I have no FD or DVD-Drive. But I do have a extra laptop HD with nothing on it. Can I install from the laptop HD to another HD? btw I am currently running windows on this HD.
View 4 Replies
i have a small compaq mini (with xp)which i would like to use as my linux education shuttle is there a way to install without cd
View 6 Replies View Relatedim trying to install ubuntu 11.4 onto an xp laptop with 3 partitions, c, d, e and i would like the 11.4 on the d partition but i get to the point where it says the partitioning thing but cant figure how to place it in the (d) ,
View 4 Replies View RelatedI'm trying to get any Linux on my Compaq LTE 5200. The problem is that it dose not have a floppy, and will not boot from CD or Network. The distros I'm working with; Damn Small Linux, DSL-Not, Spri, Puppy, Xubuntu, Lubuntu, Ubuntu -mini, U-Lite, Watt, Crunch Bang (Lite), or DeLi.
I have a few other laptops that I can work with the HDD, and USB-HDD dongle. However, whenever I put the HDD back into the LTE 5200, I get all sorts of errors LiLo 99, GRUB 17, 2, 18.
How can I install on system {A}, to work on {B}? Is there a way to dd if=bootdisk.img of=/dev/hda1 so that it will boot? Other ideas? P.S. Not quite a "n00b", but did not know where to place this question.
I have a Hewlett Packard Pavilion dv5-1125nr laptop containing factory loaded Windows Vista. I have a lot of hard disk space on it and I wanna install Linux. But I don't know which version/distribution will work on this laptop.
View 4 Replies View RelatedI have a linux server in a remote location. I have access to it only via putty. How do I install GUI on the linux server and view the GUI on my windows laptop?I installed KDE and when I type startx I get errors.
View 3 Replies View RelatedI though I would be able to buy an Inspirion notebook form the USA.I had a long chat with DELL support in the USA who told me more or less that DELL has exhausted its supplies of Inspirion with Ubuntu... I was surprised. I spoke to the DELL supervisor who repeated more or less DELL was not working anymore with Ubuntu 12 April 2011 ...sad to hear that
Now I am looking for a Laptop like ASUS and may be a EEE PC. I need some addresses or link. I don't like the EEE PC coming with W7. Is there any other retailers selling the EEE PC without W7? I would like a Asus laptop but which one? same thing still with W7? Any solution for this problem in Australia to find a laptop with CD rom and wifi. I intend to do W-driving with Wifi laptop..
1.Can I install Suse Linux and RHEL 5 on same system (Laptop)?
How many OS can I install in one laptop?
My laptop name in Compaq Presario CQ42-462TU i5 M460 2.53GHz 3GB RAM 320GB Hard Disk
2. Can I install 64bit RHEL 6 and 32 bit RHEL 5.5 on same laptop?
I have RHEL 6 installed on my laptop, but when I try to install Suse Linux after hitting installtion button it starts loading lernel but then it blacks out and stays there for years.
It also shows some ACPI error when I tried to install second LINUX OS .
3.What should I do? Should I change my newly brought laptop?
I have just started with linux and have installed slackware 13 on my laptop - a Compaq Armarda. I need to install a wireless card and have a d-link dwa 125 usb adaptor. How do I install it?
View 6 Replies View RelatedExplain me in detail step by step procedure to install ubuntu latest version in laptop.
View 4 Replies View RelatedI have Fedora 14 on my old desktop,Thats it no other OS. Is there a way i can downlosd packages to usb on my vista laptop then install to my dasktop. you know things like mplayer and all the codes.
View 2 Replies View RelatedI'm trying to install Fedora 14 on my netbook using a network PXE server on my laptop. I can see in the syslog, that initrd.img and vmlinuz get sent over tftp. The problem seems to be in my kernel parameters:
LABEL fedora14-EFI-boot-i386
kernel /images/fedora14-EFI-boot-i386/vmlinuz0
MENU LABEL fedora14-EFI-boot-i386
append initrd=/images/fedora14-EFI-boot-i386/initrd0.img ksdevice=bootif lang= kssendmac text ks=http://192.168.2.1/cblr/svc/op/ks/profile/fedora14-EFI-boot-i386 selinux=0
ipappend 2
On booting up the netbook it can't find a root device. I'm not sure what to specify for the root= because I have deleted all the partitions on /dev/sda. I did this because originally it kept booting up the old OS, and I assumed there was a way to format the disk as part of the install. I'm stuck now and was hoping someone with more experience of bootloaders might be able to help. If possible I'd like to do this using the network rather than a usb.
i am trying to install imageos on my old laptop buti can not figure out the password. i have tried a ton of them,
View 1 Replies View RelatedI can't get WLAN or wireless drivers for my hp pavilon v5000 notebook
View 3 Replies View RelatedI have sony vaio laptop which is vista preloaded. But I don't want windows vista and want to install ubuntu and windows xp on complete hard disk. Can I remove window vista completely? Will be any problem in future if I remove vista completely? And at last, is my laptop hardware vista completable and may give problem? I urgently want ubuntu and don't want virtual os as ubuntu...
View 2 Replies View RelatedI am installing Ubuntu Server 10.10 on and old Dell Laptop. The network connection is an Xircom PCMCIA card.During install, the computer sees and interacts via the network just fine. For example, I can ping the gateway. Also, the command "lspcmcia" works and show the Xircom card.When I reboot, however, there is no network access, and the "lspcmcia" command is not there. When I try "lspcmcia" the OS helpfully tells me that I can "apt-get" pcmciautils, but, without network access, that fails.I tried adding the install cdrom to apt using "apt-cdrom" and then tried to "apt-get" pcmciautils and it got further, installing some dependencies, but acted like it still was unable to locate the pcmciautils package.
View 1 Replies View RelatedI am using an HCL k38 pdc laptop and I am unable to boot KDE live cd of opensuse 11.4. The system boots to a graphical screen where a progress bar is shown. the progress bar proceeds to about 90% and then my system hangs. ALl I can see on my screen is that graphical image with suse logo and progress bar. Though my mouse works and I can move it all around the desktop but if I try pressing any key (CAPS/NUM LOCK/SCROLL LOCK) i dont see any LED notification for that. this concludes that the system is hanged.
Key board has no issue as I can use it in Windows.
I tried to boot the lice cd in text mode and it worked very fine from there I installed the system on to my HDD in dual boot mode with windows XP. But after installation when I boot opensuse from HDD it stucks at the same position.
I think this issue is with Nvidea graphics card as when the system boots I see an error message that says that the RAM has an address conflict with VGA ROM.
How can I use opensuse. I have even tried ubuntu 10.10 but it also hangs while booting or after booting. So far I have been able to manage only Sabayon Linux working on this machine however the ubuntu 9.10 was working on this system and it also started behaving similarly after I upgraded it to ubuntu 10.04.
I downloaded the 6.06 version of xubuntu because i have a laptop that doesnt support high graphics mode, and i wasnt able to figure out how to get it to run in low graphics mode. i figured that i would get a version from a while back, and then update it up to the current version. now, to the problem. I was able to upgrade 6.10, but now it says Ubuntu version 8.04 available, so i tried to update it. it gets most of the way through the part where it says calculating or something like that, and then it says: "Can't install 'xubuntu-desktop' It was impossible to install a required package. Please report this as a bug." with an option that says close at the bottom. when i click close another window pops up that says: Could not calculate the upgrade A unresolvable problem occurred while calculating the upgrade. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bugreport. Then the window just closes... anything that i could do to get rid of this problem? EDIT: Is there any way to update directly from an .iso file on the desktop?
For starters, I have a Dell E1505/6400.I had Win XP but it crashed my hard drive, so I installed Ubuntu. After that install, I decided I wanted to change to OpenSuse, so I downloaded the 4.6 Gig .iso file. Downloaded fine, and I burned in ImgBurn...no problems with it. So I popped the DVD into my laptop, hit F12 so I could boot from DVD drive, but the DVD isn't recognized. It goes straight into Ubuntu, and when Ubuntu starts up, it shows up as a blank DVD+R. (That was the 2nd time I burned it, the 1st DVD I burned had the same results.)
View 5 Replies View Relatedhow to install ubuntu 10.04 on my laptop but im a little caught up between using the wubi or full install heres my dilemma.I like the wubi but it doesn't support hibernation and from doing some reading it is not as stable and has some loss in performance.
The main issue I have with doing the full install is I'm a little concerned that making new partitions may screw up the recovery partition which I find really useful which lets me easily reformat my laptop without having to deal with all the drivers.So my real question here is twofold. Is there a way to still hibernate in wubi? And is the full install that much more stable and faster?Second should the recovery partition be ok if i later decide to start fresh again in the future?
I want to install Fedora 64 bit to my laptop which has Win xp 32. Now I want to install a virtual machine on it.
What I need is what kind of software to be selected(Fedora and VM)?
I want to install CentOS on my laptop which version, whether live CD or USB boot is feasible.
My Current System Information is as follows.
OS: Windows 7 Professional
Processor: Intel(R) Core(TM) i5 CPU 2.27GHz, 2262 MHz, 2Core(s)
System Type: X86 Based PC
RAM: 4GB
I intend to learn Linux, i know the basic commands and i am a power user who came from windows and also learning C on a virtual machine ( using ubuntu) provided by the intro course ( URL.,, ) and through my reading in this forum/blogs most of the people said if you want to learn Linux go for slackware, so.... Question One: is it possible to install it on this laptop (Dell Inspiron 1545) by that i mean working sound/wireless/touchpad?
View 14 Replies View RelatedI just want to install debian on mine laptop.
here is mine system configrationhttp://74.125.153.132/search?q=cache:8FAQGq76ttsJ:www.hclinfosystems.com/9100%2520BT.pdf+hcl+lx+infiniti+powerlite+9100+bt&cd=1&hl=en&ct=clnk&gl=in&client=firefox-a
so i want to download the iso image which one i have to download and write.
I have two laptops at home and they are both running fedora 13. Now the problem that i am facing is that the internet over here is a bit expensive and downloading the same updates for both laptops becomes bandwith intensive. Can i update one laptop and update the other laptop from the first one? Do i have to install some server that would act as a repo?
View 10 Replies View RelatedI am willing to install fedora 15 in a 32 bit laptop. My laptop has Getforce 9300M nvidia graphics card. I would like to know if there is any automatic way to install the graphics driver with fedora 15. If yes please provide me the information.
Why i am interested to know is that previously when i was using a earlier version of fedora11 i guess, people in the forum suggested me to download the driver from the nvidia site and install it. It was really painful to install the driver in that way.
I've recently switched from Ubuntu to OpenSuse/GNOME, and I'm trying to install grdesktop in my laptop. - I searched it in SoftwareManagement and couldn't find it (I enabled packman, and other repos). - I tried zypper intall grdesktop (but it's the same problem)
- I downloaded the source from grdesktop's website, tar, ./configure shows this error :
checking for libgnomeui-2.0... configure: error: cannot find GNOME2 2.0! zypper install libgnomeui gives this: No update candidate for 'libgnomeui-2.24.4-2.1.i586'. The highest available version is already installed. and I'm running Gnome Version: 2.32.1 as my DEI'm not sure what to do now?
I am running 11.2 on my Toshiba laptop with Celeron M CPU and 2 GB RAM. Should I fresh install 11.3?
View 3 Replies View RelatedI have a problem with opensuse grub - it cannot see other distros on my laptop (Ubuntu and Mint) and the original grup got glitchy when I recovered it (I couldnt reinstall it with terminal, so I used rescatux to recover it, but I couldnt update it). It works with windows. Is it some kind of bug or osuse isnt compatible with other distros?opensuse: 11.4 64 bit
View 8 Replies View RelatedWubi can't retrieve the netbook versions... any fix for this? I really don't want to use anything else but wubi. I used it on my desktop, and it was straightforward and I really prefer it (it's pretty much the only reason i'm putting linux on here lol)
I'm getting an error, it says: an error occured: Cannot download the metalink and therefore the ISO
portion of the log:
Code:
