I had Ubuntu 10.10, upgraded to 11.04 beta, didn't like Unity and tried installing gnome 3 with directions online. Killed my ubuntu install. So I loaded Mint and thought maybe I would like that better. Decided to go back to Ubuntu, but keep having bootloader problems at the end of the install. I can still install Kubuntu or Mint whenever I want, but try to install Ubuntu 10.10 or 11.04 from disc and same bootloader problem.
View 7 Replies
I'm trying to install files and everytime I manage to install from the first disc I succeed. When I get the the second disc I just keep clicking the "OK" button instead of "Cancel" and it keeps neglecting it.
View 1 Replies View RelatedI have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap
sda2 - /
sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
this blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
I have been running ONLY linux (ubuntu) on my computer for years now. However, a friend sucked me back into the world of MMO's (angry fist @ RIFT). So, I decided to pick up a new disc, slap windows 7 on it and now want to dual boot.Basically I had to do some disc juggling to get windows to play nice. So my windows drive is now first, then my Ubuntu drive second.Its been a while so I'm wondering how involved / what would be the steps to get grub2 to chainload into windows7 (in my head I want to say I'm going to boot into the live cd, mount the windows disc and reinstall the loader to the windows drive since its the first disc in the chain?)
View 1 Replies View RelatedI'm sorry for this stupid question, but I have nowhere found it.I need to access to my USB disc from text mode (In Fedora LiveCD I see it and i can access /media/New Volume). In F12 runlevel 3 in mc I see it in /dev/disc/by-label as @Newx20Volume. But I don't know what is the correct path.
View 2 Replies View RelatedI'm trying to install my camera software through cd/rom. When clicking install.exe i get the following error.
Archive: /media/CanonDC300W/setup.exe
[/media/CanonDC300W/setup.exe]
End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. zipinfo: cannot find zipfile directory in one of /media/CanonDC300W/setup.exe or /media/CanonDC300W/setup.exe.zip, and cannot find /media/CanonDC300W/setup.exe.ZIP, period.
I am using a bought 10.04 disc that I have used only twice with success on other computers to duel boot with Win7 on a new Toshiba laptop but it goes so far and then just hangs. It has gone as far as 93% and then stops so what can be wrong.
View 6 Replies View RelatedI'm a complete novice who installed ubuntu 10.10 this morning, which seemed like it worked great until I noticed that I had to connect to the wireless network manually each time I re-started etc. I did some research into this and found that if you disable the network manager via the terminal section by replacing certain lines with 'deny' instead of accept or something. I did this however the nm was unable to connect anymore! I've been tearing my hair out searching the net, and this forum for a solution but to no avail. Ive since removed network manager while trying one (of many) ways I found online, so need to install it once more. I even tried to install the whole os again from the disc that I did so with initially, but it doesn't work either!Ill be more than happy to connect every time I turn on if it means I can access the net once more!
View 1 Replies View RelatedIs it possible/easy to create my own install disc based on the install that I have now? I just got finished setting up ubuntu on a new computer and I want to make an install disc that has everything that I have set up ALREADY set up right after installation.
View 2 Replies View RelatedAfter happily running a persistent install from a USB stick for a week I decided to delete my Windows install and replace with Ubuntu.I did the install from the USB stick, selecting the option to use the whole drive.When the install finished I was prompted to restart. I removed the USB stick and did so. The machine rebooted... and nothing. Just a flashing cursor top left of a black screen.I've booted the USB stick version and looked at the hard drive. Stuff has been installed sure enough, but it will not boot.Machine is Acer Aspire 5920 laptop. Running Ubuntu from USB stick has been smooth as silk with no issues.I'm not technically minded, so I'm afraid that any assistance (for which I would be eternally grateful) may need to be n00b-style dumbed-down.
View 1 Replies View RelatedThe problem is as follows: I recently had a power outage whilst my computer was running windows. When I tried to restart the computer I received UNMOUNTABLE_BOOT on the classic blue screen of disobedience. To resolve this I've booted a live ubuntu disc (10.04 LTS), of course when I created an ext4 partition and then tried to install linux I received "error while copying files" around the 65% point of the install which has ultimately told me to create another cd, which since without a working OS I can't do.
With the above filaure in mind I looking into fsck, fsck.ntfs and testdisk both fsck couldn't access the partition and fsck.ntfs suggested I run chkdsk (which I thought fsck was the linux equivalent of).So I figure the next logical step is to try and install linux from the terminal of the cd-based instance of linux I'm running just now from a freshly downloaded iso.
I DLed 10.10 iso and burned it to cd. When I try to boot with cd, it starts up fine, I get the Ubuntu logo with rolling dots, but after a few mins it freezes (with logo still on screen). I have been running Ubuntu on this comp for years
View 9 Replies View RelatedI want to reinstall lucid for various reasons, so I downloaded the file, burnt it to cd and then booted with the cd in. An ubuntu screen started then went to a black screen with the message:(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/output errorCan not mount /dev/loop0(1cdrom/casper/filesystem.squashfs) on //filesystem.squashfsthen no further progress.
View 5 Replies View RelatedI have a question that I can't find anything about online. I have spent the last few months creating and customizing a Kubuntu OS for my company and we want to install it on roughly 45 computers (all different models). Is there a way to save my creation to a cd so it can be installed on another computer?
I know about creating an image of the HDD but what I want to do is create what you would get in the store from Microsoft. A complete OS on a CD, ready to install with all of my configuration changes already setup.
So I have been messing around with the new 10.04 and I managed to screw it up. When I started to log off, I closed the lid to my laptop so it would hibernate, but instead the screen went black and I could only see the cursor. It stayed like that for several minutes so I shut it down manually. When I booted it up again, it froze on the splash/loading screen and I haven't been able to boot it since. I've tried to boot in recovery mode, but I think my campus internet interferes with the downloading of the necessary files from the internet. Is there any way to boot a recovery mode from the install disc? Or am I SOL?
View 6 Replies View RelatedAfter troubleshooting the lockup problem on my installation of Lucid, I want to wipe the thing and reinstall. I have an integrated Broadcom wireless chipset that I want to integrate the firmware into the new Lucid install disc, along with Nvidia's 180.06 drivers for my GeForce4 440 Go (yes, it's an old machine). I need to build this from XP though, since my current Lucid install is to the point of unusable.
Is there any good way to do that? With XP builds you can use nLite to slipstream just about anything into a clean XP install, including all available hotfixes, extra drivers and a few applications. Is there a similar program for building Ubuntu installs that can do that as well? Also, if I download a new ISO of Lucid to build from, will it have all the current updates integrated, or it be up to me to do it? Edit: just realized I posted this under the wrong topic.
I did a full install of Ubuntu on my MacBook Pro (7,1) and I am trying to boot into the OS X disc but the screen always pulls up the Apple logo and loading circle and then greys out and tells me to turn the machine off.
I cannot get into disc utility or anything. It almost seems like the computer doesn't know how to handle the disc. I did not use Refit and the only change I made to the boot loader was blessing the ubuntu partition.
I am trying to install Ubuntu 10.04 into an existing partition. The other partition contains some backups.
When I get to step 5, the system freezes on the message that no root file system is defined. Correct this from the partitioning menu.
I have tried the options, but except for allowing the installation to take over the whole disc, erasing my backups, there does not seem to be an alternative way forward.
The following partitions are shown:
sda1 (fat16) 33,7 MB
sda6 (fat16) 26,2 GB
sda5 (ntfs) 53,8 GB
My backups are on sda5 and I am trying to install Ubuntu on sda6.
I have AMD athlon 64 processor, Seagate 160GB SATA Hard Disk, ASUS A8VMX mother board.With this configuration, I can Install FC7 without any error. But all the latest releases after FC7 is not detecting my Hard disk. Is there any solution to solve this problem? Actually I'm searching for a solution when the FC8 released. Now I have all the later releases from FC8 to FC11 DVD except FC9. But none is working .
View 1 Replies View RelatedI am trying to install debian on a compaq presario 6000. When I try to boot off of the first dvd it just won't do anyting most of the time; one flat line keeps blinking. The first time that I booted it, there was that line that starts with isolinux, but that was only there the first time. now nothing shows up.That first time, I got several error messages: EDD: error 8000 reading sector 1360652 and the same thing 5 times over with different numbers at the end. Do these mean that the disc is corrupt in some way, or that the dvd reader is broken or something else?
View 14 Replies View RelatedThis is my first time to use Debian. I ordered the discs from LinuxCD - Debian 5.0.7. I am at the install point of Software Selection packages and I don't want to install unnecessary ones. Desktop environment and Standard system are ticked by default. I am installing to a desktop machine. I don't think I need Web server and going to Apache's FAQ still didn't answer my question whether I need it or not. I am not sure about DNS server, either. At this point, the only one I am sure I need is the Printer server. I found one page that loosely describes these software collections, but I am still unsure. Since most people do not use dial up these days it isn't taken into account of the description.
View 2 Replies View RelatedIve opensuse and windows on my laptop. I hardly use windows anymore but I would like to keep it. Im getting warning messages saying that I only have about 75 MB left on linux. Windows has lots of space available (especially the "d" partition which I use for storing stuff in like music and video) but I do not know how to "claim" that partition for for Suse.
View 9 Replies View RelatedI know my question is quite essential and some how very abc but i really need your help. I'm just a newbie for Linux.
My problem are:
Hardware: Laptop 6735b from HP
Source of problem: ATI graphic driver not installed
Problem:
1. Freeze Operating system when power unplug (in Gnome)
2. Can not start any Operating system with full or just part of KDE (Kubuntu, Linux mint). Thus i have to stuck with pure Gnome like Ubuntu. ==> install Ubuntu ==> install ATI graphic driver ==> install KDE ==> swap to Kubuntu in Ubuntu.
I tried a lot of OS and none will work. I think the only way for me is create a install version of Kubuntu with ATI driver already build in so at least i can start my OS.Thus could somebody feel free guide me in step by step to build a install disc for Kubuntu. All i need is add up in setup process ATI driver install.
With the 5.3 CDS I started an install got through to 98% of CD 3 but I was called away. Came back this morning and the box was on, but had frozen. Every time I reboot, cold boot, I come up with black screen. Vers 0.97 <grub> Minimal BASH-like line editing is supported. TAB etc. Is there a way I can get to CD 4 and continue the install, or am I back to the top again?
View 1 Replies View RelatedI've never tried installing any other operating system on my desktop so I'm not sure if it's a 9.10 bug (probably not), but whenever I choose any of the options after the ubuntu cd has been loaded at startup it goes to a black screen with the underscore at the top, and promptly reboots. At this point in time I can just boot back into windows or get to the same selection screen off of the cd.I've tried burning 3 seperate cd's and at the moment and trying to boot them on my laptop (but not working... hrm). I'm thinking about redownloading the iso in a couple minutes.
View 2 Replies View RelatedSo, my disc was out dated, so my friend let me use his, because it has TBC on it, and he also let me borrow lich king. I can't install The Burning Crusades, or even the original WoW from the battle chest disc. I get the error in the image.
View 5 Replies View RelatedI have Ubuntu 11.04 installed and running on my laptop and was wondering if there was any way to create an install disc/usb or some other way to install Ubuntu in its current state (including all apps, updates, settings etc.) onto my desktop.
View 6 Replies View RelatedI386 install dvd, gets to the point where it needs to resolve packages and then anaconda crashes. http://jaojbre.users.sbb.rs/anacdump.txt contains detailed log file. Any idea?
View 1 Replies View RelatedIs this irrelevant if you are using the kde install disc? I want to use a encrypted filesystem. I would think since I am using kde that I would have a graphical interface.
View 10 Replies View Related
