I have a Desktop system using the Intel DG45ID motherboard with integrated graphics. I can't install from the 9.10 LiveCD. It can't find the Hard drive which is on the chipset's SATA controller.However, I can install 9.04 just fine. I can even do the 9.10 upgrade without a problem.Does anyone know if this bug has been reported. I'm hoping 10.4 has this fixed. I'll test the beta to see
View 9 Repliesubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies View RelatedI'm trying to get my work's infrastructure built at home before I go up there and show the boss. It is as follows: VMware esxi installed on the server with:
Windows server 2008
Ubuntu 10.04 server
I've got VMware installed. And I have spent the past 7 hours trying to figure out how to manage it. I found out that vsphere has not nor will ever be supported for Linux; which was my first problem.
Second Problem So I had to dig around for a spare Windows 7 dvd. To my UN-surprise it blue screened before it even got to the Windows installer.
Third Problem So I dug around for my Windows XP disc. Wouldn't find my sata hard drive and I wasn't about to dig around for a floppy drive and disk, in order to install it.
Fourth Problem I remembered that I had a dual boot of Windows 7 downstairs and proceeded to download and install vsphere. It wouldn't install because of some updates that needed to be installed. I installed them and got vsphere installed as well. However upon connecting to my vmware esxi, there was yet another error that had to do with some update. I found out that the error had been existent since 2009 and for some reason NO ONE at VMware has fixed it....
I have appealed to anyone on this forum site for any help on installing Unbuntu 10.04.1 LTS on a MACBOOK PRO (Mid 2007 Model. Basically I've followed a few threads & posts on how to Quad boot a Macbook Pro & it seems pretty straight forward,however. Ubuntu is not playing ball for some reason?? The first attempt I tried I had the partitions as follows:
I am using a 500gb sata internal hard drive.
WIN 7 - 125gb
STORAGE - 15gb
WIN XP -125gb
MAC OSX - 180gb
FREE SPACE 50gb - Formatted DOS - Which would become the EXT4 & SWAP FILE partition.
After following instructions:
http://hydtechblog.com/2009/01/26/du...windows-vista/
[Code]...
I have been trying to install Ubuntu on my main computer for some time. I think I have two problems: my hard drive and video card. I started with Ubuntu 9.04 but got nowhere. I am now trying Ubuntu 9.10 32 bit. I can at least use the live cd if I put the video on safe mode. Just in case you are wondering, I have tried other distros: Fedora, OpenSUSE, Slitaz, Wolvix, etc. Only Slitaz and Ubuntu 9.10 works on a live cd.
Information on my computer:
OS: Trying to install Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia) Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM Ram: 4 GB (I think, its been awhile since I built this thing) DVD Burner: LG I think I have two problems: the Sata Hard Drive and the Video Card. When I go to install it, I can get to the install menu but from there all I get is a blank screen. I have tried to put the video in safe mode then install it but I get the same result: a blank screen.
How do I know if Ubuntu recognize the Hard Drive and Video Card? I tried the mount command to see what it sees but I didn't notice any Sata Drives. I was told that I may have to do something with the kernel so it will recognize my Hard Drive. How would I do that?
I have been working on this for awhile now. On a side note, does it matter which Sata Plug the hard drive is on? Right now I have it on the 1st one but I would like to move it to the second one because I want a dual boot system. And yes I know I can use the same hard drive but I would like to keep them separated and use a switch to pick which OS system to use.
While running on the Live Cd, Ubuntu seems to know about my video card and ask to install some drivers but then it asked to be rebooted and it came back up not recognizing anything; video card and hard drive that is. On the live cd I ran the following commands: lswh, lspci, mount, and df. I am not too sure if they will show if the hard drive and the video card are working since I did them on the Live CD. Also on the lspci command, I did this after Ubuntu loaded the driver for the card.
[Code]...
i have a netbook compaq mini with a sata toshiba hard drive.XP was installed on this machine until the hard drive started to have bad blocks.Then i bought a mypassport500go to install f14 on it.It worked but know the sata hard drive is more and more faulty.When i try to boot f14 it displays :acpi : package has zero elements. So i cannot boot.I tryed rescuecd, does not work either.i tryed many kernel params to disable sata at boot but it seems to be builtin.there is no option in the bios to disable the hard drive.
View 8 Replies View RelatedI have just changed my OS from Vista to Linux Fedora 10. After looking at my system I notice my SATA drive was not recognised its my 2nd drive. Is this a normal think or can it be fixed.
View 1 Replies View RelatedSomehow Fedora 12 does not find one of my Sata drives (Seagate Barracuda 500GB) on the motherboard (Asus P5Q pro). The drive is attached to SATA_E1, which is a Silicon Image Serial ATA RAID connector. The drive currently has Windows Vista 64-bit OS which has been working fine. Fedora install loads correctly without errors, but only shows my RAID system on SATA ports 1-6.
WHAT I HAVE TRIED:
I have tried showing RAID as IDE in the BIOS, and setting it to compatible mode. Still does not detect.
I have tried setting the drives to ACPI mode in BIOS. No effect.
OTHER INFO:
I'm installing the x86_64 version of Fedora 12. I have run the Debian i686 installer and it picks up this volume without issue.
Can SATA 3 (SATA III) Hard disk be run on motherboard which only supports SATA II, except sacrificing the speed (throughput)?
View 2 Replies View RelatedI have 4 hard drives in my computer. 1 for may root and home partitions. 2 extras for storage and 1 for Windows. I have the hard drive with my root and home partitions set as the first hard drive in the bios. However, in the Ubuntu setup it isn't the first one in the list. I would have thought that the first drive would be get set to sda. That is not the case.
View 1 Replies View RelatedI have a mini hp 2133 with windows vista home basic which may i add sucks big time. I'm trying to install Ubuntu Remix on it but during the prepare partition part i get the same screen
mini hp 2133 does not have a DVD or CD ROM. So i'm installing this form a USB.
I've tried installing Ubuntu from the installation disk, flash drive, and using windows installer. The drive and disk said I didn't have enough memory open to install (I have 160GB open)upon looking around in the demo, i noticed that it couldn't find my hard drive as it wasn't on the drive explorer. So i searched for answers and found a few possible ones but i wanted to find someone with my exact problem--Couldn't find any. So then I came upon the Windows Installer and Tried it out. All went well until i had to reboot, it said it couldn't find the installation.iso (which is indeed on my computer) and that i should run "Chkdsk /r" and i did. Nothing changed. I still believe that Ubuntu can't see my hard drive when windows can, why is this? Is there a way to fix it? EDIT: How could I forget to mention I'm on Windows 7?
View 5 Replies View RelatedI have a number of drives that I am setting up for friends who wish to switch/alternate from Windoze. So far several completed. One particular drive is being a bit difficult. When checked on my system[10.10] by Sata/USB wire it reads OK and gives the following info. 200GB, 768kb used, file sys Ms-Dos
When installed on the Mobo as main drive and machine booted set to boot from HD it sometimes reports 'No Drive Found' Reset the BIOS to boot from CD and Load Ubuntu from DVD- it goes through load routine then reports 'Error- cannot Mount drive[or words to that effect] Tried installing frm CD/DVD drive to the disk via the SATA/USB wire But that failed also with CD Auto load error So the disk seems to need setting up in some way to suit Linux presumably just like FDisk in Dos/Windoze
I tried to load Red Hat Linux 4 on my PC, which has 945 MB, Core 2 Duo Processor, 2GB RAM, 250GB SATA HDD. But i couldnt do so as it did not detect the hard drive and was asking for drivers. I changed the SATA settings to Legacy but still it didnt recognise the HDD...I have Windows XP SP3 also installed on it.
View 2 Replies View Related"Disk sda contains BIOS RAID metadata, but is not part of any recognized BIOS RAID sets. Ignoring disk sda" That's the message showing on the screen. I used to install the fedora 12 is no problem at all. And last time I see fedora 13 come out, then I want to try it. I also try my different destop, it also coming the same thing. don't know what happen? Could any one answer my question. This is my first time here.
View 4 Replies View RelatedHey everyone, i am trying to install 10.10 on a netbook i have, and i did it all okay, but it would not boot up, so I want to re-format the hard drive, but the hard drive is not showing up on the partition editor (only thing that is showing is the usb i'm booting up off of)
I finally got it to install windows xp, but i really only want to put ubuntu on it (no need for windows on a net book)
When I start the Live CD I can see my harddrive and access it. But when I start the setup, it cant find the harddrive and I can not choose it. Ive tryed more than one cd's and another distro (built on Ubuntu). The hard drive works fine, Ive got Windows 7 already on it (help me change back to linux). I know the computer works fine as I once used another computer to install ubuntu on the harddrive and then moved the harddrive to my computer.
View 8 Replies View RelatedDear OpenSUSE experts: I am a dual boot computer: Win 7 64 bit and OpenSUSE 11.2 64 bit. This computer has 3 hard drives: SSD, 500GB sata II, 1 TB sata 3. SSD contains openSUSE 11.2 500GB sata II contains Win 7.
Win 7 sees the 500GB sata II drive and the 1 TB sata 3 drive. openSUSE sees the SSD drive and the 500GB windows drive. The Motherboard BIOS sees all 3 hard drives. Is it openSUSE not support sata 3 drive? Or do I have to install special driver for it to see it in OpenSUSE?
I have REHL 6 Desktop. I have a macbook pro 7,1 with nvidia graphics and (I believe)a nvidia sata controller. I have fedora currently installed with no problems during or after installation ( with a few drivers of of course).
When I boot with the disk i burned ( works on other computers) it comes up of a list of devices to select and when i select local CDROM or DVD it goes to select drivers. So, then I tried "burning" the installation files to an external hard drive then I used the DVD to boot and selected Hard Disk then selected SDB1 (path of external HD). With this method I get to the Graphic installation screen and can go to the part were it says custom partitioning. I select ok then it say the only disk that is available is SDB1 (EXTERNAL).
Seen this posted several times, currently running F10 and cannot upgrade to F11 as it does not find the hard drive.
AMD 64
SATA HDD
Used these boot options: acpi=off pci=nomsi
When I try to install 10.4 on my hard drive, I get all the way to the "Prepare Partitions" menu and there are no disks listed and all button are grayed out. I am installing on an EVGA X58 motherboard with Intel ICH10 and I have AHCI enabled. Does Ubuntu support AHCI? Do I need drivers to install?
View 3 Replies View RelatedI try to install debian with an USB memory stick and the netinstall image on my new computer. But the debian-installer is unable to find my hard drive. Only the USB device is listed. I also tried Kubuntu 9.10 and this works fine. What can I do? The result from lspci on kubuntu:
[Code]....
I just finished a build of a new GNU/Linux boxen with openSUSE 11.2. I have a MSI Big Bang Xpower X58 motherboard which has two SATA controller chips, one is the standard Intel ICH10R chip for SATA 3.0 Gb/s and one is the Marvell 9128 chip for SATA 6.0 Gb/s. The BIOS recognizes the Western Digital Caviar Black 6.0 Gb/s drive on either SATA controller chips, /however/ I am unable to install (and boot) when the drive is connected to the Marvell controlled ports. As you can guess, I'd like to boot from the faster interface!
1. The BIOS allows me to select the Western Digital drive as a secondary boot device, so I know, at least at the BIOS level, it's there. This is true whether I have the drive connected to the Intel or Marvell ports. (The DVD drive is the primary boot device.)
2. When trying to install openSUSE 11.2 from DVD, the installer says that it can't find any hard drives on my system when I have the drive connected to the Marvell port. The installer finds the drive fine when it is connected to the Intel port.
3. I installed everything with the drive connected to the Intel port. I switched the drive to the Marvell port afterward and the system refuses to boot completely, stalling at some point where it starts to look for other filesystem partitions. This led me to conclude that perhaps the problem is with openSUSE and not hardware weirdness with the system having two separate SATA controllers?
I recognize the obvious need to back up the contents and follow a certain duty of care before attempting to clone my failing pata 250g HD to a 1 tera byte sata. What problems if any could come up when cloning from a failing pata to a sata HD? I'd like to make the switch to sata for many reasons if possible. It is indicated that the HP d530 sff here supports both types.
View 2 Replies View RelatedIs there a tool for Ubuntu that will detect whether I have a SATA or a PATA hard drive interface, even if there's no hard drive inserted?
View 3 Replies View RelatedI have an old computer that I want to turn in to a backup server. I was planning on using a 1 TB drive connected by a SATA card since the motherboard only has PATA. However when looking everything I've found makes it sound like I need to install the card for it to work. I want to know if I can install Debian to the hard drive through the SATA card or not?
View 6 Replies View RelatedI have a seagate SATA hard drive that was running a mythtv distro. It had 3 partitions, EXT3, swap, and XFS. I started having I/O errors on boot and saw error messages on both the EXT3 and the XFS partitions. I also heard some clunking sounds on the drive when it was reading, so I thought hell, the drive is dead.
I have since replaced the drive and everything is back up and running on the replacement drive. I thought hell, the seagate drive is toast, but I just want to verify it with some sort of tool. I have the hard drive in a Vantec NexStar external hard drive case (SATA->USB) and found there was a tool called badblocks. Ran badblocks on it, which ran for 24ish hours and found no bad blocks. I also didn't notice any clunking sounds while it was running.
I ran
Code:
badblocks -n -v /dev/sdb
Is badblocks a proper test to run on external hard drives or was I just wasting my time? Is there any way that I can really test it without removing it and connecting it with SATA to the motherboard?
I have tried many distros and get the same message faulty hard drive SATA the computer was running Windows Vista just fine. I changed the Bios for SATA to be ATA instead of ACHI..
View 1 Replies View RelatedI have AMD athlon 64 processor, Seagate 160GB SATA Hard Disk, ASUS A8VMX mother board.With this configuration, I can Install FC7 without any error. But all the latest releases after FC7 is not detecting my Hard disk. Is there any solution to solve this problem? Actually I'm searching for a solution when the FC8 released. Now I have all the later releases from FC8 to FC11 DVD except FC9. But none is working .
View 1 Replies View RelatedI have two drives one is a 500 gig SATA drive running Vista SP 2 now the other Maxtor 160 Gig drive is empty. I would like to install Ubuntu on that drive. Now I just though of installing from the setup however would this screw up my Vista partition ?
View 1 Replies View Related