Working with knoppix 6.02 live cd, works fine on my laptop, but fails to show the full desktop on my AMD64 PC. i tried changing screen=1280x1024 but the screen goes to magnified status when i start GUI interface. I tried out knoppix -nohwsetup etc but no success
View 2 RepliesI want to make a live-USB containing among others both Ubuntu desktop i386 and Ubuntu desktop AMD64. How do I go about this? I tried using unetbootin, first adding i386 and then amd64, but that failed. My computer with an athlon II did manage to boot, and showed it had booted into the 64-bit version (ram shown was 3.9 GB, i386 goes to about 2.7 I think), my wife's computer with a pentium 4 did not manage to boot, got to a black screen. I think this is because casper has issues, being overwritten (I'd seen something to that effect somewhere), and thus only the latest version added being booted (in this case amd 64).
I'm under the impression that the startup disc creator included won't help, nor won't the multicd.sh script, so how do I circumvent the issues?
Every time I try to run another script from my knoppix.sh file, it pops up and says permission denied. I've also tried running the scripts manually after stopping the knoppix.sh script yet it still gives the same error.
View 2 Replies View RelatedI have downloaded an application for the sake of Monte Carlo simulation calculations from this link [url] and i discovered that i it didn't work in fedora 14 and it worked in knoppix , and i need it in fedora since my simulation software only works under fedora platform , How to make this tar source installed in fedora 14.
View 2 Replies View RelatedWhere is the ubuntu-10.04.2-desktop-amd64.iso.torrent or is there one? It's not listed here http://www.ubuntu.com/download/ubunt...ative-download only the ubuntu-10.04.2-desktop-i386.iso.torrent. Where is the ubuntu torrent down loads beside this url?
View 6 Replies View RelatedOn my dell inspiron laptop if I use a live cd to boot into Ubuntu and then reboot into Windows the computer freezes up within 5 minutes. I uninstalled everything that I had put onto my computer since I purchased it (less than a week ago) in desperate measures because I was ready to take it back and play stupid to get a replacement. Once I went on an uninstalling frenzy my problem was fixed, but I had to know if it was from a program I installed or the live cd I used so I tried it again and sure enough, within 5 minutes my computer was unresponsive. I was using usb flash drives for my live cd and this was on a different flash drive than the first. Just thought it should be known, and I'm not doing it again once I fix my less than a week old computer from this again.
View 2 Replies View RelatedI have upgraded my Kubuntu Lucid AMD64 desktop with KDE 4.5 using the kubuntu ppa backports. I am impressed with the overall visual and performance improvements. However I am facing the following issues after upgradation -
1. When I execute any application as root user (using kdesudo <app name>) they load with a primitive GUI. I have attached a copy of the dolphin application loaded as root user (kdesudo dolphin). Not sure how to restore the latest GUI for them. I tried running systemsettings as root user and tried to customize the theme little bit. But not much has changed
2. One new short cut for ExpoBlending has comeup in section Graphics. I am unable to execute it, since it has multiple missing dependencies, neither able to uninstall it.
3. I installed kpart-webkit and configured it using keditfiletype utility. Now while browsing certain websites such as facebook(after loading farmville application in facebook), I can see few dummy popup windows. Attached file contains one such screenshot.
I wanted to know which is the best firewall application for my debian squeeze amd64 home desktop. I prefer a simple interface yet powerful enough. After googling I found two options - gufw & firestarter. I am not sure which one to choose between these two.
View 6 Replies View RelatedI am looking for a copy of 11.04 desktop beta1 amd64 to download. This is running on an x120e. Beta1 installs and works but freezes every few hours. Beta2 almost fully installs but pops up with a friendly error that says "installation has failed" with not much helpful in the syslogs. 11.04 Final kernel panics half way through installation.
At this point, I've tried almost everything, so I'm just trying to get back on Beta1 to get stable because this is my work computer. There are a lot of links on google, but every single one went dead as soon as final was released. After that, I will work on trying to get 11.04 final installed properly.
I've been using this USB Wi-Fi Adapter since 7.10 on my previous box and it always worked fine. I've used it also on a 9.04PPC edition. Now I've got a new PC (AMD AthlonII x3 435, 4GB RAM) and I've installed Ubuntu 9.10 Amd64 Desktop, and this device won't work. It doesn't even show on lsusb. Here's my output:
Code:
roby@roby-desktop:~$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]...
Other commands (iwconfig, ifconfig, sudo lshw -C network) doesn't show anything that has something to do with wireless networking. I've also tried ndiswrapper, but I cannot manage to get x64 drivers (they comes only with an installer package for Vista64, wich I have not).
That's my kernel version and architecture:
Code:
roby@roby-desktop:~$ uname -mr
2.6.31-19-generic x86_64
videos videos work great, but unfortunately, when i try to access videos on hulu.com, i receive this error message: "we're sorry but we're unable stream this video to your system. this may be due to an adobe software limitation on 64-bit linux systems."
this is strange because hulu videos were working after i installed lynx but mysteriously stopped working. i don't have the swfdec-mozilla package installed nor the mozilla-plugin-gnash nor the flashplugin-installer.
what do i need to do to start clean and install the necessary packages?
Does anyone know where I can get, or have available for download, a 64-bit version of the Knoppix distro?
View 4 Replies View RelatedI have installed Knoppix 6.1 on a memory stick and run it on my laptop. Everything works well, Internet, e-mail and so on. I have a DVD with Linux program on and I been trying to install them but no success. (No .exe files here). It appears the program on the DVD comes in different formats ( different file extensions). Can someone tell me how to install programs on Knoppix 6.1
View 7 Replies View RelatedI thought I knew my way around a little, but apparently mounting is still a complete mystery to me. I'm trying to back up my data with Knoppix since Ubuntu won't start up. something weird is happening with the keyboard and it starts spamming ^[[26~ across the splash screen. When I try to read my hard drive, Knoppix tells me "mount: wrong fstype, bad option, bad superblock." It seems like it should be a pretty common error, but I haven't found any anything helpful and understandable that doesn't involve rebooting (won't get me anywhere with Knoppix). I think it has something to do with Knoppix insisting my drive is hda instead of sda, though I have read that Ubuntu likes to tell you hda is sda anyway. Knoppix is the only distro that has worked on a live boot so far.I've thought of trying dd, dd rescue, or just cp onto my external, but I don't know if Knoppix's hda business will make a working backup. The other computers around are all Windows with no extra space, so I don't know what the easiest and safest way is to test wether the back up worked.
View 14 Replies View RelatedI was trying to troubleshoot a problematic server. The server, which runs on CentOS 4.x, is attached to Hardware RAID / disk array. Since the OS partition is having issues, I plan to troubleshoot the server by booting up with Knoppix 6 in "knoppix 2" / text mode. Everything went fine except, I'm not able to see all volumes available on the disk array. Only the first volume is presented.
Based on this, I'm suspecting Knoppix 6 kernel is not supporting Multiple LUN by default, based on a few Google search. Tried kernel parameters such as "max_luns=128" and "max_scsi_luns=128" at boot prompt but no luck. how can I enable Multiple LUN support during boot time or right after boot time?
I can't open the cd drive because Knoppix is using it. Is there a way round this?
View 2 Replies View RelatedI want to transfer files from one comp to another. Its a few hundred gigs. Since the pc crashed i am using knoppix to access the drive and sharing over samba.
I'm using robocopy to copy the files. But i have a small problem with sleep. Every 30mins or maybe an hour knoppix goes to sleep and my transfer stops. How do i change the time or disable it completely? so i dont have to tap a key every 30mins
how can I autostart vnc server on my knoppix distro ?
View 1 Replies View RelatedI have been running a computer under Windows XP for years, and recently it stopped booting unexpectedly. It tries to load windows, but partway though loading a BSOD flashes and it shuts down. To remedy this and hopefully fix this, my frined lent me some Knoppix CDs that I could boot from. He also lent me some external hard drives. I want to be able to access my files on my old hard drive.
Here's the problem: (in Knoppix 6) When I try to mount my main partition of my hard drive, which shows as sda2 (sda1 is an old recovery partition left over from when I ran vista), the following message pops up: "A job is pending on dev/sda2" A little later another error window pops up: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." I want to be able to mount my hard drive in Knoppix 6.
I used mini-jackstick. I turned my speakers on, but still it just plays it with the internal speakers.
View 1 Replies View RelatedI have installed Knoppix 6.2/6.4, on the whole hard drive, when I want to change, e.g. my location from America to UK. I am being asked for a user password. On install there were no menus to put these passwords, unlike Ubuntu, which I am using at the moment, in and location etc. Once installed there is the Knoppix menu to add a root password, no problem, but when I put the root password in, on user password ,it wont accept this.
View 1 Replies View Relatedi have recently gotten the Knoppix 6.0, and have installed it on my usb flash drive. finally i can browse the internet again on that laptop, but alas, i can't watch any videos because flash player isnt installed yet. i tried to install it by myself and followed adobe's instructions but i just dont get why it won't install. here are my questions:
1. in the adobe instructions, it is said that i need to unpackage the files. and when i unpackage it, a new directory/folder is supposed to appear. but why does it always unpackage on the desktop? no folders are created when i unpackage it.
2. it is said that i need to navigate to the newly created directory and type a command. how am i supposed to navigate to a non-existent directory, huh? and how do you even navigate to certain directory? i typed help in the terminal (i'm using LXTerminal by the way) to look for a hint but i saw nothing there. so, how do you "navigate" using the terminal?
I really need to install the flash player. I've also tried using the Install components in start > system tools > install components and selected the 'flashplugin-nonfree: Flash support for your browser' but when i clicked install, nothing happens.
I want to install knoppix on my hard disk of my netbook, I did manage to boot knoppix from usb to a live session. But when I try to install it, it says my hard disk does not have a compatible partion table or something.
check this link:
[URL]
I have successfully used a Knoppix Live Boot CD to read the disks of a Windows Computer running XPI need to move some registry files around to make it boot into XP again, but I get a denied access error when pasting files into a directory
View 8 Replies View RelatedOn my ms windows machine, the OS went out of order, and I wanted to salvage all my pictures, and decided to use a live CD and move some of my media files to my mp3 player... its storage is 8 gigabytes I tried a latest Knoppix first, it did not provide me a nice GUI. Instead, it provide me with a humble looking, less than friendly, menu-based interface which I gave up on in about 3 minutes. I was thinking for a minute, and when I tried to install Ubuntu in the past, one of the options I was provided when I ran the Ubuntu installation CD was "Try Ubuntu without installing it" and I thought it meant the Ubuntu installation CD could also be used a live CD. And I put together an Ubuntu CD and attempted to use it as a live CD! ah man it was beautiful. It even recognized the video card on my machine. I am never going back to knoppix. From now on, when someone ever mentions Knoppix to me, my response will be, "what is Knoppix?"
View 11 Replies View RelatedNew to Linux,after burned live cd,was left in the drive,then fund out the disk,from the drive next morning,and the computer(inspiron dell,windows vista)came with blue screen,after reboot the computer i have the black screen with this.ot boot device available after run knoppix live cd..."then i did F8 and when to windows system boot options, no one worked sofar,even r repair,then i did put the burned linux disk"knoppix live cd is mounted but was in germany,spanish and english are my options,do not what to do it next,how can i recover the windows system?i'm downloading another live cd in english,but no sure if the previous disk version,that i don't know wich it's? is going to be a problem with the new disk,the original intention with the disk,was to repair a dell xps 2010 with the windows32 system corrupted,some said that's possible with linux.
View 2 Replies View RelatedInspired by Knoppix Adriene, I am trying to install it on my netbook. However, I don't want the knoppix repositories since most of them are outdated.
How do I add ubuntu or linux mint's repositories to Knoppix? I guess I need to install the gpg-key also for each repository, correct?
I use Linux but have a computer with windows I use for gaming. It died and put the hard drive into another computer and used knoppix to recover my files. I looked at the ownership of the windows files and the owner is knoppix. Now I am concerned that ownership will not work on my new Windows computer (when I finish building it, that is). Since I don't get into Windows much I have no idea what those permissions should be.
If I copy them with owner knoppix can I even access them in Windows to change the ownership to whatever Windows will accept? If I change the ownership before putting them on a CD with knoppix, can I write the CD? I will have to use the hard drive on the new windows box so will not have access to the files later (unless I also copy them to my Linux computer for safekeeping). At least I know the ownership changes to make with Linux.
I am working on a computer that the hard drive crashed. Inititially they had a virus, reloaded windows, and had the computer up and running. When downloading software it crashed and will not boot. I have tried all the numerous routine fixes with no success including using the repair discs. The repair discs no longer work and they are unable to get a second set. As a last resort I am able to access the hard drive when booting from Knoppix from a CD. There are a couple things I would like to try from Knoppix, but do not know if it is possible. First, Is it possible to load the boot files from knoppix? Second, can you roll back the drivers from knoppix?
View 1 Replies View RelatedI want customized image of knoppix 6.2 version. Please let me know how to customize and create CD/DVD knoppix image.
View 1 Replies View Related