General :: Install Memorex Mem 48u Scanner With No Setup Disc?
Mar 16, 2011I have lost my set up disc for my memorex mem 48u scanner. Keep runing intobrick walls
View 1 Replies
ADVERTISEMENT
General :: How To Setup Network Printer / Copier / Scanner / Fax
Jun 19, 2010I do not have the hardware to do this yet. I simply want advice on what route to take before I make the investment. If I had the money I would simply invest in a wireless combo setup, but I unfortunately do not. I do however have an idea. I am currently stuck with a standalone system that is running XP strictly for the use of magicjack. I was thinking I could hook up this combo machine to that computer and network it in via that. However, would the scanning capability only reside in the hardwired computer or could I do a network scan somehow?
View 2 Replies View RelatedOpenSUSE Install :: 11.3 - Can't Find Grub Without Disc / Boot From Hard Disc
Jan 1, 2011I have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap
sda2 - /
sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
Ubuntu :: Install Files - Stuck On - Please Insert The Disc Labeled - Disc 2
Dec 19, 2010I'm trying to install files and everytime I manage to install from the first disc I succeed. When I get the the second disc I just keep clicking the "OK" button instead of "Cancel" and it keeps neglecting it.
View 1 Replies View RelatedUbuntu :: Canon MX320 Scanner Not Able To Get The XSane Image Scanner To Recognize Scanner?
Jul 11, 2010I just received a Canon Pixma MX320 as a gift.
I am currently running the Ubuntu 10.04 OS
I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.
Unfortunately I am not having the same luck with the scanner.
I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.
Fedora :: Get Scanner Setup In 13?
May 26, 2010I installed Fedora 13 64 bit yesterday and so far so good. Except that it recognized my hp2100 printer scanner but it didn't work until I set up CUPS. I installed HPLIP and it doesn't see the printer even though it works. Now I would like to get the scanner to work, but simple scan doesn't see it. How do I get it to work?
View 2 Replies View RelatedFedora :: Setup Epson V33 Scanner?
Mar 2, 2011I have Just got Fedora up and working and trying to setup my Epson V33 Scanner, I have downloaded the Driver packages from Avasys (http://avasys.jp/eng/linux_driver/) But when I try to install the iscan rpm package it tells me that I need libltdl.so.3, after doing some googling I have managed to find this rpm for Mandriva but I am unsure if installing this on Fedora would cause any problems?[URL].. When I looked on the Avasys site this is available as an rpm (or to be exact libltdl.so.7!)
View 1 Replies View RelatedFedora :: Setup A Printer And A Scanner For Personal Use?
Nov 30, 2009I have Fedora 12 installed on my computer and I'm trying to set up a printer and a scanner for my personal use. The printer is a Canon LBP 3200 and the scanner a Mustek 1200 UB Plus. Both are connected via USB.For the printer i managed to install a driver, but it will still not print. It only ejects blank pages. For the scanner i tried sane, but to no avail.
View 8 Replies View RelatedOpenSUSE :: Use/setup Image-scanner On Network?
Jun 25, 2009I have a printer/scanner/fax that's on the network. i have the printer part set up through cups but how do I set up the scanner? What programs can I use on opensuse to see the scanner?
View 9 Replies View RelatedUbuntu Multimedia :: Error With Memorex 24x External DVD Recorder, Using K3b
Jul 26, 2010I have a Memorex 24x External DVD Recorder model MRX-550LE v1. It plays DVDs and CDs but I can't get it to burn in Ubuntu 10.04 LTS. I have used this at Church to transfer the recording to a DVD, with Ubuntu 8.4 LTS. I have attached the debug report from K3b.
Ubuntu Networking :: MFC 495CW Wireless Scanner Setup?
Sep 22, 2010I use 9.10 on a Lenovo t410 and have installed a Brother MFC 495CW. I've been able to get the wireless printer operational, but have only been able to get the scanner operational via a USB cable. I've tried the instructions on the Brother Linux page but to no avail.
View 2 Replies View RelatedGeneral :: Install Printer And Scanner On Centos 5.4?
Nov 29, 2010how can i install printer and scanner on centos 5.4
View 1 Replies View RelatedGeneral :: How To Add Add Any Particular Software In Kubuntu Install Disc?
Sep 20, 2010I know my question is quite essential and some how very abc but i really need your help. I'm just a newbie for Linux.
My problem are:
Hardware: Laptop 6735b from HP
Source of problem: ATI graphic driver not installed
Problem:
1. Freeze Operating system when power unplug (in Gnome)
2. Can not start any Operating system with full or just part of KDE (Kubuntu, Linux mint). Thus i have to stuck with pure Gnome like Ubuntu. ==> install Ubuntu ==> install ATI graphic driver ==> install KDE ==> swap to Kubuntu in Ubuntu.
I tried a lot of OS and none will work. I think the only way for me is create a install version of Kubuntu with ATI driver already build in so at least i can start my OS.Thus could somebody feel free guide me in step by step to build a install disc for Kubuntu. All i need is add up in setup process ATI driver install.
Ubuntu Networking :: WiFi Setup (STA Only Works From Disc In Demo)
Mar 30, 2010I have installed and un-installed 3 different versions of Ubuntu. My fourth is a re-install of v9.10. During all these installs I have had difficulty getting my wifi to work. During my last install I left the ISO in the drive by mistake so when the system rebooted it loaded from the disc in demo.... This was interesting because in the demo the program manager showed 2 drives for wireless, 1 Broadcom STA and 2 Broadcom b43xx. I tried loading the STA and it worked! (sorry it could have been the b43xx, for the time being it's insignificant) Upon my excitement I restarted the computer and removed the disk went to my Ubuntu set up and ...what the Broadcom choices weren't there Why?
Now I am running Win 7 Home 32bit on my main drive and have Ubuntu loaded on its own drive. I have a Netgear WN311b wireless N card installed. Again my confusion is why it worked in demo (off the cd) but doesn't from full install. I read on the web to try inserting my supplied disc from Netgear and then search program manager. It now showed the two for-mentioned Broadcom programs, but this time wouldn't install them. On the b43 I got an error message and on the STA it searched extracting and loading this continued for a 1/2 hour with no progression. I couldn't close the PM or the extracting and loading box, so I had to restart the computer.
General :: Successfully Boot And Install Centos If Download 3rd Disc From Net?
Aug 13, 2010if i download 3 disc from here [URL] will i be able to sucessfuly boot and install centos?
View 11 Replies View RelatedGeneral :: Screen Goes Black And Install Disc Stop Running
Feb 26, 2011I am new to Linux but wanted to try it. I downloaded Ubuntu and burned the ISO to disc, I restarted my PC and the disc runs and seems to be loading, a purple screen appears with a small icon at the bottom, then the screen turns black and that is all, disc stops running and nothing else, am i doing something wrong here?
View 2 Replies View RelatedHardware :: Scanner Not Recognized In Ubuntu Epson Stylus NX510 Printer/scanner?
Aug 15, 2010I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.
View 7 Replies View RelatedUbuntu :: Canon FB 630P Scanner Driver / Can't Get System To Recognise The Scanner?
Dec 14, 2010How to get this scanner to work with Ubuntu 10.10
It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.
I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.
Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...
Hardware :: Using Iscan By Epson CX9300F - Could Not Send Command To Scanner - Check Scanner's Status
Mar 17, 2010After downloading and installing iscan and run it i see this message:
Could not send command to scanner. Check scanner's status.
After command sane-find-scanner:
And this message is result of scanimage command:
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
Hardware :: Getting Canon 8800F Scanner Working / No Other Scanner Found?
Sep 23, 2010Recently got a Canon Canoscan 8800F after looking it up on the SANE site and said it was completely supported for Linux.
I have downloaded the pixma drivers and have compiled the command line program, but it can't find the scanner.
lsusb returns a Canon scanner Bus 001 Device 005: ID 04a9:1901 Canon, Inc.
and sane-find-scanner returns:found USB scanner (vendor=0x04a9 [Canon], product=0x1901 [CanoScan]) at libusb:001:005
but scanimage -L (under my user login or sudo) returns only the webcam. No other scanner found.
My system is running Linux Mint 7, ia64 kernel 2.6.28-11-generic
Ubuntu Installation :: Device Busy Using Image Scan - Reports Could Not Send Command To Scanner Check The Scanner Status
Apr 9, 2010Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports
'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..
Ubuntu :: XSane Image Scanner Won't Recognize Scanner?
Sep 7, 2010I've installed XSane Image Scanner. When I first opened it, it searched for my scanner and didn't give any error messages, and it had my scanner model in the heading of the scan window. But when I hit the scan button, it gave me saying, "Failed to start scanner: error during device I/O.I closed everything, and opened XSane again. This time it said there was no scanner available. The scanner is plugged into the USB port and uses that for both power and data. It's a Canoscan Model N650U.
View 9 Replies View RelatedUbuntu :: Unable Multisessions When Burning Disc Or Import A Disc Which Has A Multisession?
Mar 10, 2010this blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
Fedora :: USB Disc - Access To USB Disc From Text Mode?
Dec 6, 2009I'm sorry for this stupid question, but I have nowhere found it.I need to access to my USB disc from text mode (In Fedora LiveCD I see it and i can access /media/New Volume). In F12 runlevel 3 in mc I see it in /dev/disc/by-label as @Newx20Volume. But I don't know what is the correct path.
View 2 Replies View RelatedDebian Hardware :: Scanner HP M1319f MFP / Cant Use The Scanner?
Oct 22, 2010my scanner used to work in lenny, now im using squeeze fresh install.
i intall hplip with synaptic in order to setup my scanner, printer is working, i dont need the fax, but the scanner is not working with xsane.
normal user and sudo see the scanner with
$ scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
$ sudo scanimage -L
device `hpaio:/usb/HP_LaserJet_M1319f_MFP?serial=N830003' is a Hewlett-Packard HP_LaserJet_M1319f_MFP all-in-one
code....
i know my user is in group lp and scanner root cant use the scannner either.
Ubuntu Installation :: Re-install Grub2 After New Win7 Install To New Disc?
Apr 18, 2011I have been running ONLY linux (ubuntu) on my computer for years now. However, a friend sucked me back into the world of MMO's (angry fist @ RIFT). So, I decided to pick up a new disc, slap windows 7 on it and now want to dual boot.Basically I had to do some disc juggling to get windows to play nice. So my windows drive is now first, then my Ubuntu drive second.Its been a while so I'm wondering how involved / what would be the steps to get grub2 to chainload into windows7 (in my head I want to say I'm going to boot into the live cd, mount the windows disc and reinstall the loader to the windows drive since its the first disc in the chain?)
View 1 Replies View RelatedFedora :: How To Install Canon Scanner
Mar 16, 2010I have a Canon Lide 100 flatbed scanner, however xsane 0.997 can't detect it.Just wanna ask you you guys add a scanner ?When I do a command line, this is what I get.Quote:[root@localhost]# sane-find-scannerfound USB scanner (vendor=0x04a9 [Canon], product=0x1904 [CanoScan], chip=GL843) at libusb:001:003However when I run the "Scanner Tool" from Application --> Graphics --> Scanner Tool
View 7 Replies View RelatedUbuntu :: Install 10.10 Or 11.04 From Disc?
Apr 22, 2011I had Ubuntu 10.10, upgraded to 11.04 beta, didn't like Unity and tried installing gnome 3 with directions online. Killed my ubuntu install. So I loaded Mint and thought maybe I would like that better. Decided to go back to Ubuntu, but keep having bootloader problems at the end of the install. I can still install Kubuntu or Mint whenever I want, but try to install Ubuntu 10.10 or 11.04 from disc and same bootloader problem.
View 7 Replies View RelatedUbuntu Multimedia :: Can't Install From Disc?
Jul 26, 2010I'm trying to install my camera software through cd/rom. When clicking install.exe i get the following error.
Archive: /media/CanonDC300W/setup.exe
[/media/CanonDC300W/setup.exe]
End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. zipinfo: cannot find zipfile directory in one of /media/CanonDC300W/setup.exe or /media/CanonDC300W/setup.exe.zip, and cannot find /media/CanonDC300W/setup.exe.ZIP, period.
Ubuntu :: 10.04 Disc Just Hangs On Install?
Oct 20, 2010I am using a bought 10.04 disc that I have used only twice with success on other computers to duel boot with Win7 on a new Toshiba laptop but it goes so far and then just hangs. It has gone as far as 93% and then stops so what can be wrong.
View 6 Replies View Related