OpenSUSE Install :: Transfer System From IDE To SATA?
Jul 8, 2011
I have landed myself in a bit of a pickle. Needing to upgrade my system for 11.4 I went ahead and bought a refurbished Compaq. The intention was to merely replace the smaller drive with my existing drive. Only problem is that on opening the Compaq I found a SATA drive. Being a Compaq there is no space for a second drive, so I must copy my existing system via CDROM. As the 11.4 has gone through a number of updates since I installed, I cannot use the original installation CD. Downloading is out of the question for my link speed. I made an automatic backup when installing but am not sure where it is or whether it is also kept up to date. Anyway, does the backup contain merely the system and then require further transfer of home folders, etc? The alternative, of course, is to source locally the latest version that will not require hours of updating.
View 6 Replies
ADVERTISEMENT
Jul 4, 2010
My friend bought an old hard drive. He noticed something with the hard drive that it was just replaced with a SATA socket. So meaning, the SATA socket was soldered to the PATA hard disk to replace the PATA socket to SATA socket to make it a SATA.
Now the question is:
1. Does the Transfer Rate of the harddisk (that has been replaced from PATA socket to SATA socket) would be SATA transfer rate? OR would still be PATA transfer rate?
View 4 Replies
View Related
Jul 19, 2010
we have a server running with Suse linux many years. Meanwhile we changed server hardware about 4 times, mostly also updating to newest Suse version. We used to copy group, passwd and shadow to a backup medium, installed the new system and restored those files onto the new system and all was running fine. Now, some weeks ago we installed 11. on new hardware and after restoring those 3 files after rebooting the system hangs when starting GUI. I can boot into runlevel 3 and login with no problem, but when I boot into runlevel 5 mouse and keyboard are frozen. Also when starting GUI from runlevel 3 with startx mouse and keyboard immediately freeze. If I restore the files group, passwd and shadow as they came from fresh new installation I can reboot and login in runlevel 5 without problems.
OK, if I compare the userlist, as it is generated bei installation,there are some usernames I formerly not had in older Suse versions. I don�t know if this can make problems? I tried to edit the files, to combine the system users from 11.2 with the list of local user names from the old system but without success, again the mouse and keyboard freeze.So some questions arise:1) Why now mouse and keyboard freeze in xsystem, when there are changes in the user list (but only in runlevel 5)2) What is the correct way to save and restore users and groups from old to new system. I googled several hours but did not find a smart way. Maybee someon can point me to a link or a howto where I find the solution
View 1 Replies
View Related
Aug 2, 2010
I just finished a build of a new GNU/Linux boxen with openSUSE 11.2. I have a MSI Big Bang Xpower X58 motherboard which has two SATA controller chips, one is the standard Intel ICH10R chip for SATA 3.0 Gb/s and one is the Marvell 9128 chip for SATA 6.0 Gb/s. The BIOS recognizes the Western Digital Caviar Black 6.0 Gb/s drive on either SATA controller chips, /however/ I am unable to install (and boot) when the drive is connected to the Marvell controlled ports. As you can guess, I'd like to boot from the faster interface!
1. The BIOS allows me to select the Western Digital drive as a secondary boot device, so I know, at least at the BIOS level, it's there. This is true whether I have the drive connected to the Intel or Marvell ports. (The DVD drive is the primary boot device.)
2. When trying to install openSUSE 11.2 from DVD, the installer says that it can't find any hard drives on my system when I have the drive connected to the Marvell port. The installer finds the drive fine when it is connected to the Intel port.
3. I installed everything with the drive connected to the Intel port. I switched the drive to the Marvell port afterward and the system refuses to boot completely, stalling at some point where it starts to look for other filesystem partitions. This led me to conclude that perhaps the problem is with openSUSE and not hardware weirdness with the system having two separate SATA controllers?
View 9 Replies
View Related
Jan 25, 2010
Is there a device that would allow me to transfer files from my old IDE hdd to a new SATA hdd? My computer died (motherboard, possibly ram and psu) with my files trapped on my old IDE hdd. I do have a backup on DVD, but it is a little old. Thus, I would like to get the current files on the IDE hdd and either transfer them to a SATA hdd or burn them to DVD.
View 3 Replies
View Related
Mar 26, 2010
I just bought a 1Tb hdd and reformatted to FAT32 it is connected via eSATA to SATA cable.At first I transfered music that initially was getting speeds over 100mb/s (according to nautilus) after about a minute it started to dwindle. Now most files will range somewhere between 8-20mb/s although I've only seen a couple go beyond.i edited hdparm.conf to enable DMAHere is the output of hdparm -Tt for both internal(sda) and external(sdb) hardrives.
Code:
/dev/sda:
Timing cached reads: 14872 MB in 2.00 seconds = 7444.68 MB/sec
Timing buffered disk reads: 372 MB in 3.00 seconds = 123.91 MB/sec[code]....
What is the issue this output leads me to believe that I should be getting the same speed I once got.I'm running Intel Core 2 duo at 3.00, ASUS P5Q (enabled AHCI) and 4gb ram 12gb linux swap. Also Karmic 9.10
View 1 Replies
View Related
Mar 10, 2011
I have a Dell XPS 420 with a 500gb SATA drive on which Windows Vista is installed. I also have an additional hard drive that I wish to install for an Ubuntu installation. Is it possible to create a dual boot system with Windows on the original HD and Ubuntu on the newly installed HD?
Simply put, my computer will have 2 hard drives. The original hard drive has Windows installed. I would like for the second drive to contain the Ubuntu install so that the only thing changed on the original drive is the MBR (I suppose that's how it would work).
View 4 Replies
View Related
Apr 25, 2010
Is it possible to install Linux on an external SATA drive?I have a system dual booting between OpenSuse and Windows XP. I wanted to see what other distros were like so I tried installing Ubuntu to my external SATA drive. After installing, I got an error from GRUB, and I had to recover my MBR.I tried the same thing with Mandriva, and got the same result. Finally, I tried another install of OpenSuse 11.2. The result was that I get a grub error 21. The only result of my efforts to try other distros is a lot of experience recovering my MBR.
View 9 Replies
View Related
Jan 10, 2011
My friend has had an HP Pavilion Slimline for about two years -- recently he suffered a power surge and had to replace his (dsl) modem and harddrive -- he can't find the Vista media that may or may not have come with the PC, so I offered to put opensuse on it for him. I used a dvd I had burned last July with 11.3 on it, and the install went without apparent problems. Then I tried an update, and was greeted with
Code:
Download failed:
File '/repodata/repomd.xml.asc' not found on medium
'http://download.opensuse.org/distribution/11.3/repo/oss/'
History:
- [AbstractCommand.cc:224]
URI=http://download.opensuse.org/distribution/11.3/repo/oss/repodata/repomd.xml.asc
That was bad, as I was unable to update. Then we tried a reboot and things got worse. Immediately after the bios info the message
[CODE]
Error loading operating system.
[/CODE}
appeared and the boot halted. The drive is new, we wrote to it and read from it during the install (I formatted it as ext3), but the box can't seem to find grub on it at boot, or it finds it and doesn't like it. If I reboot with the install DVD in the drive I can get a menu and "repair" (I think that was the choice) which gives me a login prompt, which I can tell "root", at which it responds with a shell prompt, but I don't know what I can do at that point to fix grub, or the SATA driver, or whatever needs fixing.
View 2 Replies
View Related
Jan 15, 2011
I just built a new system which has 4 SATA 3 Drives and 2 SATA 6 drives. The motherboard is an Asus P6X58D Premium which has 2 SATA 6 ports through a Marvel controller.I have Windows 7 loaded on one of those SATA 6 drives and it recognizes and boots fine. My intent was to load openSUSE 11.3 on the other SATA 6 drive all by itself and then use the SATA 3 drives as other file systems. When I go to install, the only drives that the openSUSE installer sees are the 4 SATA 4 drives, the SATA 6 drives do not appear at all. Note that when the system boots from the DVD the load of the Marvel Controller says IDE Passthrough Mode and displays those two drives. So how do I get openSUSE to see those drives so I can install and setup Grub to boot from there. I'm afraid if I install to just the SATA 3 drives, then I'll never get to Windows 7 again (should I ever need it ) without much gyrations. I've also tried booting from gparted-live and it does not see them either.
View 9 Replies
View Related
Apr 13, 2011
I have just installed opensuse 11.4 and the install fails to boot, grub hangs or gives an error.
I have tried installing grub in MBR and root changed every setting I can find and even downloaded a fresh ISO. As a last resort I changed the machines BOIS settings from SATA to emulate ide, booted as expected but a bit slow.
11.2 and 11.3 worked on this machine with no problems. Am i missing something? I also tried an Ubuntu install and this worked fine!
View 9 Replies
View Related
May 18, 2011
I can't install openSuse 11.4 on HD sata 6 Gbps but HD is not detected on installation.
View 3 Replies
View Related
Aug 13, 2010
Can SATA 3 (SATA III) Hard disk be run on motherboard which only supports SATA II, except sacrificing the speed (throughput)?
View 2 Replies
View Related
Dec 19, 2009
Trying to install SUSE on a perfectly working PC that was running Windows. Blew away all the partitions and formated the drives.When trying to install SUSE, Installer will not detect my two hard disks. Tried with version 10.x, 11.1 and 11.2, without success.My Mobo is a XFX GeForce 8209, and my SATA drives are both Seagates (1x120GB, 1x320GB). I've tried different SATA mode selection (i.e. SATA, AHCI, and RAID) without any success either.I've tried to look for SATA controller drivers for my Mobo, to try to load on Installer startup, but failed there too.
View 1 Replies
View Related
Jan 15, 2010
So I installed SUSE 11.1 a few weeks back with two SATA drives andit's been working great. I recently received another SATA drive and wanted to add the space to my /home directory. I installed the drive and then booted up my computer. It goes through BIOS and POST just fine but when I get to GRUB my computer just hangs there. It doesn't throw any errors, it just sits until I hard reboot it. If I disconnect the extra SATA drive and then try to boot again everything starts successfully. I've done a little bit of searchingbut couldn't find much on this problem.pretty new to linux so I could definitely be missing something. Let me know if more details are needed.
View 9 Replies
View Related
Sep 17, 2010
I have a Dell Studio XPS running openSUSE 11.2 with dual mirrored disks (using Dell's SATA controller). Does anyone know how I can set up automatic monitoring of the disks so that I will be informed if either fail? I think smartd might be what I need here. Is that correct? I added:
/dev/sda -a -d sat -m <my email>
/dev/sda -a -d sat -m <my email>
smartd is running, but how do I know that it will report what I need? I also have a client with a Dell PowderEdge SC440 with SAS 5/iR also running openSUSE 11.2. They also require automatic monitoring. There doesn't seem to be a SAS directive for smartd. I notice that the newer release says it does support SAS disk. I upgraded to 5.39. On restart (with DEVICESCAN as the directive) I get the following in /var/log/messages for my SAS RAID disk.
Sep 18 10:47:26 harmony-server smartd[25234]: Device: /dev/sdb, Bad IEC (SMART) mode page, err=4, skip device
I ran:
smartctl -a /dev/sdb
and got the result:
smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (openSUSE RPM)
Copyright (C) 2002-10 by Bruce Allen, smartmontools
Device: Dell VIRTUAL DISK Version: 1028
Device type: disk
Local Time is: Sat Sep 18 11:32:08 2010 JST
Device does not support SMART
Error Counter logging not supported
Device does not support Self Test logging
Is there some other tool/package that does support DELL virtual disks?
View 2 Replies
View Related
May 20, 2010
I recognize the obvious need to back up the contents and follow a certain duty of care before attempting to clone my failing pata 250g HD to a 1 tera byte sata. What problems if any could come up when cloning from a failing pata to a sata HD? I'd like to make the switch to sata for many reasons if possible. It is indicated that the HP d530 sff here supports both types.
View 2 Replies
View Related
Mar 1, 2010
I want to stop using Windows because it sucks so i have downloaded all kind of distibutions from Linux. They give all the same error because it seems Linux has problems with Fakeraid. Now i have running OpenSuse in VmWare 7.0.1 but i want it as the only OS.
The installation goes fine but in the end it gives a Grub error because it cannot create the bootloader. It seems to be a common problem and i have done all the steps that i could find on Google.
I have two raid controllers. One is integrated in the mainboard from Asrock ALiveNF7G-HD720p R5.0 and OpenSuse sees it as a Jmicron controller.I have bought also a EM2001 2 Poorts PCI Controller SATA card with two harddisks in Raid 0 because Linux failed to install on the JMicron. On the EM2001 2 Poorts PCI Controller SATA it also fails with the same error.
I want OpenSuse 11.2 working on Raid 0. I know it must be some simple commands in the terminal through a live cd to correct the bootloader and do it manualy by Linux users but i'm a Windows user.
Can somewhone please tell me the exact steps and commands to install Linux on Raid 0 Fakeraid?
View 4 Replies
View Related
May 1, 2011
I keep getting this error in my log viewer every 2 seconds: Code: ata4: limiting SATA link speed to 1.5 Gbps I have a dual boot SSD and I have run many SMART tests in windows and linux, (using smartmon tools and the disk utility) and the reports are all 100% healthy..... My research shows that this error represents one of the following:
1. Problem with SATA controller
2. Changing BIOS to allow SATA
3. Changing SATA mode to PATA or AHCI
4. Replacing the SATA cable
5. Allowing the SSD to run at SATA II speeds, i.e. 3 Gbps
- Does anyone know how to try number 5, i.e. allowing the SSD to run at SATA II speeds? I am lost here and this problem has caused my machine to crash twice when watching a movie in linux/ ubuntu. (It is worth noting that the crashes have only occurred in linux and I have never had an issue in windows, so it does seem to be a linux setting somewhere, hence why I think it is a "allowing SATA II to run at correct speeds issue")
View 4 Replies
View Related
Aug 13, 2011
I am runnig WinXP and OpenSUSE 11.4 on dual boot.Generaly i am using SUSE, XP only for UpNP Media Center(server) to watch movies stored on my computer on TV via STB.For this i am using TVersity for wich i not found yet Linux alternative - or better say - i found it but is too heavy for my PC(P4 1.6 Mhz, 768 MB RAM, an dinosaur from Nvidia Vanta with 64 MB RAM)But this is not a part of my question.My question is how to transfer(copy, move...?) files from SUSE to WinXP?A large files like avi, mkv, mostly movies.I solved this to copy them on USB and then from USB to Win.This is a very slow proces because my PC have only USB 1.0And before asked me - all files are legaly downloaded from paysites.From SUSE, partitions(disks), folders and files under WinXP are visible but is not possible to copy files on them - acces is denied.Is there any way to do this?Suse is insatlled on LVM - /root/home/swapI am interesting ONLY to copy files from SUSE to Win, not at al from Win to SUSE.Code:
Directory: /home/janez
Sun Aug 14 07:53:26 CEST 2011
janez@linux-cia6:~> su - root
[code]...
View 5 Replies
View Related
Sep 25, 2010
My problem is that I need to move a moderately complex system from an old system to a new system. The old system is a core 2 duo running on an asus p5k-se (p35 chipset) M/B, Nvidia 8500 gt, 3 x sata II hard disks, 1 x sata dvd, 1 x ide hd, 4GB ram. It runs opensuse 11.1 kde 4 as a desktop system + samba server, apache server, database server + other non-opensuse software. In addition some of the opensuse software is not the default 11.1 versions as later versions were required. The nvidia driver is from the nvidia repo. There are several file systems, some under LVM.
The new system will be a core5 760, asus p7p55d-e M/b (p55 chipset), nvidia 240, 3 x sata II HD, 1 x sata dvd, 4GB ram and possibly 1 x ide HD. This M/B also includes USB 3 & sata III. I have no USB 3 devices but this may eventually change. I have no plans for sata III and believe that it may be better to attach any sata III SSD to the sata II bus.
What I would like to do is to move the hard disks from old system to the new system. What I would like to know is, if the system is left at 11.1, is the system likely to work with the new hardware. If the answer is no, if the system was upgraded to 11.3, would the transfer of the hard disks then work? In order to upgrade from 11.1 to 11.3 using the DVD i believe I should get rid of all non-default repos. I assume that I should also get rid of anything that was installed from them, e.g. the nvidia driver and any software versions installed manually outside RPM. Also is there any default 11.1 software that should be removed either before or after the upgrade to 11.3
View 4 Replies
View Related
Apr 22, 2011
I tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).
I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.
Athlon Phenom X4 905e
Nividea G7600 graphic card
Former system installed and running flawlessly: 11.1
View 9 Replies
View Related
Nov 11, 2009
I've a pc running Centos 5.4 with an uniq external hard disk hooked by USB (no internal drive). I'd like to hook it through e-sata to get performance improvment. So I am using a sata->e-sata connector to plug the disk.The disk is well detected by the bios, and Centos begin to boot but when it wants to mount the volume groups I've a kernel panic.VG and LV names are detected, but the system says it can't find them (there is a /dev/root not found error message)If I boot the system through a live cd I can mount and access VG/LV without problem any hint to get the system up and running through sata ?
grub.conf:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
[code]...
View 1 Replies
View Related
May 14, 2011
I have a 3 year old PC with 4 internal SATA ports. My old SATA hard drives, all smaller than 2TB, work fine. If I buy a 3TB SATA hard drive, will it work in Linux? Will Linux with GRUB be able boot from such a hard drive without a BIOS upgrade? With a BIOS upgrade? It's fine for me to upgrade my Linux to the newest kernel.
View 1 Replies
View Related
May 18, 2011
I'm new to openSUSE, this is the first time i try to install openSUSE version 11.4. on my IBM Thinkpad T43 (on which SUSE Linux version 8.0 has been running before without problems). I have downloaded the ISO images and successfully burned the ISO images on a blank DVD. Having placed my openSUSE DVD in the drive and rebooted my laptop I can see the boot screen.
I then select installation with arrow up/down and press enter. Choosing language and keyboard layout works fine, as well as accepting the license agreement. However, when it comes to 'System Probing' the installation stops at 'Search for system files'. The cursor shows a little turning disk but the rest of the screen is blocked.
View 3 Replies
View Related
Aug 30, 2010
I use release 11.2 and this one works very well. I try new release 11.3 and my system crash when I wont to start system on runlevel 5. There is Sempron 2 GHz CPU and nvidia fx550 graphics card. Keyboard PS2 does not responds but mouse on USB work well. When I start "safe" boot option system work well. What I can to do ? What I must change
View 4 Replies
View Related
Feb 14, 2011
My system won't boot unless I have 2 sata drives. It doesn't matter what's on the second one. It even boots if the second "disk" is a powered sata to IDE adapter attached to an unpowered IDE drive.If I don't have the second drive I get this when I try to boot:
Alert! /dev/disk/by-uuid/ ...<your UUID>.... does not exist,I don't see anything that seems odd to me in my /etc/fstab file.
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0[code]....
I've done the whole use a live disk, chroot into my system and reinstall the kernel to no avail. uname -r gives -- 2.6.32-28-generic
View 6 Replies
View Related
Feb 18, 2010
server is :intel 5000p ,2gX4 ram ,cpu 5405 X13 sata sda 500g sata use for system rootfilesystem primate mastersdb 500g sata use for data filesystem second mastersdc 500g sata use for data filesystem second slavebios set use enhance and ide i install centos5.4 x86_64 on sda when i install system on sda, sdb and sdc is offline.after system install sucess ,poweroff and add sdb and sdc when system kernel start report ata0 error or ata1 error. exp XXXX (rydy).but when only add sdb or sdc ,system can startup and use all service ,exp vncserver ,kvm,pptp..
View 2 Replies
View Related
Jun 21, 2010
I installed Ubuntu 10.04, and happened to have an Silicom Images PCXpress card plugged in, and it kindly added the sil_sata module.This is fine for this chip set.I think that my earlier installation of Ubuntu 9.04 used Libata, which does support NCQ and also has good legacy support for the Intel Intel ICH7 chipset I have inside my Sony Vaio SZ notebook. Also, libata also support Silicon Image chipsets as far as I can tell from URL...I wish to remove the Silicom Images SATA modules and replace this with libata and then test the performance between the two device drivers.
View 5 Replies
View Related
Apr 21, 2011
Is there an easy way to add SATA drives to an existing system and have them m automatically at boot?So far I've been able to create a partition and format but they never mount at boot.What do I have to put in fstab so it will work?Also, since RAID doesn't work in Debian, is it possible to make two drives mount at the same folder
View 3 Replies
View Related
