Fedora Installation :: How Big To Make Separate Partition
Aug 5, 2010
I run several OSes (all Linux) on my computer. I set a separate partition for each one. I want to run Fedora 13 LXDE mainly for a game or two that are in the Fedora repos but not in any others, so I will not need a lot of space. But I want to make sure there is enough room for the OS.
I want to be able to play CloneKeen, so I will need enough space for that. I may find some other games, as well, so I will need some extra space. I have my other two OSes on six GB apiece, and Peppermint actaully uses barely half of that. Will 6GB be enough for a basic Fedora install with a few games installed? I will not really use Fedora for anything else, probably.
View 4 Replies
ADVERTISEMENT
Apr 23, 2009
Trying to dual-boot OpenSolaris and FC10 is difficult because Solaris grub doesn't know about ext3 and Fedora grub doesn't know about ZFS. I was able to rescue my FC10 installation by creating a new FAT16 partition and restoring /boot to it from a dump, and then doing a grub setup to it. A complication is that anaconda doesn't seem to be able to find /dev/md0 (both the Solaris and FC10 installs use mirrored disks).
This process moved the FC10 ext3 partition from /dev/sda3 to /dev/sda4, but the other half of the mirror is still /dev/sdb3.
When I boot FC10 I get a "can't load image" error from grub, but it still loads FC10 successfully. It makes no difference if menu.1st/grub.conf has "root (hd0,1)" (the FAT16 partition) or "root (hd0,3)" (the FC10 ext3 partition).
If a future yum update were to try to install a new kernel, my FAT16 partition would not be updated. It seems to me both these problems might be solved if I could move /boot from /dev/md0 to /dev/sda2 (/dev/sda2 is the FAT16 partition).
Rather than go through yet another install, would the following work?
from FC10, move /boot to (say) /boot.0
mkdir /boot
edit fstab to include "mount /dev/sda2 /boot"
If I try this and it doesn't work, I can't see any way to undo it since anaconda doesn't seem to be able to mount /dev/md0. If a grub guru sees this, perhaps they could suggest a better alternative, or if not, whether this will work or not.
Additionally, although there are two alternatives in menu.1st/grub.conf, grub doesn't display a menu - it goes directly to boot. Any idea why? I suppose this might be a Solaris stage1 grub problem...
Since FAT16 doesn't support links, it isn't possible to link grub.conf to menu.1st. Are they both required?
View 2 Replies
View Related
May 29, 2010
I am triple booting
Windows xp
UBUNTU 10.04
Fedora 13
Everything works fine, the setup went very well. But I got to thinking (A dangerous thing for me). In Ubuntu I am using separate partitions for / (root) and /home. I was wondering, during install of Fedora, could I use the separate partition I am using now for both root and /home for just / (root) and use the Ubuntu /home partition for Fedora (set the mount point for /home to the same partition as I did for Ubuntu and not format the drive)? This would allow me to seamlessly use the /home partition and not require duplication of files. I can mount the Ubuntu /home dir while in Fedora.I can share the /home partition with two different installs of Ubuntu (been there).
View 1 Replies
View Related
Jan 22, 2010
one would have to exclude certain folders / directories but would the backup be possible if the system is up and running in its native "live" state ? Which directories could be excluded ? Does swap need to be turned off ? I would like to make incremental backups on a separate partition of the same hard drive. I will endeavour to backup the MBR/ Partition table using dd.
View 6 Replies
View Related
Aug 16, 2009
install fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"
View 3 Replies
View Related
Feb 7, 2010
I was surprised not to find an existing thread on this anywhere, as I would expect this to be a common problem: I have the following partitions on my eee PC 100HE:
10GB Windows XP
5GB Linux Mint 8
5GB Ubuntu 9.10 NBR (awesome distro by the way!)
130GB Home partition shared by Linux Mint and Ubuntu NBR
2GB Swap partition shared by Linux Mint and Ubuntu NBR
I installed Ubuntu NBR after Mint. Immediately after install, the panel layout, menus and colour scheme were slightly messed up - presumeably because they had been "adopted" from the Mint settings in the home folder. I corrected them easily, but now I have the same problem in Mint. Is there any way I can get both distros to use the same /home folder, but different settings (i.e. the /home/username/. folders)? Can I get these settings folders put on a different partition for example?
And is this problem due only to the fact that these are 2 Ubuntu-based distros? Or will I have the same problem if/when I replace Mint with another distro, such as Fedora or Moblin?
View 6 Replies
View Related
Nov 14, 2010
I have a 320gb USB hard drive, one partition for my files, one for playing Wii games, and one which I would like to use for an Ubuntu instillation.o do this, I partitioned my disk accordingly using Windows, then booted from the Ubuntu CD to install the OS to my external hard drive partition. It asked me where I wanted to install the boot loader, so I selected the hard drive itself, rather than the specific partition, reasoning that it would scan the hard drive for a boot record.However, when I booted it (with USB boot selected) it simply said "No Operating System found, replace system disk and press en
View 6 Replies
View Related
Nov 16, 2010
I encrypt a partition using LUKS, and store personal data on this partition. Then create a user account that solely deals with this partition and insulated from the Internet. Normally for each boot I do not even need to mount the LUKS encrypted partition, and when I mount that partition under that special user account, I can make sure that the Internet is cut off. I'm going to do the alternate installation these days, could you provide a brief sketch regarding what steps I should go through to implement the above result?
View 2 Replies
View Related
May 3, 2010
im gonna do a fresh install of ubuntu 10.04 and want to make a separate partition for the home folder.
View 3 Replies
View Related
Dec 1, 2010
Is there a way to setup a separate /home partition during a new installation of Ubuntu? If so, how. I've found guides about how to do it after installation, but it seems there ought to be a way to do it that way from the very beginning.
View 6 Replies
View Related
Jan 11, 2010
I want to move my home directory to a separate partition so I can install the new versions of Ubuntu without losing my data. And while I'm at it, what other important directories should I move to separate partitions? And how do I do it? I'm guessing that the /boot directory should also be moved to its own partition too, yes? Because it has the GRUB in it, and if I removed Ubuntu to make way for a newer version of Ubuntu, I'll just get an error because the computer can't find the GRUB that doesn't exist anymore, right? And also, if I move those important yet-to-be-listed directories to their own separate partitions, how large should those partitions be?
I don't want to miss out on the upcoming Lucid Lynx (If it will work in the first place, of course ) By the way, I have an Ubuntu-Windows XP dual-boot system. I'll attach a screenshot of my partition table from GPartEd. You can see that I have about 300 GB. The largest partition is Ubuntu.
View 8 Replies
View Related
May 8, 2010
Many Ubuntu users seem have their /home folder on a separate partition (better security?). I have a OK dual-boot installation (Win7+Ubuntu 10.04) - should I try to move my /home folder ? If so, how ?I DO NOT want to get into any troubles with my existing setup !I have free (unallocated) disk space both outside and inside the extended partition which is used for Ubuntu (90 GB, Ubuntu is 60 GB ext4 + 7 GB swap).
View 1 Replies
View Related
Aug 25, 2010
While installing with a separate /boot partition I cannot get two distinct copies of ubu installed on one machine and be able to choose between them. Each is installed on a different hard drive. x64 versions. I've had this issue both ways:
Stepsinstall mythbuntu
install ubuntu
Result
Two entries in grub. Both cause ubuntu to boot
Stepsinstall ubuntu
install mythbuntu
Result
Two entries in grub. Both cause mythbuntu to boot Grub 2 is so unfriendly for fixing these things. I don't know where to make changes. Ok, Grub 2 is very powerful, maybe it's the lagging documentation, or lack of tutorials that is the problem. But I don't know how to fix this. Do I start over without the /boot partition? Do I bail on ubu?
View 9 Replies
View Related
Nov 14, 2010
I have a 320gb USB hard drive, one partition for my files, one for playing Wii games, and one which I would like to use for an Ubuntu instillation.
To do this, I partitioned my disk accordingly using Windows, then booted from the Ubuntu CD to install the OS to my external hard drive partition. It asked me where I wanted to install the boot loader, so I selected the hard drive itself, rather than the specific partition, reasoning that it would scan the hard drive for a boot record.
However, when I booted it (with USB boot selected) it simply said "No Operating System found, replace system disk and press enter" or something similar.
View 1 Replies
View Related
Feb 7, 2011
I recently put ubuntu on my laptop in hope that most of my games would run through wine, some did and some didn't.
Anyway, long story short, I have ubuntu on my laptop and I want to re install windows onto a separate partition, keeping my ubuntu instillation in tact and set as my deafault OS.
I'm very new to ubuntu and the only guides i've seen are fairly complex. I was just wondering if anyone could point me in the right direction? p.s. Is there maybe a way to create an image of my current ubuntu nstillation/settings/apps etc. just in case I do something wrong and lose everything?
View 9 Replies
View Related
Apr 11, 2011
I haven't been using Ubuntu for a couple of years. Yesterday I decided to fire up my ubuntu box and upgraded from 8.04 to 10.10.
The upgrade went fine, but when I boot it tells me that the /home dir cant be mounted. It allows me to Wait, Skip, or Manually mount it. If I skip I can log in and mount the partition that contains my /home folder so I know that nothing is corrupt. I'm sure my fstab just got overwritten during the upgrade, but, since its been so long, I don't recall how to (correctly) fix it back.
Cliffs:
--Upgraded from 8.04 to 10.10
--/home dir is on a separate partition & is not mounting properly
--How do I set it up so that my /home dir mounts on boot?
I'd just try messing around with fstab myself, but I really don't want to lose any data.
View 6 Replies
View Related
Jul 28, 2009
I am trying to install F10 on my old p3 machine. It has 40GB HDD. I am installing only one OS on this system. So please recommend me partition scheme which will be helpful for home purpose.
Second thing is I don't need default gnome login manager as it takes long time. So please tell me how can I install light weight login manager ( I will be using LXDE as desktop environment ).
View 5 Replies
View Related
Nov 16, 2010
How can I implement this: I encrypt a partition using LUKS, and store personal data on this partition. Then create a user account that solely deals with this partition and insulated from the Internet. Normally for each boot I do not even need to mount the LUKS encrypted partition, and when I mount that partition under that special user account, I can make sure that the Internet is cut off.
I'm going to do the installation these days, could you provide a brief sketch regarding what steps I should go through to implement the above result?
View 4 Replies
View Related
Jan 20, 2010
Compiz settings, my entire GUI would freeze up after the startup splash. It did the little ubuntu jingle and so on but wouldn't actually load up the desktop. I would've booted into recovery mode and deleted the settings that were messing it all up for me, but pressing ESC during grub did nothing! So as a last effort I reinstalled Ubuntu (Karmic) from the live CD on the first partition only, but I don't know how to make the second partition (with my old /home directory) the normal /home directory. The instructions linked above seem to require having done the whole process of moving the partition (so as to create "old" and "new" dirs, etc.).
So there are really two problems here: 1) How does one restore things to normal when a few too many cheeky moves with the desktop effects turns everything to pot? And 2) How does one reinstall Ubuntu with a separate /home partitions
View 5 Replies
View Related
Jul 16, 2010
I will be helping a friend upgrade from 9.04 through to 10.04 LTS, and I am aware that the machine was installed with a separate home partition. I know a clean install is an option however I am tempted by online version upgrades with the thought that any apps they are using will be carried over. Is this a realistic hope? I know that medibuntu for example does not survive a version upgrade.
View 6 Replies
View Related
Sep 19, 2010
I am about to do a clean install of Ubuntu 10.04 and I want to have my /home on a separate ntfs partition so that it can be accessed by windows 7. I know that i can move it after the install but i wold rather not go through all the problems of moving it.
View 5 Replies
View Related
Mar 20, 2011
I've read several accounts of users who upgraded Ubuntu versions and ran into problems. I read that putting /home on a separate partition can make it easier to do upgrades. But it seems to me application versions and even the default applications themselves change so much between Ubuntu releases that I question whether it's a good idea to have all the "OLD" config files and settings that get stored in /home sitting around when running a new Ubuntu release.Does anyone think it's a better idea to just put the whole Ubuntu install (i.e., / and /home) on the same partition? And then when upgrading, backup, and then just fresh install everything (to get the cleanest possible installation)?
View 9 Replies
View Related
May 14, 2010
Recently I tried to install Fedora 12 x86_64 to my laptop. I ran the live fedora image from my cooldisk and then pressed "Install to Hard Drive" from live desktop. Then I went forward until I reached the partitioning section. Though I had ~28GB free space in my Harddrive, but it says: "Could not allocate requested partitions: not enough free space on disks." You can see my steps until reaching this problem in these 3
pics:
step1:
step2:
step3:
I captured these steps by using Fedora 12 Live printscreen tool. I tried to install Fedora12 from its non-bootable DVD too, but no difference! So there's only 2 situations:
1. I did something wrong -> install Fedora and use its partitioning tool.
2. There's a bug in Fedora -> confirm that this is a bug and say me an alternative way to install fedora.
View 3 Replies
View Related
Mar 27, 2010
Noobish question on multibooting multiple Linux distros. I have four of the current major Linux distributions. Each has been installed and run individually (no other Linux distribution installed) in a dual-boot configuration with Windoze. No problem.
What I want to do is install all four Linux distributions and multiboot them. Reading the internet it would seem this is a simple task with GRUB. The short version being - install a Linux distro with a separate /boot partition for GRUB and use GRUB to boot the other Linux distros from the GRUB boot menu.
So I installed one of the Linux distros with a separate partition for /boot. The distro installer installed GRUB in /boot and correctly setup a dual-boot configuration with Windoze. GRUB was installed to the MBR. Next I installed a second Linux distro in its own root partition and told the distros installer NOT to install GRUB to the MBR, but rather, to the boot sector of the root partion of the second Linux distro. Installation was uneventful (and I could access the second Linux partition from the first installed Linux distro, things looked ok). Then I added to following to the installed (MBR - /boot) GRUB's menu.lst:
Code: title lixux distro 2
root (hd0,7)
chainloader +1 After which I rebooted the system and the new entry for the second Linux distro now appears in the GRUB boot menu. I selected the second Linux distro from the boot menu and got the following GRUB error: Error 5 : Partition table invalid or corrupt
[Code]....
View 8 Replies
View Related
Nov 20, 2009
Where can I install grub? I know it can be installed to the mbr of a hard drive. I also know it can be installed to a /boot partition. Can I install it to a lvm partition? Does it have to be /boot? grub-install --root-directory=/boot /dev/hda Does this command install grub to a partition and link it to a separate /boot? I have fedora, but this is a live cd. I need to learn where I can install grub2 to boot
View 3 Replies
View Related
Jun 25, 2010
Looks like I missed defining a /home dir during installation. It's been a while I have a spare partition now that I'd really love to use. Can you specify this still, or is it only allowed during an install?
View 3 Replies
View Related
Nov 27, 2010
So I need to become the root user in order to edit a grub file in a seperate partition, so I can get back into this partition. How can I become and stay as root user in the desktop environment? (I know you shouldn't do this, but I need it.)
View 10 Replies
View Related
Dec 15, 2010
My debian 5 is up and running smoothly and act as file-server in the middle of windows network jungle using samba the only problem is, after backup an external hdd (213 GB) to my /home partition, I end up with message say that I'm running out free space. Fyi my debian installed on 1TB SATA disk, and I separate my /home partition from system what happen to my free space ? here is screenshot of my disk, using disk usage analyzer: is there is a way to get my space back or something missing on my setup.or I have to reinstall my debian and use LVM when partitioning my disk?
View 8 Replies
View Related
Feb 22, 2011
creating a new partition when i have only primary partition on my 40gb harddisk.
what i did while installation was selected use entire partition and now i want a additional partition other than primary ?
I want to assign 10GB for Primary one and wanna create Two 14GB partitions , I Also dont know what Swap partition Is.
Since i am a month old ( January 2011 ! ) UBUNTU user who hates MS Windows now, if i gets this problem solved , i can convince more people to replace their OS to Ubuntu .
View 3 Replies
View Related
Feb 28, 2011
I am new to Linux and was wondering how to make dual booting Windows and Ubuntu from 2 separate drives work. I have dual booted from the same drive but never different ones. If I install Ubuntu on the second drive how will I configure the system to let me choose on start up?
View 3 Replies
View Related
