Using Linux and have an IPAQ that would like to get TomTom Navigator 5 running on. I've loaded TTN 5 exe on the IPAQ, but have not been able to get the maps loaded. The CD has the files listed as .CAB files, and I have used "cabextract" to extract those files to a directory in Linux. When I use the "file" command, I get that the extracted files are "Microsoft WinCE install header, architecture independent, 10 files, 1 registry file". Do not need TTN5 running on the PC, just want it on the IPAQ. The maps will be on an SD card as is the TTN5 exe. Still get "no maps found" error from TT5 on IPAQ with all the files extracted from one region map put onto the SD card.
Does anyone know how to get the autofs to use NIS maps to create mount points for NFS mounts? I see no reason to create a local /etc/auto.home just to add the line +auto.home. I am using CentOS 5.5.
What's really irking me is that I have 2 machines that work and others (freshly built) that don't and I haven't found the difference (yet)!
I am having what I think is a slightly weird problem with the way some of my keys on my keyboard are mapped. When I try entering the "backslash" keys i get < and for the pipe key i get >. I have tried going through the keyboard layouts and trying other combinations but to no avail
System info ASUS G51VX Keyboard: Standard Ubuntu 10.04 LTS the Lucid Lynx - released in April 2010 and supported until April 2013.
Before I could not even get to identify the Ipaq on the usb port.
Now, after blacklisting ipaq I got this:
Quote:
But still can't see it on the computer nor in media folder, what goes next? I also installed activesync trhough wine, but still no success on actively detecting the device.
So my old Compaq Ipaq boots right in to the LiveCD just fine but Gnome doesn't start? Current system specs are in my signature. I'm running the Ubuntu 10.10 i386 desktop disk. I'm new to physically running Ubuntu (ran and do run a lot of VM's and very happy with it).
I'm planning a trip and google maps/bing maps/mapquest seem to not like to have too many points on the itinerary. Is there a good similar program that I can run locally?
How do you find out which USB device in lsusb maps to what /dev entry? How do you find out which /dev entry maps to what /device entry? What about drives with multiple partitions?
I seem to be able to install / configure Postfix server in 10 minutes as an MTA for a single domain but my struggle is really understanding the maps / restrictions which even after reading "The Book of Postfix" is not very clear to me:
[Code]....
My question is between those commonly used three maps above, what are the difference between them and how do I know when to use one over the other? Can someone clearly explain them to me? Here's what I have in my 'main.cf' but honestly I couldn't tell you if they're correct or now:
I've been a Debian convert for several years now, and generally use the Iceweasel browser (currently 31.7.0) supplied in the Debian repo. I've noticed that since Google Maps added 3-D effects to its Street View interface, and changed things up a bit, that it siezes Iceweasel. You can't "drive" the streets without the screen hanging. I'm running Debian 8 AMD64, and the free Noveau drivers for a Radeon 7570 video chipset. And I duplicated the problem on another PC with an onboard Intel video chipset.
Here's what I attempting in debugging things:
1. Installed the latest Adobe flash (not sure this was necessary). 2. Tried using the non-free ATI drivers, but ran into issues and removed those. 3. Tried tinkering with about:config webgl settings -- but there's a number of those, and I didn't know the minimal number to tweak, so I reverted back to defaults. 4. And unless I'm simply missing something, the "Lite View" option for Google Maps seems to have recently disappeared.
So Google Maps Street View still wasn't working. Then I stumbled across some references to using "force=webgl" as an URL parm in Google Maps: [URL] ....
Out of curiosity then, thinking the issue is not at my end at all, I downloaded the User Agent Switcher for Iceweasel and changed my agent's response to the latest Firefox on Windows 8.1. Reloaded the Google Maps Street View, and bingo -- it works great. Google doesn't like Iceweasel because of that name in the user agent?
This is a klunky method of using Street View, and I have filed an issue with Google (but I give that about as much odds as writing one's congresscritter). Or is there some easier way to use Iceweasel with Google Maps Street View by making more about:config webgl tweaks?
Centos 5.4 64bit fully updated. What I am doing is vsftpd is setup and nfs shares are mounted to a NAS server which is running openfiler 2.3 fully updated. openfiler is winbind to AD and pulling users and groups over.
I have it confirmed working when a ftp users connects the username/password is authenticated against AD which works. User can login and is directed to the users folder on the nfs share.
Openfiler shows me UID and GID numbers for users and groups, centos also shows me UID and GID but they are different which is causing permissions/quota's to not work right.
Both servers are setup with krb and winbind, openfiler has a more recent version of winbind.
Here is an example...
AD Users are
user UID of 160010 as an example user1 UID 160011
When user logs into the vsftp server it works and chrooted into the directory for that user. When user uploads files I can upload but the UID in the ftp client shows 1600011 which is user1 UID
logging into windows to that share shows in the security tab that user1 uploaded the files.
Centos is mapping user as 160011 openfiler is mapping user as 160010 windows is showing the user1 in the security tab.
So it appears that centos is not mapping the right numbers to the right users and groups.
If you need details please ask for it and I will provide.
Both configs are nearly a match and I have made small changes to the config files smb.conf but it failed resolve these issues to work so I reverted back. kinit works with authentication, getent works, wbinfo -a and -u works. wbinfo -u user shows different results on both servers, but authentication works user/password and I tried a different password to test.
Is this a known bug or a silly misconfiguration? I had authentication GUI tool configure the winbind stuff so its all fairly standard on the centos machine and the openfiler gui configure winbind configs.
what i'm trying to do is create some distance between sets of child nodes in my freemind maps. See the attached png file to see what im getting at. Is there a way to do this, other than using clouds?
I've setup postfix using mysql tables and all works except for sending to an alias. The mysql logs show that postfix is only looking at the mailbox table for where to deliver the mail for the alias. However it is not looking in the virtual alias maps table. There are no complaints from postfix on startup to indicate that there is anything wrong, and if I send to a virtual domain listed as a relay on the server it does look up the virtual alias table... even though the domain is not hosted on the server....
So the question I have is where to look next? The mysql log shows the expected lookups from postfix EXCEPT for the virtual alias map queries.... why would it not be checking the table? Since it is not looking up the virtual alias it bounces the addresses back to sender complaining that the user doesn't exist... It does deliver to a virtal mailbox, however again it never checks the vitual alias table.... so it only delivers since there's a mailbox for it rather than needing an alias...
When I start the tightvncserver (vncserver -geometry 1600x1024 :1) and then connect to it with a vncviewer (tightvnc 1.3.0 on Win7 or vncviewer on 9.10) and then start a terminal (gnome-terminal or xterm) the m key it opens the envelope tab on the panel. The 's' key opens the shutdown applet.This did not happen on 9.10, or earlier
I've a folder named "lynx" in my desktop . It contains ebooks - pdfs,chms etc . The problem is sometimes when i open the folder in nautilus , the folder keep loading forever and sometimes it shows two or three files and keep on loading . But at some other times , folder contents are displayed just as any other folder(i.e normal ).
I installed Drupal and there is only one site. It I access the website [url] where Drupal is installed I can easily see it functioning properly. But on internet it is not loading properly the colors etc are not visible properly.
error found with your "Postfix virtual maps": No "map sources" were found in the Postfix configuration. your system is not ready for use by Virtualmin. how do I set this?
actually i have installed ubuntu inside windoz 7.it was working fine bt i was understanding the the grub file and made few changes in it.thereafter the grub is not loading
I have disks of Lucid Puppy 5.11 and MacPup 5.11. Both disks run very well on my laptop, an old 2001 model Sony Vaio which is already booting Ubuntu 10.04 UNE.
But neither finishes loading on my HP Pavilion a1020n desktop, which is running Windoze XP Home. They both bog down on looking for optical drives... interesting as I am loading them from CD and it reads the optical drives fine up to that point.
It's sad that a quick-loading portable Linux won't load at all on my newer, faster machine.
Maybe it's because the laptop has GRUB already? My HP chokes every time I try to modify the boot sector, lots of "wonderful" security features to keep Windoze from "getting corrupted".
I have installed Fedora in my hard disk,but the GUI is not working.I can still work using my command line,but my mouse is not working.Is there any way out without re-installation?
I'm using a 3G modem whilst o2 transfer over adsl. trouble is no websites load but I can resolve domains. I enabled masquerade on the PPP0 ( modem) interface. added the server as default route for all workstations.
iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE net.ipv4.ip_forward = 1″ to /etc/sysctl.conf
I have a linux server that I cannot really configure. I would like to upload via web page a quite big file ( ~100MB) but the server disconnect after 10 min. Is there any kind of software that can establish the connection without getting into server cfg details? If not what can cause this disconnection?What I need a simple web site when 50 ppl can upload short movies and then watch them. It needs to run localy (no .....)
I have a netbook with a XP/SuSE dualboot and I want to get rid of SuSE, I have EASEUS partition and I know thats probably the easiest way to get rid of it, but the problem is the loading screen, seeing as im on a netbook, the xp disk is out of the question and I lack a usb cd drive, how would I go about removing grub?
I am developing an extension for firefox that enables users to chat with any others who happen to be browsing the same website at the same time. The xul file adds a tool bar with a button "Enable Chat" in the browser toolbox. when a user clicks the Enable chat button, the server initiates the chat. I went through many tutorials for extension development. They have helped. But I cant seem to get my extension up properly. Ill just put up the contents of my files for extension..
/home/neethusha/extensions/blaze (blaze is the name of the extension) chrome/content/blaze.xul install.rdf chrome.manifest
[Code]....
I made the pointer to the extension in a file named "blazebutton @anywhere.com" and saved it in the firefox profile folder "/home/neethusha/.mozilla/firefox/d5ma3rr9.dev/extensions"
When i open the firefox in this profile, the extension is not loading...
