Ubuntu, and intend to use it inbetween classes and such.EDIT:No internet applications work, and the router does assign me an IP address while in Ubuntu. Also, the speed of the "Server not found" message indicates that it's not even trying to connect.
If I surf the net and reads webpages everything works great.But if I forxample try to write a comment in Facebook, I have to minimize Firefox, then maximize. Writing works fine
View 4 Replies View RelatedAt the moment I regularly use Image Magick convert command to convert PDF's to images which is great but I would like to only convert some of the pages in the PDF instead of them all. Im sure the function must be available I just haven't been able to find it even after bashing google for a few days.
Code:
convert *full.pdf test%d.jpg
this is the command I use at the moment.
I like to read help files offline, but downloading one page at a time is extremely tedious. I never see a "download all pages" option.
View 2 Replies View RelatedI am a web developer and fonts are crucial to my job.All i want is firefox to render the fonts just like if im on a windows machine, is this possible?For example i install tahoma and microsoft core fonts but in the FF they're not appearing right. This is a straggle to my work and believe me, i 've searched the entrire internet for a solution!
View 8 Replies View RelatedDoes anyone know of any man pages that would provide me information on commands in shell scripting like while or case? I have a test tomorrow where we have to write shell scripts and we're allowed to use the man pages, but not allowed to look at previous scripts. I don't feel like memorizing a bunch of commands if I don't have to.
View 5 Replies View RelatedI tried to use abiword and when I pasted it, all the html and css code was gone. Is this for continutiy between posts or is it for security; the web page does not want individuals to be able to hack the site
View 9 Replies View RelatedI wanted to know how to search man-pages. For example, i wanted to check BIND FUNCTION FOR SOCKET. When i type man bind, a page about bash related information is displayed. I have realised i should be searching for bind(2). but man bind(2) gives gives syntax error. i am using Fedora 12.
View 7 Replies View Related