General :: Re-use An Anacanda.ks File To Load Another Server?

Jun 11, 2010

I just loaded one server, and want to load another server in the same exact way, just with a different name and IP. Can I somehow use the anacanda.ks from the old server if i change the IP and name in that file?

View 4 Replies


ADVERTISEMENT

General :: Load The Local .csv File Into Mysql Server The Date Format Varies?

May 25, 2010

When i load the local .csv file into mysql server the date format varies.Its mis matching.How to solve and match this.

View 1 Replies View Related

Ubuntu Installation :: How To Load Kickstart Config File - Refuses To Load File / Launches Generic Install

May 6, 2010

I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.

View 1 Replies View Related

General :: Unable To Load A Kickstart File

Nov 8, 2010

I m facing a problem from few days i try to sort it out but i fail to overcome from this problem .

i configure a pxe boot server and mount the RHEL iso to /bootins/tree directory

Then after i created a /kick/client.cfg kickstart file. and share both the directory /bootins/tree and /kick with nfs

below is the entry of my /etc/exports directory

/bootins/tree 192.168.10.0/24(rw,sync)
/kick 192.168.10.0/24(rw,sync)

my client machine can successfully boot from the server but after booting an error msg is come, the msg is unable to load a kickstart file , i dont know why this happens coz i can successfully mount both the above share from another linux machine but dont know why at booting time this msg is appears firewall is off

View 1 Replies View Related

General :: File System Loads / Load The Partition?

Aug 27, 2010

my data resides in a partition sda2 - in a logical volume lv_root.unless I'm wrong lv_root contains the information on how to load the partition.so superficially it seems the partition must be loaded bofore we get the info on how to load it.

View 20 Replies View Related

CentOS 5 :: Create New RAM Image File To Get Server Load Raid1 Module Upon Start - Mkinited Error No Kernel Available For 'inited-2.6.18-128.el5"

Nov 12, 2009

I'm trying to create new RAM image file to get my server load raid1 module upon start, I was following redhat documentation & it suggested to use the following command mkinited --with=raid1 inited-raid1-$(uname -r).img $(uname -r) However after running this command I'm getting this message No Kernel available for 'inited-2.6.18-128.el5"

View 4 Replies View Related

General :: Start X Server And App At Boot (or Services Load) Time

Oct 14, 2009

I need to start an application (graphical) when the PC start, even before anybody login, and use/launch a specific user. Now only can do this manually; when gdm starts, switch to any text tty [ie. Ctrl + Alt + F1], then I login into the special user, start a X server, export the DISPLAY environment variable, and start the application.

With this steps:
Code:
$X :1 -verbose -nr -nolisten tcp &
# Maybe Metacity -> $ metacity
$export DISPLAY=:1
$JavaApp &
Now i need put this steps (script) in some place to launch the app automatically, and with and specific user [ie. manager].

How can I made it? Maybe in init.d? or an special xinitrc? And how can start the app with the specific user? And, if is possible, who can stop the app when the system going turn off? I have Debian 5.0 and a beginner knowledge of shell script.

View 5 Replies View Related

General :: Tools Or Script To Monitor Load Average On Server

Oct 27, 2009

We have a server that is running RHEL4 that occasionally spikes in load average above 10 and we have no idea what is causing it. We would like to know if there are any free tools or a script that when the load average hits a certain point it will trigger the system to start logging the processes to see what is happening. Usually by the time we get logged into the system the load average is on its way down. If someone has a better idea please let me know.

View 4 Replies View Related

General :: Configure Load Balancer To Create A 4 Server Web Farm

Feb 8, 2011

How to configure load balancer to create a 4 server web farm.

View 1 Replies View Related

General :: Will Zombie Process Leads To Server Load Unstable

Jun 14, 2010

There are around 173 zombie process on my client's server, my question is whether zombie process on the server will make server's load unstable like it goes to 20-26 suddenly and comes down and goes high suddenly,will zombie process consume system's resource?..

View 8 Replies View Related

Ubuntu :: GDM Broken - Gdm-binary[230]: WARNING: Unable To Load File '/etc/gdm/custom.conf'. No Such File Or Directory

Sep 1, 2011

I've had Ubuntu 11.04 installed on my desktop since it's release. Up until an hour ago, it was working fine. I clicked on an update from the update manager, now booting into a graphical mode is completely broken, (the start-up load hangs at 'Check Battery State ... [0k]'). I restarted my computer, and booted into safe mode, and launched the terminal. This all works fine. I then typed :

Code: sudo gdm start into the command prompt, hoping that I would be able to start things manually. Instead, it spat out this: Code:

gdm-binary[230]: WARNING: Unable to load file '/etc/gdm/custom.conf'. No such file or directory.
gdm-binary[230]: WARNING: Unable to find users : no seat-id found.
gdm-binary[230]: WARNING: Gdm Display: display lasted 0.070467 seconds

The last line was printed about 8 times, with slightly different times, before it gave up and failed. Some information which might help, I have Gnome 2, Unity and KDE (not sure which version), installed. My graphics card is the GTX 275, and I have driver the Nvidia driver 275.21. So yeah, I think the update has gone and moved custom.conf somewhere, but I have no idea on how to fix it. I have a graphics programming assignment due on Friday and I would be eternally grateful if I could get this fixed well before then.

View 2 Replies View Related

General :: Error "can Not Load Or Share Libpgplot5.so There Is Not Such File Or Directory"

Feb 22, 2010

I have insttaled pglpot5.2 but when i want to run a file with this programm it gaves me this error

"can not load or share libpgplot5.so there is not such file or directory"

although i have this library in my lib directory what should i do ?

View 5 Replies View Related

General :: FATAL: Could Not Load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No Such File Or Directory

Mar 6, 2011

I want set up VPN on my VPS but when i try to turn on tun/tap i see:

:/lib/modules# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory
os : debian 5
(folder lib/modules is empty)

View 1 Replies View Related

General :: Parse File From Remote Server To Caculate Count Of String Existence In That File?

Aug 30, 2010

I need to parse the file of same name which exist on different servers and calculate the count of string existed in both files.Say a file abc.log exist on 2 servers.I want to search for string "test" on both files and calculate the total count of search string's existence.For example if file abc.log on server 1 has string "test" 2 times
and file abc.log on server 2 has string "test" 4 times.then the output will beStringName : Countexampletest : 6 timesNote : I have created the password less connectivity using ssh-keygen.

View 2 Replies View Related

General :: Mount The File Server Share On Application Server And Execute

Jan 8, 2010

i have purchased sun server for my visualization project. Request you to help me finding the io for disk .I have put storage(disks) on different location (File Server) and on server (Application) i have configured 4 virtual machines.

How would i monitor the io for file server from the Application server where i have configured 4 virtual machine. one way to mount the file server share on application server and execute

dd if=/dev/zero of=/share/test.out bs=1024 count=1024 to check the read and write Is there any other way of doing this.

View 1 Replies View Related

CentOS 5 Server :: Improve Server Speed On Servers With Heavy Load?

May 4, 2009

There is a tool appeared in repository called ktune; The purpose is to adjust some sysctl.conf settings to improve server speed on servers with heavy load. What is this tool for if one can achieve the same with the configuration file added to system startup? Or ktune is just such file?

View 1 Replies View Related

General :: Application On Server To Allow Network Boot Of Windows Pc's Force Boot Img Load

Apr 6, 2011

A colleague of mine was studying at the University of Vienna and saw an application which was based on linux whereby other pc's booted from it and if on the server they had set it to force a clean install on that PC it would download and install a windows image. Does anyone know of the app or could point me in the direction of a similar app.

View 5 Replies View Related

Ubuntu :: "Can't Load Image From File '/usr/share/firefox/icons/mozicon128.png': File Does Not Exist."

Apr 12, 2010

Tried running simdock from software center...uninstalled because I was getting this error after trying to run ap "Can't load image from file '/usr/share/firefox/icons/mozicon128.png': file does not exist."

View 3 Replies View Related

Server :: Unable To Load Redhat 9 Server After Disk Recovered?

Mar 13, 2011

I got this type of messages:k journald starting. commit interval 5 seconds.EXT3.fs:mounted file system with ordered data modefreeing unused kernel memory : 212 k freed.Warning:unable to open an initial consoleAfter this Server is not hang state but stay at same Anybody can help me how to resloved this type of issue.

View 1 Replies View Related

General :: Can Move Windows File Server To Server

Oct 21, 2010

we have moved to linux platforms now. can i move my windows file server to linux server,main work on this windows server is sharing folders which having secure permissions to respective groups & users.i knew we can share folder on linux. before formatting my windows server i want to know can we create new users to access particular folder?. users will not have any other kind of access except accessing there data folder. currently we have below scenario :users named a,b,c,d & e. all users having their folders to access. a & c are in the same group & they have common access to other common folder. please help me to change my server in ubuntu, i have planned to migrate in ubuntu server 10.04 (64 bit).

View 5 Replies View Related

Server :: Abrupt Increase In Server Load Upto 300?

Sep 19, 2010

I run a server with nginx at the front and apache at the background. Nginx serves as a reverse proxy in here. As there were lots of DOS attacks, I have implemented Deflate-DDOS, APF and Nginx anti-ddos features and the server runs without a problem. Once every month, the load on server increases upto 300 and I receive an email like this :

Subject : Cron <root@server> [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm

Content :

find: `/var/lib/php5/sess_0ca40520ac8ecb66090746f90da17516': No such file or directory
find: `/var/lib/php5/sess_3839b0cbf042934183d56ff682c948e0': No such file or directory
find: `/var/lib/php5/sess_dec1ed8ea1f62caf7a42a29b9f82c506': No such file or directory

[code]....

There's more that 100,000 ( I suppose ) lines on this email. I have no idea what the problem is. It seems there's something with the session, but I really don't know what it is.

View 1 Replies View Related

General :: Failed To Load "canberra-gtk-module": Libcanberra-gtk-module No Such File Or Directory

Mar 25, 2011

i installed firefox 4 and removed the old 3.X version. did a general update that my computer showed me was available then i noticed the first problem. firefox 4 would not launch when i clicked it, it would only launch when i clicked the gnome 3 applications button and then clicked and dragged the firefox logo to the desktop, then it opened. the second problem i am now having which at the moment is more bothersome is that after i closed the lid to my laptop and opened it up again after a while and logged back in and noticed that the ENTIRE gnome 3 environment was gone. no panel no menu nothing just the desktop and a few desktop icons. i tried the command "yum install gnome-shell" but it just sed that gnome 2.31.5-7 .fc14.i686 was already installed so it wasnt gonna do anything, then i tried the "gnome-shell --replace" command and it just said

failed to load "canberra-gtk-module": libcanberra-gtk-module no such file or directory.

View 5 Replies View Related

Ubuntu :: How To Load .isz File

Aug 20, 2010

As we known, .isz file is compressed by UltraISO.

how to load it under ubuntu?

Are there any applications for it?

View 2 Replies View Related

Slackware :: Gxine Says There Is No File To Load?

May 8, 2011

Just curious if anybody can watch this site with slackware/gxine or other program? [URL]

gxine says there is no file to load.

I'm using slackware 13.1 and xfce.

View 6 Replies View Related

OpenSUSE Install :: Cannot Load File Linux-atm-lib-2.5.0-142.1

Jul 19, 2011

My problems connecting to DSL are caused by not having the linux-atm-lib file.
After downloading the file and trying to run it, the error message is: Could not find RPM package in pool.

Where is the RPM package?

This is a new install. So far everything seems to work except DSL connection.

View 4 Replies View Related

Ubuntu Installation :: Cannot Find Boot File / Won't Load Anything

Aug 21, 2010

My internal hard drive developed a problem (probably from a fall) and needs to be replaced. In the meantime I've decided to use my external hard drive to hold a version of Linux (ubuntu 10.04) until I am able to replace the internal hard drive. For some reason I am unable to get the external drive to accept the recovery disks I have for Windows 7.

What I'm having issues with is that after installing the Ubuntu OS on to the external, I reboot the PC and it tells me it cannot find a boot file, and won't load anything. I have to run the live cd version of the OS to get anything to work right.

View 9 Replies View Related

Software :: Cannot Load VLC Media Player - File Not Compatible

Feb 10, 2010

I have tried to download vlc media player but the file type is a .exe file which is a windows file, and that wont run or even open on the linux system. How to find a compatable vlc for linux!

View 3 Replies View Related

Server :: Oracle Server Load Avg

May 8, 2011

I am not an oracle DBA, but need to find the cause of high load avg, even after adding more CPU power the load avg is the same.

Old and new servers load avg is the same (between 6-10 peak hours and 3 to 5 during off-peak hours) no difference. I expected the laod to come down as we added more CPUs.Our DBA says queries are optimise.Can some Oracle DBA give some tips to find the cause.

View 11 Replies View Related

Server :: Run A Script If The Server Load Is Above A Certain Value?

Jan 3, 2011

I want to setup a cron job to run a bash script which which calculates the server load and if the load is above certain value(say 15) then stores highest cpu eating users list in to a file for that instant. I have a small script which lists users according to cpu usage.. But i dont know how to check the server load and if and only if its above 15.

View 12 Replies View Related

Server :: Web Server Can't Load Mcrypt?

Jul 16, 2010

I have a CentOS 5 server running Apache & PHP. When I load 'Phpmyadmin' on the server it worked fine however there is a message at the bottom of the screen that says:Quote:Cannot load mcrypt extension. Please check your PHP configuration.I checked to make sure that the 'mcrypt' package is installed on the server:

Code:
[root@ideweb1 ~]# rpm -qa | grep -i mcrypt
php-mcrypt-5.1.6-15.el5.centos.1

[code]...

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved