loading zd1211 linux driver after I booted up into BT4. The only command I figure out is tar zxvfZD1211LnxDrv_2_16_0_0.tar. From here I don't know what to do? Can someone give step by step commands to walk me thru the loading process?
View 1 RepliesHow do I check a process which is over loading the server. I give command Top andthe average load of the server is so high.
How should I kill the over loading process.
I am running Debian Squeeze with icewm as desktop environment. I am trying to start feh automatically when the desktop finishes loading. I have tried crontab -e with @reboot /usr/bin/feh /home/user/photos/ & I think that the best way to do this would be to monitor for the x-session-manag process. The reason I think this would be a good solution is that I killed x-session-manag and it killed my x-session and straight to command line interface.
View 2 Replies View RelatedI am noticing that my GUI is lagging when I log in. But after a while its back to being lightning fast as it should. I am sure its something to do with its loading process.
View 3 Replies View Relatedrecently I've updated my kernel, i had to reconfigure some stuff, in particular, the b43 module is not loading at init process, my question is: what command should I use to load it from the init? or what file should I hagve to edit?
View 1 Replies View RelatedThis doesnt really bother me at all, Im more curious than anything but- When I first installed fedora 9, during startup there was a bootsplash during the boot process. When the kernal was updated, the bootsplash was replaced with scrolling text (I have done several kernal updates, it was after the first one the scrolling text happened). Is there a way of reverting back to the bootsplash or is it more trouble than what its worth?
View 5 Replies View Relatedit stuck after loading. should got login window. instead it show me a blank page and a blinking courser i can only press ctrl+alt+del it will reboot my laptop n stuck after the loading process
View 2 Replies View RelatedOS: CENTOS 5
MOTHERBOARD : ASUS P5G41T-M LX
LAN DRIVER FILE NAME : AR8131_AR8132-linux-v1.0.0.10.tar.gz
How to install the above lan driver ?
I have the driver cd of a frontech pen tablet which is for windows (there are also driver files for mac os in the cd). On Kubuntu, I am trying to use the ndiswrapper -i driver_file.inf command but there are many .inf files on the cd. I am having trouble recognizing which file is the driver file for the pen tablet.
View 13 Replies View RelatedFor some reason I can't seem to get my driver installed on my PC with Nvidia graphics... Only Ubuntu seems to be able to do it and it still doesn't do it correctly..
Heres my hardware
BIOS
Code:
Code:
Code:
Code:
configuration:
memory:
lspci
Code:
On slackware, arch, etc I can't get the driver installed SBOPKG, etc all fail....
They all say it cant find kernel source/modules,etc
I am trying to install a Konica Minolta 2430 DL printer from a computer using the Mepis I believe I'm using 8.5. I would have to restart the computer to find my version and then I would loose this page.
I downloaded magicolor2430DL-1.6.0.tar.gz to /opt and have been trying to install it every since. CUPS will not install the minolta 2430. I am doing this across the internet because that is how my computer club has the printer set up. Through the ethernet. I have pinged and fingered. It can find the address for the printer. That is not my problem. My problem has been library files it couldn't find. Got those. Then jbig. Got that. Now I am getting this print out when I do a ./configure.
root@mepis1:/opt/magicolor2430DL-1.6.0# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
[Code]....
I have just put a fresh version of Ubuntu 10.04 64 bit on my dell laptop, and I'm having a problem connecting to the internet. Before I installed the os, I tryed it out, as they let you do before a complete installation. While testing, I was asked if I wanted to install the proprietary drivers for the broadcom nic. When I did this, I was able to connect to the internet, however, after the install, I can not seem to update the drivers.
Maybe this was automatically done during installation and now there is another problem, but when I try to connect to my network, after I click connect, it disconnects right away and I am entering all the information correctly.
Installed 11.04 after a Series of Harddrive Problems. HD was Cleared so No XP installed, running ubuntu Only. Compaq Presario C500 - Broadcom 4312 Wireless.
View 12 Replies View RelatedI did some research on both Mic and Webcam, but nothing for the mic seems to work, and I can't seem to find decent instructions for installing the spca5xx driver for my webcam. lsusb result for my webcam: Bus 001 Device 002: ID 04fc:0561 Sunplus Technology Co., Ltd Flexcam 100
My mic, on the otherhand, doesn't seem to be nothing too special. It plugs into the back of the computer right next to the speakers. I've searched everywhere for how to fix these, but can't seem to find anything that works. As for my mic, I've tried installing the... linux modules backport, etc... through synaptic, nothing. I've gone through alsamixer, and sound properties. The only thing I can think of, is that the computer isn't reading my mic.
Sorry if this post is kind of scattered, but I've gotten 2 hours of sleep last night, and not able to sleep again, Also, if anyone can point me in a direction of IM services that allow AIM, MSN, and YIM chat support through my friends on the windows OS. I've heard of Skype, but I don't want to seem too demanding to ask them all to download a program just to speak with / see me.
i did yum -y install akmod-nvidia and then type xconfig-nvidia on the terminal,and after logging off i confront with a blank screen,so i remove akomd-nvidia [yum remove akomd-nvidia] and also yum erase xorg-x11-drv-nouveau [yum erase xorg-x11-drv-nouveau]but still no gui,i think i should install:
yum install kmod-nvidia
xorg-x11-drv-nvidia-libs.i686
xorg-x11-drv-nvidia-libs.x86_64 [but i didn't]
so how can i have my gui back?
I was curious as to if there was a way to install a 32bit driver on a 64bit system. I have a dell v515w printer and the only driver they provide for it is a 32bit driver. I was wandering if anyone may know of a way to install it or if anyone knows of any other available drivers. I have searched everywhere for i dont know how long and came up with nothing i have tried installing the 32bit libraries and it didnt help.. and going back a 32bit system is out of the question due to ubuntu not wanting to load.. i think it has something to due with my hard drive being to large... but im using ubuntu 10.10 maverick 64bit...
View 2 Replies View Relatedinstall my atheros 9285 wireless card driver in backtrack 4 in vmware i am pretty new to linux and have been playing with various linux commands to see if i can get more familiar with linux. I have downloaded a linux driver for atheros card but dont seem to be able to install it could some one please advize on where to download the correct driver for my card and how to install it any help will be very much appreciated ps i have been following various guides and downloaded a driver but cant get it into the root directory of linux in vmware or inst airmon-ng comes back with no interface still
View 1 Replies View RelatedI have been having trouble with the install of Ubunto in general. First problem is that my realtek network drivers rtl8168 are giving me some problems. I have followed advice from other threads for disactivating the NIC and disconnecting the power for 10seconds. This works in that Ubunto can recognize the hardware (hardware active), but it says it is not in use. Furthermore, I try to define the IP address manually and it does not allow me to press apply. Therefore I cannot connect to the internet.
I though I would try a fresh install of the latest Ubuntu. I did not have the internet connected (due to drivers). After the partitioning section (I partitioned over Ubunto 9.10), on the screen where it says select Username, computer name etc. some files were loaded, and at the end it says �ready when you are�but I was not able to move forward. I don�t now why. Ultimately I reboot the computer Now I get this message upon booting (I am still booting from USB)
GRUB Loading
error: unknown filesystem
grub rescue
With my limited knowledge about integrating kernel modules into the initrd image. The issues is that currently when we are trying to install the RHEL5.4 image onto a 64 bit box we need to load the megasr driver initially before the ahci driver. Hence we use a seperate diskette for the same. We want to integrate the megasr files into the RHEL image itself.
View 5 Replies View RelatedUbuntu 10.04 not loading. Sticks at GRUB Loading message.
Read the other threads re OS not loading and GRUB. The talk about code goes over my head.
Local techie says the hardware is good. Tried reloading Ubuntu from CD. Tried loading the unmentionable OS.
Tried using Spotmau Powersuite.
I have had to install the B43 diver before to get wireless to work.
View 5 Replies View Relatedi had put my kubuntu to sleep on ram, when i powered up again i lot power, now when i boot into kubuntu i have no networkif i do an ifconfig i don't see eth0 anymorealso sudo ifup eth0 returns an error saying, 'ignoring unknown interface'
View 9 Replies View RelatedI use a RaLink RT3090 Wireless PCIe card. When I installed Slackware, the required driver was not in the Linux kernel, but a Linux driver did exist, so I downloaded, compiled, and installed it.Initially, when typing lspci -v, I got:Kernel driver in use: rt2860Kernel modules: rt2860sta, rt2800pcifor my card. The driver I compiled was named rt3090sta, and if I typed modprobe rt3090sta, it would not load. Eventually, I discovered that to get it to work, I had to type the following commands.
rmmod rt2860sta
rmmod rt2800pci
modprobe rt3090sta
modporbe rt2800pci
And yes, if I do not enter rmmod rt2800pci, and then modprobe rt2800pci at the end, it will not work. I would like to know how to get rt3090sta toload by default instead of rt2860sta. After I've done this, lspci -v gives me: Kernel driver in use: rt2860rnel modules: rt3090sta, rt2860sta, rt2800pci
I have broadcom wireless card in my system. I got the driver from broadcom site. I compiled it against my kernel and the module works fine. How could I automatically load this driver at startup. I followed the instruction found in the driver source README file. But its not working. The steps I followed are as follows:
# load driver
# cp wl.ko /lib/modules/`uname -r`/kernel/drivers/net/wireless
# depmod -a
The same steps I followd in 2.6.26 kernel and it worked fine. Now its not working in my new kernel 2.6.32.For manually loading it I have to remove the ssb driver and the download this one. Otherwise it will not work. So I tried adding ssb to /etc/modprobe.d/blacklistle. But that driver loads during startup. So each time I have to manually unload the ssb driver and insert the new one.
I've been configuring a kickstart installation of Fedora 14, and everything was working fine on a slightly older Dell Precision 490. The machines we're actually going to use, are Dell Precision T7400, and when I tried on thoseit had some issues with the SAS controller, and is unable to see the hard drive in the machine. I get the following error (see attached dmesg output for more details):
Code:
[ 4.616263] sd 8:0:0:0: [sda] Attached SCSI removable disk
[ 22.766118] mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
[code]...
I tried to load a simple driver program. I am using RHEL5. When I tried to compile my 'driver.c' program it shows the following error:
[root@jameslee ~]# gcc -c device.c
device.c:1:25: error: linux/module.h: No such file or directory
device.c: In function 'init_module':
device.c:6: error: 'KERN_INFO' undeclared (first use in this function)
device.c:6: error: (Each undeclared identifier is reported only once
device.c:6: error: for each function it appears in.)
device.c:6: error: expected ')' before string constant
device.c: In function 'cleanup_module':
device.c:12: error: 'KERN_INFO' undeclared (first use in this function)
device.c:12: error: expected ')' before string constant
Recently I bought the next notebook: Asus R510JF-DM020 i7-4720HQ
My hardware (extend ouput):
Code: Select all$ inxi -Fzx
System: Host: Asus-R510JF Kernel: 4.2.0-1-amd64 x86_64 (64 bit gcc: 4.9.3)
Desktop: KDE Plasma 5.4.2 (Qt 5.5.1) Distro: Debian GNU/Linux stretch/sid
Machine: Mobo: ASUSTeK model: X550JF v: 1.0 Bios: American Megatrends v: X550JF.203 date: 04/02/2015
CPU: Quad core Intel Core i7-4720HQ (-HT-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 20751
[Code] ....
I just recently installed a fresh copy of 9.10 server on an older machine I had laying around to use as a router and home server. Everything is setup and I'm on the net on it, except for some reason the Netgear GA311 I'm using for the internal network doesn't seem to be loading a driver. I've tried modprobing 8139 (which it says isn't found) as well as 8139too, 8139 too goes through ok, but it doesn't make any change, with lshw still claiming that it is "unclaimed". It seems that the Realtek chipset this card is based on is extremely compatible with Linux and I'm having trouble finding anyone with a similar issue with it.
View 9 Replies View RelatedI bought a new NVIDIA GeForce 6600GT video card for this PC recently and now whenever I boot Ubuntu 9.10 Live I can't change the screen resolution from 640 X 480. I get this message to the effect that the driver is restricted and not free software. When I try to download it and use it it says I can only activate it after a reboot, but I guess it means after rebooting an installation of Ubuntu, not the live cd since it never takes.
Ubuntu recommends NVIDIA accelerated graphics driver 185, so I went to NVIDIA's web site and downloaded NVIDIA-Linux-x86-185.18.36-pkg1.run (and NVIDIA-Linux-x86-190.53-pkg1.run since I think it's the newest, at least when I enter GeForce 6 Series and Linux 32-bit in the driver download search it's what comes up). I noticed that at the beginning menu of the Ubuntu 9.10 Live cd, when you press F4, the option to load from a driver disk is there. I was hoping this means I could just put one or both of the above files on a cd, insert it into the other disk drive and select that option.
all i want is loading a simple c++ program like hello world with this driver. everything works fine except it doesnt start the program. because ret returns with 0 i think the program works fine but I think i messed up something about how to start the c++ program. i used this example for my program but it doesent work too.
[URL]
is there anybody out there who can give me a hint what i messed up? i use ubuntu with 2.6.32 Kernel.
[Code]....