General :: Install Xp On Vm - Use Ssh Or Vnc To Transfer?
Nov 13, 2010
I copied xp disk to debian computer, now cd is cracked want to put on virtual machine. I built computer with:
AMD PHENOM II 1090T X 6 processor
ASUS MB
10Gigs ram
1Tb sata hd
Os Debian squeeze I actually used 40G pata hd for testing purposes. Anyway I want to install xp on Vm. Do I just use ssh or vnc to transfer? Also when I copied to file I'm not sure if any components are missing. It is a registered copy, I have the key. I would have copied xp hd but it's corrupt.
View 14 Replies
ADVERTISEMENT
Jan 1, 2010
Having a bit of a issue with Debian Squeeze and transferring files to the Sony PSP..Hook up PSP to USB port and Debian mounts it..I go to drag a 125 meg mp4 to video folder..Copy windows takes about 10 seconds to transfer it..Exit USB mode and there is no video there. Go back into USB mode and look at video folder on the PSP memory stick and there is no video..It vanished. From another after copy progress closed I right clicked PSP and unmounted it..
It error-ed saying device was busy and could not unmount..Looking at light on PSP i see memory stick is still being written to..i wait for light to stop flashing..About a minute or so..Then am able to unmount it..Go to PSP video and theres the video ready to be watched. Debian isnt accurately showing the copy progress...Its showing complete when it isnt..I have to watch the light on PSP to know when it is truly finished.
View 3 Replies
View Related
Mar 10, 2010
i am trying to transfer a file from my live linux machine to remote linux machine it is a mail server and single .tar.gz file include all data. but during transfer it stop working. how can i work and trouble shooot the matter. is there any better way then this to transfer huge 14 gb file over network,vpn,wan transfer. the speed is 1mbps,rest of the file it copy it.
rsync -avz --stats bkup_1.tar.gz root@10.1.1.22:/var/opt/bkup
[root@sa1 logs_os_backup]# less remote.log
Wed Mar 10 09:12:01 AST 2010
building file list ... done
bkup_1.tar.gz
deflate on token returned 0 (87164 bytes left)
rsync error: error in rsync protocol data stream (code 12) at token.c(274)
building file list ... done
code....
View 1 Replies
View Related
Dec 10, 2009
I don't have a working DVD burner. I'd like to transfer the FC12 install DVD image to a USB thumb drive, and install from there. Is that reasonably easy to do?ow would I transfer the .iso file for the install image to the USB thumb drive in such a way that I could boot from i
View 1 Replies
View Related
Jan 20, 2010
using Slackware 13.0, and whenever i trasfer my files to USB, like copy or cut and paste, it will show as if file transfered in an instant,like click paste and poof.the whole 1 gig file transferred in one second, and it wont show dialog box of transfer process, and then i have to predict some minutes and wait (till the transfer actually finishes, i have to usually see my USB's transfer indicator light), if i plug out before or my prediction goes wrong, i end up with corrupted files. This aint related to window manager, as same is case for KDE and XFCE tried thunar, konqueror, midnight commander, all of em resulted with same problem.
View 6 Replies
View Related
Sep 29, 2010
I have no idea what to do to copy settings for programs, etc. to a new install of Ubuntu so that I don't have to do it all over again. When 10.10 releases, I would like to upgrade with a fresh install because upgrades sometimes bug out. Which folders do I copy/What is the best method of doing this?
View 9 Replies
View Related
Jul 8, 2011
I have landed myself in a bit of a pickle. Needing to upgrade my system for 11.4 I went ahead and bought a refurbished Compaq. The intention was to merely replace the smaller drive with my existing drive. Only problem is that on opening the Compaq I found a SATA drive. Being a Compaq there is no space for a second drive, so I must copy my existing system via CDROM. As the 11.4 has gone through a number of updates since I installed, I cannot use the original installation CD. Downloading is out of the question for my link speed. I made an automatic backup when installing but am not sure where it is or whether it is also kept up to date. Anyway, does the backup contain merely the system and then require further transfer of home folders, etc? The alternative, of course, is to source locally the latest version that will not require hours of updating.
View 6 Replies
View Related
Jan 30, 2011
I'm using Ubuntu 10.04 and my HDD is failing. Is there a way to simply transfer my old install to a new HDD without having to do a fresh reinstall?
View 8 Replies
View Related
Jul 15, 2010
Is there an easy way to transfer Webserver data from one ubuntu install to a new one? I know I'll need to get the stuff in /var/www and (somehow) the Mysql data, but are there files elsewhere to get? Or is there a better way than trying to copy all the various files?
View 2 Replies
View Related
Jan 18, 2015
I am trying to install Debian over Kali since in order to use steam, newest version of wine and a few other things causes a change reaction that would require about two-thirds of my main os re-written with non kali files which makes me a little uneasy.
I have downloaded the debian-live-7.8.0-i386-gnome-desktop.iso from torrent from the link from debian download listings at debian.org. and I put it on a 8gb flash drive formated with gparted to a bootable fat32 partition and is listed as being /dev/sdc I installed the iso to the drive uss dd using the following code
Code: Select allsudo dd if=debian-live-7.8.0-i386-gnome-desktop.iso of=/dev/sdc bs=4M; sync
now it boots to the flash drive just fine with only the gnome3 drivers loaded by the live os isn't fully functional with my system. Ie. when I log into any of the live modes it gives me a message that it was switched to gnome3 [fallback] I am using the current version of gnome3 desktop manager installed from source on kali with out any trouble.
Also when I click the graphical installer or the installer modes from the grub i get a background image with some sort of artifiacts in the top inchish of the screen then everything but the mouse freezes. But when I go into one of the live modes and click the installer in their it opens just fine but when it starts transferring files it says that it couldn't transfer files from the cd after all the language and localization screens at the beginning.
I did find a misc page on the internet involving a cruchbang with the same problem [URL] I went to the folder in the usb drive in question and it looks like since that was originally post something has changed or it could have been a crunchbang format.
So basically I am asking did I do a step wrong should I try a different way of instillation, or do I have a corrupted image? also I am unable to use disk media due to the type of drives and disks I have access to.
View 4 Replies
View Related
Aug 13, 2011
I am runnig WinXP and OpenSUSE 11.4 on dual boot.Generaly i am using SUSE, XP only for UpNP Media Center(server) to watch movies stored on my computer on TV via STB.For this i am using TVersity for wich i not found yet Linux alternative - or better say - i found it but is too heavy for my PC(P4 1.6 Mhz, 768 MB RAM, an dinosaur from Nvidia Vanta with 64 MB RAM)But this is not a part of my question.My question is how to transfer(copy, move...?) files from SUSE to WinXP?A large files like avi, mkv, mostly movies.I solved this to copy them on USB and then from USB to Win.This is a very slow proces because my PC have only USB 1.0And before asked me - all files are legaly downloaded from paysites.From SUSE, partitions(disks), folders and files under WinXP are visible but is not possible to copy files on them - acces is denied.Is there any way to do this?Suse is insatlled on LVM - /root/home/swapI am interesting ONLY to copy files from SUSE to Win, not at al from Win to SUSE.Code:
Directory: /home/janez
Sun Aug 14 07:53:26 CEST 2011
janez@linux-cia6:~> su - root
[code]...
View 5 Replies
View Related
Aug 17, 2011
I'm new to this system and trying to install plug-ins but I always seem to get some sort of rejection..
[root@localhost haley]# yum install vlc
Loaded plugins: langpacks, presto, refresh-packagekit
[Errno 14] curl#6 - "Couldn't resolve host"
Trying other mirror.
Could not retrieve mirrorlist...^... error was
14: curl#6 - "Couldn't resolve host" .....
Error: Cannot retrieve repository metadata (repomd.xml) for repository: rpmfusion-nonfree. Please verify its path and try again [root@localhost haley]#
So then I checked to see if I had rpmfusion-nonfree, and I do. I really have no idea what to do, I have spent hours trying to get this work. I want to be able to open any media file, avi, wma, mp4, etc.'m using Fedora 15.
View 2 Replies
View Related
Feb 24, 2010
I have tftpd-hpa and dhcp3-server up and running. I just want to install server edition via network, from the host machine (my laptop, running ubuntu 9.10) with an ISO file (ubuntu 8.04 32-bit server edition). I managed to boot the client machine with pxe-netboot technique, but instead downloading all the files from internet, I need to do this process directly from ISO. To transfer ISO from host to client, I also installed Apache. I unpacked ISO file into /var/lib/tftpboot/server/. I created a link to the Apache root: /var/www
Code:
ubuntu@ubuntu:/var/www$ ls
returns => index.html server
server folder is the place where I unpacked the ISO.
My dhcp3-server has this setup and it works well with netboot, but I don't know how to add Apache to the formula to transfer the iso file from host to client. Firewall is disabled. This is my edited /etc/dhcp3/dhcpd.conf file.
Code:
host pxeinstall {
hardware ethernet 00:06:29:DE:E3:CD;
fixed-address 192.168.2.4; (client IP)
next-server 192.168.2.2; (host IP)
filename "/server/install/netboot/pxelinux.0"; (relative to tftpboot)
} subnet 192.168.2.0 netmask 255.255.255.0 {
range 192.168.2.2 192.168.2.5;
option routers 192.168.2.1; }
When I pxe-boot the client, the process comes to a halt when tftp server is trying to access to pxelinux.0 file. I got thls error:
PXE-T00: Permission denied
PXE-E36: Error received from TFTP server
I have no experience with Apache... so I think there is a problem with my IP addresses.. Do I need to use 127.0.1.1 instead of 192.168.2.1 (my routers IP)?
View 3 Replies
View Related
Jul 5, 2011
I have Ubuntu 11.04 installed and running on my laptop and was wondering if there was any way to create an install disc/usb or some other way to install Ubuntu in its current state (including all apps, updates, settings etc.) onto my desktop.
View 6 Replies
View Related
Aug 16, 2010
I have puppy linux on a 512mb usb flash drive. I would like to put all of it onto a different usb flash drive with more memory. I used windows vista and copied all of the files from my first usb to my second but when I tried to boot it did not work.
View 10 Replies
View Related
May 25, 2010
I have a linux server and I have SSH Access to it.
How do I transfer my files to my desktop.
View 1 Replies
View Related
Apr 9, 2011
Machine A holds important source data that needs to be backed up. Machine B is where the data will be backed up to.They're both Ubuntu.I want to have an automated process that allows machine A to create an encrypted tarball and copy it to machine B, without human intervention, but doesn't allow anything except copying the file over to a target directory.I thought about using a chroot jailed account, but this seems to be a pain to set up and overly complex. I really just want to be able to have machine A to copy files to machine B, via automatic cron, but I also want to prevent the mechanism that allows the copy from allowing any other actions (copying to any other directory, logging in, executing any other commands noninteractively, etc.). Also, the transfer must be encrypted (e.g. using ssh somehow).
View 1 Replies
View Related
Sep 21, 2011
I have machine A with a public IP address (addr_a), machine B within a LAN of private IP address(addr_b), the router of the LAN has a public IP address (addr_r).If I log into machine A by ssh from machine B, how can I use the command scp to copy files from machine A to machine B?
View 1 Replies
View Related
Feb 14, 2011
how can we transfer the file from putty session to windows host which resides remotely....
View 1 Replies
View Related
Oct 4, 2009
We are having few computers in ms-dos 6.22 , we want to download file from Dos machine to redhat linux machine.
View 4 Replies
View Related
Feb 9, 2011
without realising I started thunderbird from a root window, I set it up along with rules and about 2 hours finetuning.
I figured out how to get the icon on the top panel, but that is naturally started as my user gsm.
Is there an easy way of migrating the whole mailbox and subfolders form the root install to the gsm user?
Or is it easier to start from scratch?
View 2 Replies
View Related
Jun 14, 2010
I have an old laptop (PIII 800MHz, with 256 RAM) that I wish to use as my home server: it'll have to serve just two people, so I think that I'll be more than ok as for the RAM and the CPU.The issue is about data, because the internal hard disk is a 12GB, that is...ridicolous! I have more than 60GB of mixed storage and counting (images, videos and music) in an external usb hd. I could put the hd in my desktop pc just to serve the big files through ethernet or let it inside its usb box attached to the laptop.
The question is: which of these solutions will be the fastest? USB 1.0 attached to the server (laptop) or internal hard disk serving files via 10/100 ethernet to the laptop on demand?what about your experience? Is the difference based on a human notable scale?
View 3 Replies
View Related
Aug 22, 2011
I want to transfer files (a music folder) between two Linux computers. After searching for the best way to do this, I've seen that there are lots of ways of doing this. I know this has been asked a lot, everywhere and all the time. The main problem with this is that there is no clear, recent consensus on one best way to do this task in 2011 for Linux beginners (even depending on some parameters).
So in the spirit of the Stack Exchange websites, I want this not to be related to my particular situation, but more of a guide to others as well on how to transfer files between two Linux computers over a local network. I think a wiki would be useful for many.
Here's what I found so far:
ssh
sshfs
scp
sftp
nfs
samba
giver
What is the easiest? Most flexible? Simplest? Best solution? What are the pros and cons of each? Are there other (better) options? What are the parameters in choosing the best method (solution might depend on number of files, filesize, easiness vs. flexibility, )?
View 6 Replies
View Related
Sep 6, 2011
I have accounts on two machine: H1 and H2. I created ssh keys on H1 and installed it on S1. I can now ssh to S1 from H1. I want to do the same from H2. How do I install the ssh keys generated on H1 on H2?
View 3 Replies
View Related
Sep 13, 2011
I am transferring a file from a linux pc going to a windows ftp server using "ftp put". My file is a zip file that includes .txt files inside it. Here is what's happening when I transferred this file :I used ftp put for transferring and found that my transferred zip file was corrupted and couldn't be opened on the ftp server.I found the solution for this on the internet. I needed to use 'binary' to make it right.
I transferred again using binary and then ftp put the zip file onto the other end. Yes, it worked. My zip file wasn't corrupted anymore and I could already opened it on the ftp server. But the problem remains on the .txt files inside it. Converting the file into binary made my .txt files to be distorted and unreadable. I read from the internet that .txt files need to use Ascii instead of Binary to be readable, but if I use ascii it would cause my zip file to be corrupted again. I need to successfully transfer a zip file that contains .txt files using ftp put.
View 5 Replies
View Related
Apr 20, 2011
I am trying to transfer a file using tftp between two PC's. I have installed tftp-server, tftp, xinetd on both PC's. I am unable to transfer the file between the two systems. although the self transfer is working on both the system. I am getting the error "Transfer timed out"
cat /etc/xinetd.d/tftp
# default: off
# description: The tftp server serves files using the trivial file transfer
[code]....
View 3 Replies
View Related
Sep 12, 2010
How can I send a job running in one bash instance to another? I tried disowning the job, and resuming it with a "fg %cmd" from another terminal, but that doesn't work.
View 3 Replies
View Related
Aug 6, 2010
Is there possibility to restart stopped job from another terminal? I know this works with screen but is there way how to do without it?
I was trying to achieve it by sending signals with kill:
Code:
kill -s SIGSTOP $PID
kill -s SIGCONT $PID
but this keeps job on the original terminal. (I did the test with top.)
View 6 Replies
View Related
Feb 23, 2010
I have login of two ftp servers and I want to transfer the data from one ftp server to another ftp server. How can I do that, without downloading to local and then upload to other ftp?
View 7 Replies
View Related
Jul 13, 2010
i'm using Fedora 13 with wireless card: Intel 622 ANHMW i'm testing the roaming quility under F13, if i set 3 ap's with same SSID "51g" and different channel "1" "6" "11" I can roaming from ap's when the strength of ap is less than 50%(maybe) but if the strength of ap1 is greater than 70%(maybe) ,
i can't roaming to another ap2 although the laptop just put beside ap2
1. can i set some files that indicate what strength F13 will detect another ap ?
2. when the ap's strength less than a value, it take about 30's or more to detect & transfer from weak ap to strength ap, does that situation normal? or how to speed up the ap's roaming?
View 1 Replies
View Related
