I've got Debian 6 loaded on a Dell E6520 laptop, and my / partition is nearly full. I used Parted Magic to make room adjacent to / so I could expand it, but pmagic won't work with this because it says that / is lvm2 and not mounted. But Debian 6 says that it doesn't have any lvm's and that / is ext3.
View 1 RepliesI have a directory like this:
mkdir test
cd test
touch file{0,1}.txt otherfile{0,1}.txt stuff{0,1}.txt
I want to run some command such as ls on certain types of files in the directory and have the * (glob) expand to all possibilities for the filename.
echo 'file otherfile' | tr ' ' '
' | xargs -I % ls %*.txt
This command does not expand the glob and tries to look for the literal 'file*.txt'
How do I write a similar command that expands the globs? (I want to use xargs so the command can be run in parallel)
So I recently installed Ubuntu on a blank 250GB HD..
When I was doing the partitions I separated the / and /home and /bin etc
Ultimately I gave 30GB to my /home.
However I kind of need a bit more space now.
There is still a lot of empty space on my HD and I want to know is it possible to increase the size of my /home by about 20 GB?
I want to back up an entire Linux system on a 3Tb external Western DIgital USB3 drive.
I do not want to reformat it from what it is, apparemtly NTFS.
Is there a utility that can act like a file manager like mc, that will permit me to create an ever expanding (to 320Gb) TAR file that will retain all the original file permissions. I have had nothing but disappointment with Linux backup utils with a FAT32 external drive, and I am concerned if I just try an tar the entire drive at once, with around 3 million files, I might run out of memory.
On OS 11.4, 64 bit box. Has anyone figured out how to make the VM hdd larger after the original one has gotten full? I've search the forum but all the searches come up with ways that confuse me.
View 3 Replies View RelatedAlthough I've been dabbling for a while I'm somewhat of a newbie so bear with me: Rather than rebuild my Hardy Server due to root being full, I followed suggestions to create another logical volume on the volume group and put root there. I must have missed some fundamental step. Although the partition appears to be functional, the defined space isn't visible and I am stumped:
$sudo df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/vg--server1-lv--root
4582064 4533388 0 100% /
varrun 1895524 248 1895276 1% /var/run
varlock 1895524 0 1895524 0% /var/lock
[Code]...
Here is the scenario:
I have triple boot
Win 7 32 bit on hard drive 1
Win 7 64 bit on hard drive 2
Data partition accessible by 3 OSs
Ubuntu 10.10 on hard drive 2
[Code]...
Everything is working great. I'm using Windows Boot Loader (used easybcd to attach Ubuntu).
I want to expand /dev/sdb3 to have more space for Ubuntu. I am able to shrink the data partition /dev/sdb2, which leaves an unallocated space. I have backed up /dev/sdb3 using Paragon software.
My question is, what is the best way to expand the /sdb3 partition into the unallocated space and restore the ubuntu image backup so that it will use up all the space (unallocated and current /sdb3)? I don't want to screw up since everything is working properly, I just want some more space.
I am new to eclipse and am having a hard time to find the function to expand or unexpand a block defined by {}.
View 5 Replies View RelatedI have a 7GB unallocated space and I want to expand/increase the size of the preinstalled fedora 13 ext4 size from the unallocated space any ideas?**Using gparted live is not working is just displating the whole sda drive.
View 4 Replies View RelatedI have been using Ctrl +/- to expand/shrink the displayed font on web pages in Firefox since I figured out how to do it back in version 0.something. Today I happened to be accessing this page https://personal.vanguard.com/us/fun...T#hist=tab%3A2 and I noticed that when I expanded the font the text to the right side was pushed off screen - not unusual - but that I did NOT have a slider at the bottom of the browser window to allow me to move to the off screen text. I continued to press Ctrl+ until the font would no longer expand. At the very larges font the slider reappeared however, it will only move a little bit to the right.
I then accessed the page with Internet Explorer and Firefox 3.5.8 on an XP box - the slider appeared as expected and I can slide to the right to see all of the enlarged text.
I created a new user on my Ubuntu machine, signed on as that user and viewed the page. Again, no issues. Seems like something in my profile rather than the web page itself or Firefox as installed on my PC.I tried disabling the few addons which I use (Noscript, Addblock Plus, etc.) - no improvement.I now created a virtual machine (VMWare) and installed Ubuntu 10.04 64 bit. Tried the page in Firefox and it works fine. Then I copied my profile to the virtual machine - the page experiences the same problem. So obviously there is SOMETHING in my profile which is causing the issue.
And for my next trick I replaced the copy of prefs.js in my profile on the VM with prefs.js from the default profile. Other than forgetting everything I have ever configured in Firefox, this has fixed the problem. But not a pretty way to go.
Did anyone else notice in the 10.04 RC that it is very difficult to expand a window from the left or right side? The threshold is one pixel long before the arrow disappears.
View 2 Replies View RelatedThis forum might not be the best place for this question, but some people here are pretty knowledgeable and may have more insight than I do about this. Anyways, I'm thinking about expanding an NTFS (Windows 7) partition on my desktop computer into unallocated space. I know that there is a risk when shrinking a NTFS partition due to fragmentation but are there any risks of data loss from expanding a NTFS partition? My common sense tells me there isn't a risk but I want to be 100% sure I won't lose any files.
View 4 Replies View RelatedI installed opensuse 11.2 some 6 months ago as an alternative to windows 7, on a 44GB partition. Having become my primary OS, I am looking forward to expand the ext4 partition from 44GB to the maximum possible. I have some 24GB unpartitioned space, and free space on NTSF partitions (one of which could be deleted if necessary). What is the best and safest procedure to perform the partitioning.
View 8 Replies View RelatedSo today I needed to switch from openSolaris to a viable OS on my workstation and decided to install openSUSE after having good experiences with it on my personal laptop. I ran into some problems partitioning one of the two hard disks installed on the system. I was limited on the amount of time I could spend at the office doing the install so I decided to use LVM on the one hard disk that seemed to work okay.
I picked LVM because although I don't know much at all about LVM, I at least know enough that it would allow me to expand the root and home partitions once I get the 2nd hard drive working correctly. So now that I've gotten the 2nd disk working okay, I've created two physical volumes on the 2nd drive, one to expand the root partition and one to expand the home partition. So, my question is, can I expand the root an home partitions while they are mounted or should I boot into a live CD environment before I expand the partitions? If I could expand them without booting into a different environment, that would be so great as I don't want to have to drive out to the office again before Monday. BTW, I am a new openSUSE user and an ex Ubuntu user. I loved the Ubuntu forums but had to switch because I do not agree with the direction that Ubuntu is taking.
Right now I have a 320GB system drive and 3TB data drive. I want to add two more 3TB drives and do a software RAID5 3x3TB. Is that possible without losing the data that is already on the data drive?Just want to make sure before I bought the 2 two drives. Not looking for instructions on how to do it,but if you want to include some that would be great too Just making sure it will work.
View 1 Replies View RelatedI have rtl8187se linux driver, during installation in debian linux it tells that "the kernel is not a generic". How can i install this driver in default debian kernel (without generic)?
View 1 Replies View RelatedI cant install programs that end with .deb automatically... how to install them manually on konsole?
View 5 Replies View RelatedI have just installed Ubuntu (/dev/sda7) and Debian (/dev/sda4), but since I have updated all informations on Ubuntu, then Debian did not appear anymore on the grub list. There is an wiki I have found, but I an not really sure about what to do.
Here are the boot informations:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks at sector 488861020
of the same hard drive for core.img, core.img is at this location on
/dev/sda and looks on partition #3 for (,gpt3)/grub.
[Code]...
ps: on this file, it says that the /boot is installed on the MBR and /dev/sda3. I will remove the boot from MBR as I am now using /dev/sda3 instead. Sorry for my english
I know of 3 at least so far Sidux and GRML and DRBL are there any others that are based on stabel or sid? or what? frugal as in like puppy, tinycore, dsl, etc nomadic like, usb, hd, etc?
View 14 Replies View RelatedI'm trying to install mc using apt-get:
apt-get install mc
and get the following error:
Failed to fetch [URL]
404 Not Found [IP: 130.89.149.226 80]
Tried /etc/apt/sources.list, fetching specific version, tried -t, tried "man apt-get"... but I cannot get through this.
I have 3 monitors and installed Debian Lenny. After installing the driver I was able to set resolution to 1600x1200 just on the monitor to the left, no output to the others And after some config I lost it totally.
View 1 Replies View RelatedI am a newbie but have great expectations. I have installed Debian 6 within Virtualbox and want to install nagios3.2.3. I have downloaded and updated I believe everything but when I go to execute the command to compile I am given an error that I do not have a C compiler. Where do I go to get a C Compiler for Debian 6? I have updated my source.list with new websites but they have turned out to be 404 error pages.
View 3 Replies View RelatedI know that Redhat have a log in /var/log/cron , I can check the cron job log here , I would like to ask where is the log in Debian ?
View 1 Replies View RelatedI have a busybox error when I try to run Debian 6. It's like Grub cannot find root (initramfs)
My system is:
- RAID0 with dmraid
- /boot ext2 (from moonOS installation --ubuntu based--)
- ext4 (moonOS wich have the Grub2 installation, where I can setup Grub)
- / ext4 (installed with dmraid=true)
After Debian installation (dmraid=true) I don't install grub, I run moonOS and I type:
update-grub
It detects:
Code:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-25-generic-pae
Found initrd image: /boot/initrd.img-2.6.35-25-generic-pae
[code].....
How to configure ACL in Debian so that some IP cannot browse Facebook for 12.30-2.00 PM. And some IP can browse Facebook all time .
View 1 Replies View RelatedIn order to download Debian linux I open this link: [URL] but there are five dvd iso it means debian linux volume is 4.4 x 4 + 1.2 = 18.8GB? or What is correct one?
View 5 Replies View RelatedI used ubuntu for few months.yesterday i installed debian .Then i try to update .But it was failed.It says your system up to date. But i didn�t update it.Then i go to settings in update manager.When i click it i got a window named software sources(as super user).It has several tabs. first one is debian software.there i couldn�t tick any one of three menu s under downlodable from internet Under debian updates proposed update and security updates are in inactive stat.I think i can only use cd as package source.how can i use internet to update my new system.
View 5 Replies View RelatedNot new using linux tho... im not an expert, im running Debian Squeeze cat /etc/debian_version squeeze/sid
View 3 Replies View RelatedI've tried installing dig on Debian, but the apt-get utility doesn't seem to know what it is. Is it part of some larger set of packages? Where can I find this?
View 1 Replies View RelatedI just installed a Sata WD 500GB hard drive, shows up in BIOS as secondary master drive, but do not see it after boot. What gives?
tone@homeserver:~$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/hda1 9.2G 3.3G 5.5G 38% /
tmpfs 881M 0 881M 0% /lib/init/rw
udev 10M 740K 9.3M 8% /dev
tmpfs 881M 0 881M 0% /dev/shm
/dev/hda2 65G 197M 61G 1% /srv