I have installed my server running centos 5.6 on single LVM partiton
scheme is luke this:
/boot - ext3
Volume Group
- System LV - /
- Swap LV - swap
how can i separate devide root partition on several partition for separate directories like
Volume Group
- System - /
- Home - /home
- Var - /var
- Swap - swap
Is there any chance to do this ? also is there are basic recomendations for server partition sizes ? i will have mail server and virtual host there in /home vmail and vhost is it ok: 10gb - /; 20gb - /var; 200gb - /home ?
of course after doing separate LVM partitions i can expand them in future, but what are basics ?
I have two hard drives one with Windows XP and one with Ubuntu 10.04. The hard drive with Windows XP has been dying out slowly over the last week thankfully I backed up all my important information. The problem is that now that the Win XP hard drive is dead I can't boot into Ubuntu nothing pops up just the blinking cursor. I believe this is because when I installed ubuntu the Windows XP HD was already in the first slot and may have all the boot information. I have the LiveCD and can boot into that successfully.
I have a 320gb USB hard drive, one partition for my files, one for playing Wii games, and one which I would like to use for an Ubuntu instillation. To do this, I partitioned my disk accordingly using Windows, then booted from the Ubuntu CD to install the OS to my external hard drive partition. It asked me where I wanted to install the boot loader, so I selected the hard drive itself, rather than the specific partition, reasoning that it would scan the hard drive for a boot record. However, when I booted it (with USB boot selected) it simply said "No Operating System found, replace system disk and press enter" or something similar.
want get Linux mint8 on to a separate partition but when i go into advance in the partition menu and and chose the partition i want,in this case (e),(c) having windows xp on it.it says ...no root file system is defined.
I just bought a new hard drive so that I could convert my XP-only machine into an XP-Ubuntu-Windows 7 triple boot machine.Since the drive is absurdly huge (1 TB) I wouldn't mind throwing ReactOS into the mixtoo.I just found out that master boot records are limited to 4 entries, meaning 4 primary partitions. I had Windows XP set up on my old drive as a boot partition, a program files partition and a media partition. Since I really didn't want to install XP from scratch, I cloned this setup on my new drive.
This leaves me one MBR partition entry for installing Windows 7, Ubuntu and ReactOS. I'd like to avoid having to install XP from scratch like the plague, partly because it's supposed to be a safety net in case things go wrong with my other OS's and because I've invested a lot of time getting it set up exactly the way I like it.Here are the options I've considered and why I don't like them:Install Windows 7 on my media partition. This would work, but I prefer to keep my media partition completely separate from any OS, so that I can reformat an OS partition without affecting my media partition at all.
Use wubi or something to install Ubuntu in the same partition as something else. Again, this is brittle.Move all my media to a logical drive on an extended partition. Create another logical drive on this extended partition for Ubuntu. The problem here is that extended partitions are rather brittle--if you nuke one, it renders the rest useless.Just put the old drive back in my computer and run XP off it. Use the new one for the other OS's. The problem here is that the old drive is slower and uses extra power, generates extra heat, etc.
I have multiple distros that I chainload and I have installed a grub2 shell to the partition and can boot manual. I can not seem to get a grub.cfg file to work. Is there a directory that needs to be built for this file?
I originally had my full hard drive as a full Ubuntu partition but I then re-sized that and installed Windows on a new partition. Now I guess the boot sector got overwritten and I don't have a choice to boot either Windows or Ubuntu. I know I have to reconfigure GRUB or another boot loader to allow the choice but I am not sure of how to go about that.
one would have to exclude certain folders / directories but would the backup be possible if the system is up and running in its native "live" state ? Which directories could be excluded ? Does swap need to be turned off ? I would like to make incremental backups on a separate partition of the same hard drive. I will endeavour to backup the MBR/ Partition table using dd.
Im following an installation guide (Oracle ASM) which requires me to create a partition on the disk and gives the following example: Code: fdisk /dev/mapper/< alias >kpartx /dev/mapper/< alias >< partition > Im struggelling what <alias> and <partition> need to be substituted for, I have tried to look this up but all that is returned are bug fixes etc generally things that dont make much sense to a newbie like me.
My debian 5 is up and running smoothly and act as file-server in the middle of windows network jungle using samba the only problem is, after backup an external hdd (213 GB) to my /home partition, I end up with message say that I'm running out free space. Fyi my debian installed on 1TB SATA disk, and I separate my /home partition from system what happen to my free space ? here is screenshot of my disk, using disk usage analyzer: is there is a way to get my space back or something missing on my setup.or I have to reinstall my debian and use LVM when partitioning my disk?
I need to copy data from a single HD, which used to be part of a Linux RAID 1. I've googled around, but can't find any clue how to mount partitions from this single HD.
Background: The HD comes from a linux based NAS box Synology DS207+. The NAS uses ext3 as filesystem. Both NAS disks are fine, but the other NAS hardware is dead and not worth repairing or replacing.
So I tried adding a new, 2nd hard drive to my Ubuntu 9.04 desktop for some additional storage and only managed to kill my system so that it won't boot up anymore (I just get a blinking cursor after the BIOS does its thing).I could sure use a little help getting back to a functioning system, and then adding the second drive. I tried following the instructions from this link to add the 2nd drive:
(So the forum rules won't let me post the link, neato. Here it is with spaces added): h t t p s : / / h e l p . u b u n t u . c o m / c o m m u n i t y / I n s t a l l i n g A N e w H a r d D r i v e
I was surprised not to find an existing thread on this anywhere, as I would expect this to be a common problem: I have the following partitions on my eee PC 100HE:
10GB Windows XP 5GB Linux Mint 8 5GB Ubuntu 9.10 NBR (awesome distro by the way!) 130GB Home partition shared by Linux Mint and Ubuntu NBR 2GB Swap partition shared by Linux Mint and Ubuntu NBR
I installed Ubuntu NBR after Mint. Immediately after install, the panel layout, menus and colour scheme were slightly messed up - presumeably because they had been "adopted" from the Mint settings in the home folder. I corrected them easily, but now I have the same problem in Mint. Is there any way I can get both distros to use the same /home folder, but different settings (i.e. the /home/username/. folders)? Can I get these settings folders put on a different partition for example?
And is this problem due only to the fact that these are 2 Ubuntu-based distros? Or will I have the same problem if/when I replace Mint with another distro, such as Fedora or Moblin?
I have two seperated video clips, that captured same event from two cameras. i would like to create one clip, that will show one on the left side, the second on the right side, and play together.
I keep my /home on a separate partition. After every clean install of Ubuntu my old panel configuration is loaded. Meaning, shortcuts on my panel and different applets I've put on my panels as well.
what file in the /home folder is keeping these settings? Simply, I'd like to delete so I can have that "fresh" install feeling on my desktop.
is their a boot partiton that need to be kept seperate in ubuntu? Screenshot.png those are my partitons in the pic above am i okay to merge them all into the dev/sda2 or is it like windows and i need to keep a small section back for the boot?
I have installed various distros/releases of linux over the past few days and have read of a few people keeping separate partitions for their /home folders. I have a few questions:
1) I assume /home is installed with the OS and would always be on the OS partition.
2) Can I repartition the drive even though I am already installed to allocate space or would I have to start from scratch, create the partitions, and reinstall the OS?
3) How much space would one need for a home folder? Majority of hdd right?
I run several OSes (all Linux) on my computer. I set a separate partition for each one. I want to run Fedora 13 LXDE mainly for a game or two that are in the Fedora repos but not in any others, so I will not need a lot of space. But I want to make sure there is enough room for the OS.
I want to be able to play CloneKeen, so I will need enough space for that. I may find some other games, as well, so I will need some extra space. I have my other two OSes on six GB apiece, and Peppermint actaully uses barely half of that. Will 6GB be enough for a basic Fedora install with a few games installed? I will not really use Fedora for anything else, probably.
P4 2.4gHZ 2.0GB Ram I have tried to do some reading on this by googling and such, but it is all a bit overwhelming and so many posts/articles want to deal with dual booting which I am not planning to do on this machine. I am trying to find some info on whether it is better to have a separate boot partition. As in, separate from root partition. I have read that a separate boot partition makes for a quicker start and better recovery if system crashes. I will shortly be installing openSuse 11.2(KDE) [currently on 11.0] and I want to optimise the partition scheme so that it is the most efficient. I have a 160GB HDD that will be housing this new installation, so space is not a problem. I am only user on this machine. Currently, it is just partitioned as such:
2.0GB - swap [because I read it should equal Ram] 32.0GB - / 40.0GB - /home 76.8GB - extra storage [Not really necessary as I have 2 other HDD on system 1 - 320GB and 1 - 200GB]
Also, is it recommended to have separate partitions for /tmp /var or any other /nnn ?
I want to get into the Linux world and trying to install openSuse 11.3 on a separate partition, so I can start getting familiar with it. Installation started and PREPARATION was OK. INSTALLATION WAS OK. While doing Automatic Configuration after a little while the program stops (it hangs). I have to restart the computers by pushing the hdw reset button.
At next reboot, at the partition menu I choose openSUSE option; the program starts and after a while it says that previous installation failed and ask me if I want to retry. I do choose yes, but than again same thing happens - hangs and does not complete automatic configration (which by the way seems to be the last step of the installation). PC is a 2,8GHz, 1GB RAM, Windows OS XPHome and Service PAck3, and now partially loaded openSUSE11.3. OS
I have a dual boot system with Vista and OpenSUSE 11.3 . Linux is distributed over 2 partitions: one for /home and one root partition for all the rest. As this root partition is getting filled, I thought of taking a 10 GB partition from the Vista partition and using this for the /usr folder (= 6 GB). This partition is a primary partition, while the rest of Linux is on secondary partitions.To be save, I renamed the existing /usr to /usr-old and created an empty /usr as mount point. I changed fstab to load the root partition, the /usr partition and then the /home partition.But when I started the system, there were a lot of errors about files not found in the /usr folder, lthought this folder and is content were clearly present when browsing the filesystem. What went wrong? Hard links? Other system configurations to change? Not possible to put /usr on a separate partition?
I'm about to reinstall Ubuntu and one thing I'd like to do is create a separate partition for /home. also what are the exact benefits of that?upgarding ubuntu doesn't necessarily delete your files right?is it just as a security measure in case the kernel becomes corrupted?
I have ubuntu installed as my main operating system with a separate home partition, I also have windows 7 here, although I haven't used it since I installed it. I was planning on using it a bit more, since I'm getting a bored of ubuntu, so I thought I'd get a little variation Anyway, I have this separate home partition (ext4) formatted, that I logically can't access from windows. So I thought I'd make a "shared" partition (NTFS) with my files on it, so I could access them from both ubuntu and windows. Now, can I revert to having my home partition on my Ubuntu partition, or do I have to reinstall or something?
I've been wanting to do this for awhile now, But just got around to having the time/energy to do it.Getting a separate /Home partition is my main goal,But Ive got a couple others as well.
I've never really done much work manually editing/extending/creating of partitions, Soo Im going to need really simple, noob-like instructions if possible. I'd love to get this on the first try without having to start all over.. So I come to you first, before I just jump in and start clicking things.
I have a 320gb USB hard drive, one partition for my files, one for playing Wii games, and one which I would like to use for an Ubuntu instillation.o do this, I partitioned my disk accordingly using Windows, then booted from the Ubuntu CD to install the OS to my external hard drive partition. It asked me where I wanted to install the boot loader, so I selected the hard drive itself, rather than the specific partition, reasoning that it would scan the hard drive for a boot record.However, when I booted it (with USB boot selected) it simply said "No Operating System found, replace system disk and press en
I was hoping you could help me figure something out... I am going to install a new distro onto my laptop and i usually set up partitions for / and /home just in case i have some issues and need to reinstall... i was wondering if there were a way to setup a separate partition where i can put all the programs i wish to install?
Trying to dual-boot OpenSolaris and FC10 is difficult because Solaris grub doesn't know about ext3 and Fedora grub doesn't know about ZFS. I was able to rescue my FC10 installation by creating a new FAT16 partition and restoring /boot to it from a dump, and then doing a grub setup to it. A complication is that anaconda doesn't seem to be able to find /dev/md0 (both the Solaris and FC10 installs use mirrored disks).
This process moved the FC10 ext3 partition from /dev/sda3 to /dev/sda4, but the other half of the mirror is still /dev/sdb3.
When I boot FC10 I get a "can't load image" error from grub, but it still loads FC10 successfully. It makes no difference if menu.1st/grub.conf has "root (hd0,1)" (the FAT16 partition) or "root (hd0,3)" (the FC10 ext3 partition).
If a future yum update were to try to install a new kernel, my FAT16 partition would not be updated. It seems to me both these problems might be solved if I could move /boot from /dev/md0 to /dev/sda2 (/dev/sda2 is the FAT16 partition).
Rather than go through yet another install, would the following work?
from FC10, move /boot to (say) /boot.0 mkdir /boot edit fstab to include "mount /dev/sda2 /boot"
If I try this and it doesn't work, I can't see any way to undo it since anaconda doesn't seem to be able to mount /dev/md0. If a grub guru sees this, perhaps they could suggest a better alternative, or if not, whether this will work or not.
Additionally, although there are two alternatives in menu.1st/grub.conf, grub doesn't display a menu - it goes directly to boot. Any idea why? I suppose this might be a Solaris stage1 grub problem...
Since FAT16 doesn't support links, it isn't possible to link grub.conf to menu.1st. Are they both required?
Everything works fine, the setup went very well. But I got to thinking (A dangerous thing for me). In Ubuntu I am using separate partitions for / (root) and /home. I was wondering, during install of Fedora, could I use the separate partition I am using now for both root and /home for just / (root) and use the Ubuntu /home partition for Fedora (set the mount point for /home to the same partition as I did for Ubuntu and not format the drive)? This would allow me to seamlessly use the /home partition and not require duplication of files. I can mount the Ubuntu /home dir while in Fedora.I can share the /home partition with two different installs of Ubuntu (been there).
