I have a computer that was given to me and is no longer booting up properly. It's an Acer with VISTA installed. I would like to format the hard drive and start over with Linux. I don't have the original windows vista disk, I don't believe the computer even came with one, and no back up disks. Apparently this is the only way to format VISTA. When I am in the command prompt here is what happens.
C:> format c:
The type of the file system is NTFS.
Enter correct volume lable for drive C:
I don't know the correct label.
Searching on the forums I found this.
format c:/fs:NTFS/p:/
That doesn't work. I get this:
"Invalid parameter - /p:"
I have only known about Linux software for the past couple of weeks. I want to install Ubuntu 10.10 on an older desktop I have so I can become more familiar with it. I am average in knowladge about Windows OS and MS-DOS. I tried to install Ubuntu and I get an error message about the harddrive. The CD I am booting with will load on my other PC with Windows XP on it. I have only let it run on it long enough to verify that it is bootable.
I have made a floppy boot disc following the instructions on another Linux site about Ubuntu. I have also tried to boot my alternate PC with the floppy and it boots up. The harddrive on my working PC is a Maxtor 40gb formatted with NTFS file system. The harddrive in the older desktop is a Western Digital 80GB WD800LB-55DNA0.It worked fine with Windows XP on it. I also made a Western Digital DATA Lifeguard for DOS floppy and it boots with it.
I have Toshiba Satelite E105 laptop with installed home vista and now i want to install Fedora 10.My problem is that when i was trying to partion my 290gb hard disk(C drive)after going to storage managament and going to "Shrink Volume "option then my laptop can maximum provide 970 mb space to shrink whereas i need minimum 20 gb space for linux.What should i do?I have 4gb RAM.Please tell me how to install fedora10
However, I want to totally format the hard disk so I have no operating systems left on there.
I have created a usb boot disk for installing windows.
So I want to re-format the whole hard disk. Then boot up with the usb and install windows. Once I have done that. Then use the rest of the hard disk to install Fedora 14 from my other usb.
However, I am not sure how to completely format the hard disk. I want to start from a clean disk.
I am definitely non-techy, non-geeky, a GUI guy really, but learning steadily - I have been using Linux for a while now, have just moved on to Ubuntu and find it really great to use - I now feel confident enough to have just Ubuntu Linux on my Sony Vaio laptop (at the moment I have dual boot with Windows XP)
however there are just a few Windows programs that I need to use that will not run under Wine
so I would value comments/advice on my 'grand plan'
1) re-format the Windows partition so that Ubuntu can use the entire hard disk (I don't know the best way to acheive this - is it to reinstall Ubuntu using all available disk space? or is it better to just format over the Windows partition and treat it as a second hard disk?)
2) install VirtualBox and use a version of Windows as a guest OS so I can use those Windows programs when I need to - I understand this is easier than having to reboot the computer to get access to Windows
when i install ubuntu on vista from iso file directly from hard disk it install the copy completely but after booting up a white sreen comes up with vertical coloured linning.
What is the recommended method these days for command line partitioning and formatting for the Terabyte size hard disk.?
It was easy to keep up when your working or have access to hardware for re-purposing, but that has all dried up and my knowledge has been left behind. The problem(s) are with new, recent hardware
Following a crash from a now detectable faulty stick of RAMM, I've lost one of my data hard disks and my fiddling with replacement seems to leave various errors/warnings mainly about GPT not supported and this message is still present despite trying fdisk, cfdisk, gpart, gparted, and(?).
System is an ASUS mobo using SATA drives (root 500Gb: MBR+3 partitions;/, swap, /home), and two 2.4TB with single partitions.
I've recently installed openSUSE 11.3 with GNOME When I was working on desktop settings, it locked itself, and it doesn't accept password I set during installation. I know that password is right, because it worked in YaST.
How to solve this problem without loosing any files? I haven't done backup... Is it possible to reinstall system, without formatting hard disk, and loosing files?
I have been trying to figure out how to format my hard drive when I'm installing Fedora 11. When I boot from the live disk, all installation were done automatically, so I didn't see how I can do it. I tried googling it, but didn't find anything on how to do it either.
I have a 250GB external hard drive that I want to format to ext4. It will be used to store back ups of my documents, music and pictures. I tried booting the Ubuntu 9.10 Live CD (amd64) and using gparted to delete the partitions that where on the hard drive leaving only unallocated space, then creating one new partition that was ext4. I clicked apply and after a short time it said all operations completed successfully.
Now the problem is it won't let me transfer any documents onto the hard drive, or even create a folder or file. If I go into the properties of the hard drive, under the permissions tab it says I am not the owner...?
What I've done is partition my external hard drive to have 130g for my Windows info. Then putting the 90g towards Linux. I used a live cd on my home computer to format the 90g of Linux. I'm simply wanting something to learn more about from time to time that I can use on my home computer, laptop, fiance's computer, etc. So the formatting went successful. I have linux on the 90g of hard drive that I wanted it on. The problem is this. When I take the live cd out, when I remove my external hard drive from my computer. The home computer (which has Windows) won't boot. It comes up with a error 21. But now when I boot with the external hard drive I use, I make it to the boot menu and can boot from Windows.I need to be able to boot from Windows on this home computer, since my mother and grandparents use this computer quite a bit. I'm not always going to have my ext. hard drive plugged into this computer, so I need some help if you all know now.
I made a new partition on my hard drive, and installed Windows XP on it. However, because of space shortage on the disc (didn't bring my external HDD's with me) I could not "afford" to make the partition bigger than about 7GB. Turns out that's not quite enough. So I thought I'd try to resize the partition. Booted from my Ubuntu LiveCD and entered the partition manager. I'm able to tell the program that I want to resize the Linux-partition (so it sets the now freed space as "unused", but when I chose to "resize/move" on the XP-partition I do not have any free space. Does this mean that I have to resize the Linux-partition (until now I didn't actually resize it, only set the job as "pending" hoping that I could select both to shrink the Linux-partition and extend the XP-partition in one session), or do I have to format the XP-partition and make a new one (larger this time), then reinstall XP?
how I can format my hard drive with Ubuntu on it. I have a disk with windows vista home basic on it and it wont let me install windows until I have formated the hard drive.
I have this 1.5 terabyte external hard drive. It has some bad sectors and although I keep reading that you can't really do much about them, I'm going to reformat the hard drive. I was just wondering what utility would be best, or because it's NTFS and I need it to be NTFS afterwards, should I just do this on Windows?
I didn't know how to Make a cd image out of the Ubuntu iso so I made a seperate partition in my drive.Now I'm wondering how to delete the windows partition without formatting the whole hard drive.how to create a bootable cd image
I have tried many distros and get the same message faulty hard drive SATA the computer was running Windows Vista just fine. I changed the Bios for SATA to be ATA instead of ACHI..
I'm trying to partition/format a new external hard disk for backup and have run into a snag that now prevents my computer from booting. In the description below of what happened please bear with me as I do my best to remember the commands and screen output (which for obvious reasons I don't have in front of me).As root.The disk was subsequently writable. However, I then realized that the default start and end cylinders had resulted in a very small partition apparently occupying some free cyclinders in the beginning of the disk.
So next I ran fdisk again, deleting the sdc4 I had just created and creating a new one instead, this time using the cylinders at the end of the disk. When I exited fdisk I got a message something like that the new tables can only be read upon a subsequent reboot. I ran mkfs again, but not e2label. Indeed using /sbin/fdisk -l, sdc4 still had the small size as defined initially. So I rebooted.
Now when it comes up I get something like "checking filesystems. fchk.ext3: can't resolve 'LABEL=/media/LaCie2TB1'" and am prompted to login as root to correct. I tried to simply delete sdc4 again but that didn't help. I also tried to edit /etc/fstab (using vi, which I don't know at all) but it kept telling me that this is a read only file, even though permissions are rw for root.Can anyone out there help me so that (1) I can boot into my computer, and (2) I can correctly partition and format the hard drive??
i've fedora 15 & windows vista installed on hard disk partitions.i can access windows files from fedora but how to view fedora files when i'm working on windows???
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
is there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
I wanted to install a Linux distro to a flash drive so that I can have a portable OS with all my settings, programs, etc. wherever I go. So I fired up a Linux Mint Live CD and installed Mint to the flash drive, and this seems to work OK. But now, whenever I try to boot up my system normally without the flash drive plugged in, it doesn't seem to work. It basically hangs for a bit, and then I get the following prompt:
However, when I try powering my system up when the USB is plugged into the computer, it gives me an option between using the OS installed on my USB and the OS installed on my HD. Selecting the latter, everything loads up just fine. I'm guessing that installing Mint to the flash drive somehow messed with my native Grub installation.
I recently tried Fedora on my laptop (previously Debian; I was bored one day) and gnome-disk-utility (palimpsest) warned me that my hard drive had numerous bad sectors. I re-installed Debian to find that this software was installed before so why had it not warned me?
When I load the disk utility, it says SMART is not available. I've got smartmontools installed, I can run a self-test with smartctl but I don't think this shows bad sectors. I've tried starting smartd on startup but the disk utility never changes from "SMART is not available". It is possible for it to work with this hardware as it works in Fedora on this laptop; any ideas?
a friend of mine just given me an old 2004 IBM NetVista 8305 desktop and suggested to use Linux Ubuntu which is something new to me. So i installed it via USB memory stick & it works. After installation of the OS I am impressed with functionality & speed. when i conect the external hard drive via usb it doesn't show & i tried my usb flash disc it showed the same problem. I tried both disk in my laptop (Windows XP) & it works.
I am trying to transfer files from a SATA hard drive with Windows Vista (Home Premium) installed on it. Some files I can easily copy over, others just say Access Denied.
I'm sure permissions is part of the issue, unofrtunately Windows is unable to boot at all (surpise surprise) so I can't adjust anything from within in. I know with XP drives I can easily copy and paste onto my Ubuntu machine. I'm using a SATA to USB converter that let's me plug it in and my desktop reads it like an external hard drive.
I've gone into the properties and under permissions it shows my account as having access to Create and delete files under folder access amd "---" under File access. My group and others show None and --- for Folder and File access. I can post a link to a screenshot tomorrow. I've tried to also select Read and Write for File access but it goes back to the dashes before I can apply it.
I am running 64 bit Ubuntu 9.10 and do not have the sharing aspect installed. Any questions please feel free to ask me.
I have been running ubunto 9.10 and love it. Orginally I was planning on using it from time to time but now with vmplayer and xp I am not sure if I will need my dual boot very much at all.
I have a 400 GB hard drive I want to give more HD space to Ubuntu but after doing some searching read that linux should not be huge. I was going to resize using GParted, put vista to say 50GB, leave Ubuntu along at 67 GB. Then how can I make the left over 275GB for both to used for Data?
I had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
I've been asked to move data from an old external hard drive to a new one, and to make the new one compatible with the Macintosh. (The old drive's USB connection has died, and I'm connecting to old the drive using a PC card that provieds an eSATA to the drive. The recipient's Macintosh doesn't have a PC card slot, so she can't access the old drive anymore. Hence, the new drive.)
Naturally, I'm doing this data transfer using Linux. I've discovered that I can format the drive as HFS+ using mkfs.hfsplus from the hfsprogs package. But I need to know: do I need to do anything special with the partition table? Is there a special Macintosh partition table format that I need to format this disk to? If so, what tools can I use to get the right format for the partition table?
I bought a 3 TB western digital but I cannot format it. I have to split into 2TB and 1TB (or less because it holds 2.73 TB actually). Is that normal because of linux does not support 3tb yet? I note that I tried into EXT4 and JFS (after tabel creating)
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
