Ubuntu Installation :: Make A Live-USB Containing Among Others Both Desktop I386 And Desktop AMD64
May 1, 2010
I want to make a live-USB containing among others both Ubuntu desktop i386 and Ubuntu desktop AMD64. How do I go about this? I tried using unetbootin, first adding i386 and then amd64, but that failed. My computer with an athlon II did manage to boot, and showed it had booted into the 64-bit version (ram shown was 3.9 GB, i386 goes to about 2.7 I think), my wife's computer with a pentium 4 did not manage to boot, got to a black screen. I think this is because casper has issues, being overwritten (I'd seen something to that effect somewhere), and thus only the latest version added being booted (in this case amd 64).
I'm under the impression that the startup disc creator included won't help, nor won't the multicd.sh script, so how do I circumvent the issues?
View 4 Replies
ADVERTISEMENT
Apr 26, 2010
I downloaded the ubuntu-10.04-rc-desktop-i386.iso file and burned it to a CD - i.e. what I thought would be a standard Ubuntu Live CD experience. Imagine my surprise when:On a black screen, there was a new (small) window on the left and a (small) meaningless stick figure on the right at the bottom of the screen, and after a while I got the error window entitled:
Installation failed
The installer encountered an unrecoverable error.
A desk top session will now be run so that you may
investigate the problem or try installing again.
Since when is installation (with no user interaction) a default when using a (Live)CD ISO image of any Ubuntu RC or otherwise?My only purpose was to boot up into the Live CD environment - but that was not only not presented as an option (normally there is a 30 second countdown) and the usual default is to boot up into the Live CD environment.This was not the case with the RC! Why not?
View 1 Replies
View Related
Apr 29, 2011
I am looking for a copy of 11.04 desktop beta1 amd64 to download. This is running on an x120e. Beta1 installs and works but freezes every few hours. Beta2 almost fully installs but pops up with a friendly error that says "installation has failed" with not much helpful in the syslogs. 11.04 Final kernel panics half way through installation.
At this point, I've tried almost everything, so I'm just trying to get back on Beta1 to get stable because this is my work computer. There are a lot of links on google, but every single one went dead as soon as final was released. After that, I will work on trying to get 11.04 final installed properly.
View 1 Replies
View Related
Feb 18, 2010
I recently upgraded my hardware and installed 32-bit Karmic (well really Mint 8 ) before realizing I would probably have gotten better performance from the amd64 architecture. Is it possible to convert an i386 system to amd64? Is it a good idea? Will there be a lot of problems afterwards? Is it easier to just backup home and etc, install a clean 64-bit system, then restore settings from backup? If I do convert the system, how do I do it? I thought I might be able to just install a different kernel but I can't find an amd64 kernel in the repositories..
View 8 Replies
View Related
Oct 17, 2010
I got the xubuntu-10.04-desktop-i386.iso file in a folder with WUBI but it still keeps trying to downlaod the amd64 version. how can I stop this?
View 6 Replies
View Related
Mar 25, 2011
I installed Debian Squeeze on a laptop today, with the official i386 DVD1. At the end, I was very disappointed to notice the installer automatically chose the amd64 kernel (with i386 packages ? how does that work ?). The hardware is compatible, but I'd really like to use the i386 kernel instead. Earlier, you could choose the kernel during installation ; I looked in Expert install with no luck. Where is it ?
View 4 Replies
View Related
Aug 4, 2011
I just installed Debian stable from the standard i386 DVD. When I booted up, I noticed that GRUB showed me that I had the amd64 version of Debian installed. However, I did not download an amd64 DVD, nor do I want that architecture installed on my system (even though my system can support it). The output from "uname -a" (which included both "amd64" and "x86_64") also seem to confirm this. However, I was able to install 32 bit packages and get them to work (gdebi wouldn't even let me do this when I had Ubuntu 32-bit).
View 4 Replies
View Related
Jan 8, 2010
im trying to install ubuntu 9.10 desktop i386 version, but i simply cant do it! I have tried for hours now. I boot my computer, the cd-room boots, i choose language from the list and press install ubuntu, after that i see the ubuntu logo blinking and in few minutes it gets black and shows "Input Not Supported" and its just bumping around the screen! I had a feeling that maybe my monitor (ASUS) does not support ubuntu so i tried with a very old syncmaster monitor, but similar message appeared! What could be the problem?
View 1 Replies
View Related
Aug 24, 2010
I use Ubuntu 10.04. make my desktop as like as the attached desktop-look? provide me the info about which theme / icon / window border to use to make my desktop exactly as that attached look. I'll be very much delighted if I can make this desktop.
View 6 Replies
View Related
Jun 23, 2011
Where is the ubuntu-10.04.2-desktop-amd64.iso.torrent or is there one? It's not listed here http://www.ubuntu.com/download/ubunt...ative-download only the ubuntu-10.04.2-desktop-i386.iso.torrent. Where is the ubuntu torrent down loads beside this url?
View 6 Replies
View Related
Jun 16, 2010
When I customize the Ubuntu 10.04 LTS live CD, what files do I need to change in order to add another launcher to the live user's desktop?
View 1 Replies
View Related
Oct 19, 2010
On my dell inspiron laptop if I use a live cd to boot into Ubuntu and then reboot into Windows the computer freezes up within 5 minutes. I uninstalled everything that I had put onto my computer since I purchased it (less than a week ago) in desperate measures because I was ready to take it back and play stupid to get a replacement. Once I went on an uninstalling frenzy my problem was fixed, but I had to know if it was from a program I installed or the live cd I used so I tried it again and sure enough, within 5 minutes my computer was unresponsive. I was using usb flash drives for my live cd and this was on a different flash drive than the first. Just thought it should be known, and I'm not doing it again once I fix my less than a week old computer from this again.
View 2 Replies
View Related
Jun 29, 2010
I'm new to Linux, so I decided to try using Wubi to get started. THe problem is, when it finished installing 10.04, I got this message: OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-10.04-desktop-amd64.iso' Is there any way around this? It might just be that overly restrictive thing called Vista (which I have the bad luck to be using). I was considering getting a USB drive for Ubuntu anyway..
View 1 Replies
View Related
Jun 17, 2010
I have just been trying to fix a friends comp, they had Windows crash, and it wouldn't reinstall properly. So I thought I'd put Ubuntu 10:04 on it instead. I burnt the CD today from an ISO that I've used perfectly fine in the past. When I finally got it to boot into the trial desktop. The install button on the desktop wouldn't work. Everything else that I tried to run would run fine. is there some way that I can run it from the terminal or could this indicate a fault in the Live CD?
View 2 Replies
View Related
Jul 11, 2010
I'm attempting to install Ubuntu on my girlfriend's old desktop. Her gateway laptop's motherboard just died on her, and until we can figure out a real solution she's using this old desktop that was running Windows XP. It was her parent's and it's an eMachine. So, meh. It's whatever.
I have an Ubuntu disc from Canonical and one from burning the .iso image. I've been fighting with it all evening trying to just get the thing to boot. It starts up, shows a purple screen with an Ubuntu logo on the bottom. If I don't hit Enter it will go into a crazy cycle of black screen command line things. It says various errors, but moves too fast for me to see anything that is actually happening. However, if I do hit Enter it takes me to the "Try Ubuntu without installing, etc." screen.
No matter what I hit from the selection, it goes to the black screen with random command line entries floating about. Various error, various actions being done. If I hit to run as Live CD or Install it, it will eventually stop and say "Welcome to Ubuntu! *insert website address here*" and give me the chance to type in commands.
ONCE during the power on/power off cycles of me fighting did the Live CD actually run. It ran nicely, and I clicked the icon to install Ubuntu and it got to 49% complete and said there was an error with the disc. I installed Ubuntu on my desktop last week with the same disc flawlessly. It ran with the real Ubuntu disc, the burnt ones do nothing.
I could tell you system specs but Windows was erased during the Live CD stint and there are no stickers on the front to tell you. But I can crack it open and look if needed.
View 3 Replies
View Related
Nov 6, 2010
Cd is not booting properly . . only option for choosing installation option comes .. when entered "demo" or "install ubuntu " only a black screen comes with only a "_" blinking ..
I waited for half hour and still that cursor not stopping blinking ..And I have tried install with windows but when rebooted with ubuntu same thing happens . Also tried in VirtualBox and It works properly in it.
View 9 Replies
View Related
Feb 11, 2011
When I try to boot from the Live CD of Ubuntu 10.10, I end up with a whitish corrupt screen, which should be the 'Desktop'. The CD is good and works on other PC's. I have tried two other graphics cards with the same result. It is therefore impossible even to install it. I have installed many other versions without problems. This PC works perfectly with Windows XPVistaWindows 7 and other Ubuntu versions.
View 3 Replies
View Related
Aug 21, 2010
I have upgraded my Kubuntu Lucid AMD64 desktop with KDE 4.5 using the kubuntu ppa backports. I am impressed with the overall visual and performance improvements. However I am facing the following issues after upgradation -
1. When I execute any application as root user (using kdesudo <app name>) they load with a primitive GUI. I have attached a copy of the dolphin application loaded as root user (kdesudo dolphin). Not sure how to restore the latest GUI for them. I tried running systemsettings as root user and tried to customize the theme little bit. But not much has changed
2. One new short cut for ExpoBlending has comeup in section Graphics. I am unable to execute it, since it has multiple missing dependencies, neither able to uninstall it.
3. I installed kpart-webkit and configured it using keditfiletype utility. Now while browsing certain websites such as facebook(after loading farmville application in facebook), I can see few dummy popup windows. Attached file contains one such screenshot.
View 7 Replies
View Related
Mar 2, 2011
The link to ubuntu-10.04.1-desktop-i386.iso.torrent is not found on the [URL] ative-download page. The 10.10's are ok.
View 2 Replies
View Related
Jun 18, 2010
Working with knoppix 6.02 live cd, works fine on my laptop, but fails to show the full desktop on my AMD64 PC. i tried changing screen=1280x1024 but the screen goes to magnified status when i start GUI interface. I tried out knoppix -nohwsetup etc but no success
View 2 Replies
View Related
Jun 21, 2011
1)If I installed the Alpha-1 11.10, is it easy to upgrade to newer versions later on until the Final Release?
2) How to make the desktop taskbar appear in ubuntu natty of Unity desktop as previous Gnome? Possible or not?
View 5 Replies
View Related
Aug 13, 2011
I have installed Ubuntu 11.04, 64 bit and now I am trying to install/configure MFC-7420 scanner part (printer works fine)I tried to follow the steps listed at http://ubuntuforums.org/archive/index.php/t-590793.html, but I don't have etc / udev / rules.d/45-libsane.rules file to edit and can not continue with the remaining steps of the guide.
I also tried to follow the steps provided by the Brother Solution Center http:[url].... I have downloaded brscan2 64 bit and installed without error but when I tried to install the brscan-skey-0.2.1-3.amd64.deb using >sudo dpkg -i --force-all brscan-skey-0.2.1-3.amd64.deb I get the following error:
************************************************** **************************************************
sudo dpkg -i --force-all brscan-skey-0.2.1-3.amd64.deb
[sudo] password for aUser:
dpkg: warning: overriding problem because --force enabled:[code].....
Which dependencies am I missing? or What am I doing wrong?
View 1 Replies
View Related
Jun 11, 2009
I successfully installed fedora live CD KDE version on virtual PC. but I can't install the live CD Gnome desktop version. details: I just add vga=0x32D on boot, no problem booting after that. I am now log-in as live user, but I can't find the shotcut for installation on desktop "install to hard drive" but using the terminal, there's a file under Desktop, 'liveinst.desktop" I tried running it, graphical installation will appear, but during copying to hard disk, it says bad media.
View 1 Replies
View Related
Feb 27, 2011
I wanted to know which is the best firewall application for my debian squeeze amd64 home desktop. I prefer a simple interface yet powerful enough. After googling I found two options - gufw & firestarter. I am not sure which one to choose between these two.
View 6 Replies
View Related
Jun 29, 2010
Is there an easy way to downgrade from the AMD64 version to the I386 version of 10.04. I am having all sorts of problems with my machine running the AMD64 version of Ubuntu. The same problems do not occur on my netbook where I use the I386 version.
View 6 Replies
View Related
Oct 12, 2010
I have an Amd64 processor. I guess that I should install the amd64 alternate cd instead of the i386 installation. What would be better for me and which problems can occur?
View 1 Replies
View Related
Jan 5, 2011
I have a Intel machine and what do i do? I install the AMD64 and not the i386. DO i need to uninstall the AMD and instal the i386 for my 64 bit machine?
View 10 Replies
View Related
Feb 19, 2011
I was trying to make my Desktop accessible from anywhere with DynDns. I have AT&T 2wire router 2701-hg b router. which doesnot have dyndns settings.
So installed ddclient. its running fine..
I did tracepath
I did nslookup
View 6 Replies
View Related
Apr 13, 2011
I'm fairly new to using Linux. I just had a simple opinion based, question and one direct question: 1) What are some package options I can use to make my desktop environment prettier? I have Compiz Fusion installed, I use the cube and and Expo. I'd like to have background options for the expo and I'd like some better, Sci-FI-ish Themes under System>Preferences>Appearence. 2) As for what I need to know directly, I have a built in Microphone on my Laptop (Compaq 8510w) and I'm fairly sure I haven't installed a package or driver option to allow it to work for Skype ect... What might that/those package(s) be?
View 3 Replies
View Related
Jun 4, 2010
First, the official download page is 32k download. I've NEVER had that slow of a speed before. I've downloaded and used Ubuntu since Drake. The only desktop iso for AMD64 is 698k (Official download).
I've downloaded that image for AMD64 10.04 from two download locations and burned the CD. When I boot, I only get the install option in a non-graphical environment. No LiveCD button.
View 4 Replies
View Related
