Networking :: Error: Code: Using Intrapositioned Negation Deprecated In Favor Of Extrapositioned
Nov 25, 2009
I'm using them to make a simple firewall on the girlfriends computer that is directly connected to the Internet. I wish to block everything except for a SSH port for me to admin with, and normal use things like a web browser. I grabbed an old template for the config and modified as needed. I'm getting an error that I'm not sure what is causing it. it is saying all incoming packets on any device is accepted. Or since there are explicit rules for eth0, that lines just means for any other device, which in her case there are none, so ends up meaning nothing?
[code]...
View 2 Replies
ADVERTISEMENT
Mar 5, 2011
Having not used Clive in over a year I went over to [URL]... and downloaded, built, and installed both Clive and URLgrabber. Here is error message when I tried to run Clive,
[code]...
View 10 Replies
View Related
Aug 18, 2010
I have been trying to install this nice looking piece of software for the last 3/4 days, my lastest error is..
Code:
** Message: pygobject_register_sinkfunc is deprecated (GtkWindow)
** Message: pygobject_register_sinkfunc is deprecated (GtkInvisible)
** Message: pygobject_register_sinkfunc is deprecated (GtkObject)
INFO : Loading Exaile 0.3.2.0...
INFO : Loading settings...
** Message: pygobject_register_sinkfunc is deprecated (GstObject)
Traceback (most recent call last): .....
I have installed:
pygtk-2.16.0
pygobject-2.21.5
gst-python-0.10.19
dbus-python-0.83.0
pycairo-1.2.2
gobject-introspection-0.9.3
libffi-3.0.9
View 8 Replies
View Related
Jan 6, 2010
I'm using Conky in my Ubuntu 9.10 Karmic. I have an error message like this:
Quote:
Conky: border_margin is deprecated, please use window.border_inner_margin instead
Conky: one or more $endif's are missing
Conky: desktop window (1a00065) is subwindow of root window (10d)
Conky: window type - override
code....
View 3 Replies
View Related
Aug 27, 2011
I find network-manager inconsistent most of the times and hence use the /etc/init.d/networking script to bring the interfaces up. But for sometime now I have been getting these sort of messages :- $ sudo /etc/init.d/networking restart Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces ... (warning). Reconfiguring network interfaces...done. If its being deprecated, then who or what is going to be taking over those functions?
View 3 Replies
View Related
Jun 8, 2010
Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
View 2 Replies
View Related
May 7, 2011
if i can use Cherokee for my http service rather than Apache2 ? How do i stop apache2 from auto starting at reboot time ?
View 1 Replies
View Related
Jun 23, 2010
Now that Ubuntu is at a LTS stage with Lucid and is easier to install PV in XenServer, I have been wanting to drop my current debian VM nodes in favor of Ubuntu 10.04. So far I have DRBD8 and OCFS2 all working nicely as primary/primary and I am on the next stage of my setup by installing ldirectord and heartbeat. Can anyone shed some light on heartbeat-gui (hb_gui) as it no longer seems to be in the repositories (since Jaunty)?[URL].. I understand that Lucid now uses pacemaker as part of a clustering suite but I have no idea if I really need it. I really liked being able to run hb_gui and logging into the heartbeat cluster to manage resources via point and click so if anyone has any hints on replacements or newer preferred methods to accomplish the same tasks via point-n-click,
View 1 Replies
View Related
Jun 27, 2011
If I have a hard-disk with Ubuntu fully installed on it and I want to - all of a sudden - use Windows XP, is it mandatory that I firstly format the hard-disk first? So far, I have used two versions of Windows XP; one of them is from a few years before the other. Both copies of Windows XP when in start-up from booting from CD are causing errors. One of them is a BSOD error (0x0000007B) and the next Windows CD is stopping and giving me an error with setupdd.sys (error code 4). Is it required that the hard-disk is formatted before you even put a Windows boot CD in?
View 2 Replies
View Related
Sep 19, 2010
I'm trying to sync a folder between my Windows install and my PCLinux install. Same machine, Windows 7 on the C drive and Linux on an external USB hard drive.
Using the Grsync GUI, I searched for the source and destination folders, and then executed the command. Here is the output:
** Launching RSYNC command (simulation mode): pkexec rsync -r -n -t -v --progress -s /media/Win7/Documents and Settings/Paul/Application Data/The Word file:///root/.wine/drive_c/Program Files/The Word/myData
ssh: connect to host file port 22: No route to host
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: unexplained error (code 255) at io.c(601) [sender=3.0.7]
Rsync process exit status: 255
It seems to be doing an FTP operation, whereas all I need is a file transfer. Can anyone point out my error here?
View 5 Replies
View Related
May 1, 2010
simple scan error as follows: Failed to save file ImageMagick returned error code 11 Command line: convert -adjoin /tmp/simple-scan-DA9MBV.jpg /tmp/simple-scan-XCK4BV.jpg /tmp/simple-scan-NZVYBV.pdf Stdout: Stderr: using karmic note: I have apparmor extra profiles installed but didn't notice one that related to simple scan or imagemagick. Red herring or not?
View 6 Replies
View Related
May 9, 2011
I have just upgraded my ubuntu to 11.04 .After it is done ,I could install any software ,the error is as follows:
E: Sub-process /usr/bin/dpkg returned an error code (1)
I wonder what is the meaning of the error.
View 3 Replies
View Related
Jun 14, 2011
Parse error: syntax error, unexpected '@' in C:xampphtdocsminippromail.php on line 8 .......its not recognizing the '@' symbol. heres the code im working with
<?php $receiver = myfriend@ourmail.co.in; $subject = wish; $content = Hi! My dear friend how are you.; $sender = myself@ ourmail.co.in ; $headers = From: $sender; mail($receiver,$subject, $content,$headers); echo Mail has been sent successfully.; ?>
View 1 Replies
View Related
May 20, 2010
i installed kernel 2.6.34 to fix my lid closing issue, and that went great. but now when i go to reinstall my broadcom i get this error. Code: Reading package lists... Done Building dependency tree Reading state information... Done bcmwl-kernel-source is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu3) ... Removing old bcmwl-5.60.48.36+bdcom DKMS files...
[Code].....
View 9 Replies
View Related
May 10, 2010
Worked around the problems with OpenJDK causing slowness/crashes/CPU-hogging on my system by installing Sun JDK.
Why is Sun's Java deprecated? OpenJDK's buggier than an ant farm in my experience, and every time a Java applet starts in my browser, CPU immediately goes to 100%, and doesn't stop, even when I close the tab that the applet was running in. Only way to stop the CPU from getting hogged is to kill Firefox and restart it.
That or switch to Sun Java instead of OpenJDK.
View 1 Replies
View Related
Jan 5, 2010
my command is the following:cp -LRuvp --reply=yes /mnt/filename /mnt/usbdrive/filename 2>/mnt/usbdrive/ error.log.i get "the reply option is deprecated try using i or f instead" the problem with the above is the only thing i get in my error log is: "the reply option is deprecated try using i or f instead" and if i use "i , f , /cp , etc..." nothing is generated in my log..what i want to do is copy file from source with "LRuvp" to destination and appened out put to "error.log"
View 14 Replies
View Related
Jul 2, 2011
Code: if test -f $1 && test -f $2
then
d=$(diff $1 $2)
if [ $d -eq 0 ][code].....
View 1 Replies
View Related
Jan 5, 2010
I see these boot.log warning and understand that the directory where these config files are kept has (or is) changing. Okay, but is the correct procedure to just move them over from the /etc/modprobe.conf dir to the /etc/modprobe.d file? I am wondering if some changes to those config files or those that they are related to must be also made? A portion of the boot.log is below.
[Code]....
View 14 Replies
View Related
Mar 1, 2010
i got this warning message while booting
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
View 4 Replies
View Related
Jun 30, 2010
My SSL is not working, I get the error I just moved my site off GoDaddy, and on to my own server. I now get this error message. "SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long)"
I'm not sure what that means, or how to fix it. I used these same Security Certificates om my other server, and they worked just fine.
View 2 Replies
View Related
Jan 2, 2011
i want to run this code
[code]...
i have error in graphics. i have C++ 2005
View 4 Replies
View Related
Jan 20, 2011
I am novice. I am trying to create one email form. But i am getting "Parse error: parse error in F:estwampwwwsendmail.php on line 43"
Code:
<?php
if(isset($_POST['email'])) {
[code]....
View 3 Replies
View Related
Jul 13, 2011
I am currently having issues with system freeze when unmounting portable hard drives. This happens almost every single time. Normal USB sticks are fine and do not produce the freeze. I am using kernel 3.0.0-rc6, however the issue also persists when switching back to 2.6.39. This is the error message i get when freeze occurs, reverting to terminal output:
WARNING! power/level is deprecated use power/control instead
Jul 13 18:26:49 destiny kernel: [ 6196.892776] Call Trace:
Jul 13 18:26:49 destiny kernel: [ 6196.892803] [<ffffffffa008feec>] ? scsi_setup_blk_pc_cmnd+0x15/0x104 [scsi_mod]
[Code]...
View 2 Replies
View Related
Jul 3, 2010
I've just updated my linux system (Debian) and went to compile some code I'm working on. However it causes some problems, presumable because of GCC up dates. I get many of my subject line errors for example
../../common/Version_Control.cpp: In function int VersionControl():
../../common/Version_Control.cpp:55: warning: deprecated conversion from string constant to char*
So I check up the error and it comes from my error handler code which is a function
extern void SetError(char *string,int error_number)
The net tells me all I need to do is convert char *string to const char *string, however when I do so and recompile I get the following error
Error_Control.cpp: In function �void SetError(const char*, int)�:
Error_Control.cpp:41: error: invalid conversion from �const char*� to �char*�
make: *** [Error_Control.o] Error 1
I think I've done exactly what's recommended ?
View 3 Replies
View Related
Jan 10, 2011
My problem is that the warning keeps apperaing when I run g++ compilation.
Say, I have a system runtime function with header (imaginary)sysruntime.h: void printfunction(char *line);
Then in my .cpp file, I will include the above header #include <sysruntime.h>
Then, I do the below:
Line12: char *linetoprint = "Print this line";
Line13: printfunction(linetoprint);
But, I will get the warning message "Line12: deprecated conversion from string constant to 'char*'". (Even though it compiles)
My question is how should I declare my char* so that I wont get this warning message, and can still run printfunction(char* line) correctly?
View 7 Replies
View Related
Jul 25, 2015
When trying to install php5 IÂ got the following result. Tried to apt-get clean, autoclean, remove --purge then reinstall the mentioned packages without any success.
dpkg --configure -a didn't get any better result.
Code: Select allsudo apt-get install php5
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances   Â
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés :
 libapache2-mod-php5 php5-cli php5-common
[Code] .....
View 5 Replies
View Related
Nov 18, 2010
I get the following error message starting k3b:
frank@linux-avnb:~> k3b
k3b: symbol lookup error: /usr/lib/libkcddb.so.4: undefined symbol: _ZN9QListData11detach_growEPii
<unknown program name>(26884)/: Communication problem with "k3b" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" :
" "Message did not receive a reply (timeout by message bus)" "
frank@linux-avnb:~>
View 9 Replies
View Related
Nov 30, 2010
I installed Code:Blocks (8.02 from ubuntu software center) and try to run sample program (at first I tried some program related to OpenCV and configure the project for it).
The Build went OK but I cant Run the program. So I tried the simplest progrma of hello World and still I get the same error even on a clean new project.
The Error: "error while loading shared libraries: cv.so can not open shared object file : No such file or directory"
View 1 Replies
View Related
Feb 19, 2011
i've got an HP printer, a new one, and it's got an error code jamming it up. I tried to play musical printers between a windows 7 computer and my own ubuntu computer. this apparently generated the error, and now the printer is no longer working. anyone got a hack or program that can scrub the memory of an hp disk-jet F2480? or should i just throw the thing away and buy a new one?
View 2 Replies
View Related
Aug 22, 2011
Im experiencing issues updating. here is the error update is giving me:Reading database....60%dpkg: unrecoverable fatal error, aborting:files list file for package 'liborbit2' is missing final newlineE: Sub-process /usr/bin/dpkg returned an error code (2)A package failed to install. Trying to recoverNothing happens at this point.
View 4 Replies
View Related
