how to install ubuntu 10.04 on my laptop but im a little caught up between using the wubi or full install heres my dilemma.I like the wubi but it doesn't support hibernation and from doing some reading it is not as stable and has some loss in performance.
The main issue I have with doing the full install is I'm a little concerned that making new partitions may screw up the recovery partition which I find really useful which lets me easily reformat my laptop without having to deal with all the drivers.So my real question here is twofold. Is there a way to still hibernate in wubi? And is the full install that much more stable and faster?Second should the recovery partition be ok if i later decide to start fresh again in the future?
I am installing Ubuntu Server 10.10 on and old Dell Laptop. The network connection is an Xircom PCMCIA card.During install, the computer sees and interacts via the network just fine. For example, I can ping the gateway. Also, the command "lspcmcia" works and show the Xircom card.When I reboot, however, there is no network access, and the "lspcmcia" command is not there. When I try "lspcmcia" the OS helpfully tells me that I can "apt-get" pcmciautils, but, without network access, that fails.I tried adding the install cdrom to apt using "apt-cdrom" and then tried to "apt-get" pcmciautils and it got further, installing some dependencies, but acted like it still was unable to locate the pcmciautils package.
I am using an HCL k38 pdc laptop and I am unable to boot KDE live cd of opensuse 11.4. The system boots to a graphical screen where a progress bar is shown. the progress bar proceeds to about 90% and then my system hangs. ALl I can see on my screen is that graphical image with suse logo and progress bar. Though my mouse works and I can move it all around the desktop but if I try pressing any key (CAPS/NUM LOCK/SCROLL LOCK) i dont see any LED notification for that. this concludes that the system is hanged.
Key board has no issue as I can use it in Windows.
I tried to boot the lice cd in text mode and it worked very fine from there I installed the system on to my HDD in dual boot mode with windows XP. But after installation when I boot opensuse from HDD it stucks at the same position.
I think this issue is with Nvidea graphics card as when the system boots I see an error message that says that the RAM has an address conflict with VGA ROM.
How can I use opensuse. I have even tried ubuntu 10.10 but it also hangs while booting or after booting. So far I have been able to manage only Sabayon Linux working on this machine however the ubuntu 9.10 was working on this system and it also started behaving similarly after I upgraded it to ubuntu 10.04.
I downloaded the 6.06 version of xubuntu because i have a laptop that doesnt support high graphics mode, and i wasnt able to figure out how to get it to run in low graphics mode. i figured that i would get a version from a while back, and then update it up to the current version. now, to the problem. I was able to upgrade 6.10, but now it says Ubuntu version 8.04 available, so i tried to update it. it gets most of the way through the part where it says calculating or something like that, and then it says: "Can't install 'xubuntu-desktop' It was impossible to install a required package. Please report this as a bug." with an option that says close at the bottom. when i click close another window pops up that says: Could not calculate the upgrade A unresolvable problem occurred while calculating the upgrade. This can be caused by:
* Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bugreport. Then the window just closes... anything that i could do to get rid of this problem? EDIT: Is there any way to update directly from an .iso file on the desktop?
Wubi can't retrieve the netbook versions... any fix for this? I really don't want to use anything else but wubi. I used it on my desktop, and it was straightforward and I really prefer it (it's pretty much the only reason i'm putting linux on here lol)
I'm getting an error, it says: an error occured: Cannot download the metalink and therefore the ISO
I am trying to install 10.04 with a cd on a laptop. But when it get to the point where the setup box should appear, where you put in user name and password, it just continues running a screen with a ubuntu background and the curser just keeps flickering.
I recently bought my self a Acer aspire 5552G, and now I'm trying to get the latest Ubuntu on it. I put the ubuntu on a USB drive and inserted it to my laptop. I changed boot orders so that all USB devices would come first. Now if I changed only one USB device to boot first (the one where my USB was inserter, as it indicated it had SanDisc in it) It didn't do anything, it still booted up the Linpus linux ditro wich was installed on the laptop when I got it. It has no GUI and I can't do anything with it.
If I changed all USB devices to the top list of booting, the laptop started and then a text comes on the screen : SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2010 H. Peter Anvin et al. And now it just stays like that and no matter what I press, nothing happens.
A few days back, I burned a CD with Ubuntu 10.10 (maverick?). Have since installed 10.10 on an old desktop (pentium ii, 1.15 ghz) and it boots up ok - (apart from a 'freeze' issue which varies from 10 mins to 2 1/2 hours) Anyway, my immediate problem is I'm using the SAME CD to install 10.10 on a AMD Athlon laptop (which previously ran Windows XP). The installation process starts with the usual: TRY/INSTALL screen - I select INSTALL. The whole process runs for about 40 mins, using the entire 60gb drive (I've got rid of XP). The final few messages are: 'installing system', 'copying installation logs' 'installation complete' - 'restart now'. So, the CD is ejected after which I get a string of '2380 nnnnnn i/o error device sector 533280'messages. Then, 'will now restart' At the restart, up comes the UBUNTU screen and the intro clip...and there it stays. My question, does anybody know what could be happening - if anything?? Remembering that this CD was installed on the desktop.
I have a HP Pavilion dv9000 that I had an older version of Ubuntu on. I wanted to install 11.04 which I have installed on my two desktop computer. The live CD work great and I wanted to install. I clicked on other to install in the hard drive where the old version was and every thing went well until I got to the page were it asked about (who you are) I put in my name and password and clicked on log in without password and then could not click on the forward button. It looked like everything loaded OK as it went and downloaded all the update files.
That was as far as I could go on the install. The CD was a 32 bit version but the computer is a 64 bit AMD. My desk top are AMD chip set also and it installed OK on them.
I've been trying to install Ubuntu 11.04 into a laptop where the Windows OS was... quite FUBAR. And, when I try to load Ubuntu from a flash drive, this comes up.
cp: can't create '/root/var/log]: Is a directory mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such filed or directory
Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg
I have been trying to create a SD-Card with Ubuntu 9.10 and add up some other programs. That has to be all done in my laptop. However, I got into a point that I could not go further. Normally, I would start my Linux SD-card on a board and type the following lines: Code: $sudo apt-get install liblapack-dev $sudo apt-get install libf2c2-dev Is there any way that could be done from my laptop once the SD card is connected to it?
10.4 install on ibm g40 failure. I'm trying to install U 10.4 on an IBM Laptop g40 with .75 gigs of ram with no luck. Workstation CD I use f6 and remove splash- from other options. When I select install option the screen goes black after moving through the Ubuntu dots then the screen goes blank.
I am not sure if i missed a post somewhere, but my search didn't turn up anything. Does anyone know if it is possible to install the Ubuntu Remix on a laptop that doesn't have an Atom processor? I have a small form-factor laptop, but it isn't a Netbook, that I would love to install Ubuntu Remix on, but for some reason it hangs when I try and install it. Does anyone know if it is possible to install this release on a standard laptop? Are there links somewhere that I could follow?
I have a Toshiba Laptop, that I only use now for I-Tunes, and I-Pod.I would like to install Ubuntu on it to play around with, and experiment.Do I have to install Notebook Remix, or can I just install the regular Ubuntu 9.10 on it?
I downloaded Ubuntu 10.04 desktop and burned the CD. I changed the boot order on my Dell Inspiron 8100 to search for CD first. On startup, I see it flash - ISO LINUX something ............ The light flashes on my CD drive for a minute or so. I see a little icon at bottom of screen with a stick figure of a man and something else for a few seconds, then I see a white cloud flash on the screen that reduces in size and disappears, after another minute or so of the drive light flashing everything stops and still a black screen. Then, I tried hitting escape key a couple of times and I heard a few seconds of jungle music. The drive light flashes again for a while but nothing else happens. It seems like it's almost there, but not making it all the way for some reason.
By the way, if it matters, my Dell hard drive is partitioned to C: and D: I thought it would run a little faster that way, but not really noticable. I have most everything on C: right now. I hope to install side by side as I have a couple of applications I need Windows for, but would like to use Ubuntu for everything else. More questions about that later, on getting it to boot from the CD?
Since posting the above earlier under Dell, I have been able to boot from a borrowed 9.04 disk okay. And, was able to boot another computer with the 10.04 disk that I burned. The disk is apparently good, so why doesn't 10.04 work and 9.04 does?
I want to use my laptop for watching cable TV and as a DVR. I need to buy a TV tuner card for the laptop. What I want to know is what brands and cards work with Ubuntu 10.04? Are they easy to install or so I need to be a CLI geek to make it work?
I'm building a website using Drupal on my desktop, and would like to have a copy I can put on my laptop as well.Is it possible to copy my desktop installation and put it on my laptop? Even if it is possible, is it likely to be easier than doing a fresh install of Drupal on the laptop and copying the themes, stories etc from desktop to laptop with a USB stick?
I cant install ubuntu 11.04 on my laptop. I downloaded the ubuntu iso from its official site. I tried several ways to install it like :within windows, through usb, through burning the iso but neither of them worked. When i boot from usb or CD there's just a black screen after the choosing one of the options (i.e. try ubuntu,install ubuntu,etc) and nothing happens. So I had to shut it down by holding the switch after about 20 minutes. But it works on PC without a problem. I have installed it on my PC. If i install it within windows, it completes the installation and then whan I reboot it , it says completing remaining installation and the black screen appears.
I am trying to install Ubuntu 10/10 on Mac PowerPC G3 laptop 500mhz with 320mb ram.I have downloded the ppc version but there is no xserver in live cd.I google it and it seems it is a common problem.I try to fill in empty xorg.conf from one post but it is not working . I tried to restart gnome but it is blank I have to alt-f1 to drop into shell.Display Chipset Model is ATi,RageM3 and it is 8mb agp.
I've been running Ubuntu on my Acer 5100 laptop for about a year and a half. The latest version I had was 10.10 when my disk crashed and burned and had to be replaced. This was an external hard drive as my internal one died long ago and I'm too lazy to replace it. So things were fine until the crash. Bought a new hard drive today (same brand and model as the one the system was installed on before), downloaded 10.10 and installation goes fine. Then, in the end, I am told 'you need to reboot in order to use your new system'. So I say yes and the system ejects the CD-ROM and starts the shutdown process. Then it gets to doing something with the CD-ROM (/sr0) and it gets an IO error. Of course this is because the thing was ejected! So I get this loooong list of IO errors (all the same) on device sr0 and I have to manually reboot the system by the power button.
The system starts to come up, I see the BIOS hit the external drive, and nothing. It sits there with a blinking cursor at the top left of the screen and does nothing. Now, I've looked at a few things: 1: I've made sure the external drive is the first boot device. 2. I've made sure the disk was actually good and not damaged. 3. I've made sure the ISO I downloaded has the same hash as the one I got I've even tried the install on ANOTHER drive and the same thing happens! I know 10.10 can run on this system as it HAS in the past with no problems at all.
I am trying to install 11.04 on an older Averatec laptop. (AMD Athlon XP-M 2200+, 512 MD DDR, 60 GB HD) I tried Live CD and alternative. They both freeze up during installation. Live CD is definitely good as I can open Ubuntu as a trial on another computer. Booting as a trial on the laptop also freezes up.
Tried boot parameters "nomodeset" and "acpi=off" without success. Reformated disk several times with dban which hasn't helped. Even tried xbuntu in case there wasn't enough memory. That froze up as well.
I have tried 11.04 and 10.10 64 bit and after I install the OS my laptop will not boot. The install goes great after being booted from a USB but after the install when it tries to boot from the HDD all that happens is the screen lights up and goes dark repeatedly.
