General :: Configuring Dhcp Server With Authentication?
Apr 23, 2010
is it possible to create a dhcp server which will ask for authentication from client before providing ip to that client ? i am using rhel5 os. i have configured dhcp server and it is working fine.
View 1 Replies
ADVERTISEMENT
May 29, 2010
Im having problem in configuring squid server and applying ncsa authentication
Here is my configuration in squid.cong file
View 6 Replies
View Related
Aug 27, 2010
I am trying to configure dhcp server in linux 5.4 version on VMWare. DHCP is already installed in my machine but I am not able to start the service. Whenever I give service dhcpd start/restart, it gives message:
Starting Failed My configuration file is like this:
[root@chaitu etc]# /etc/init.d/dhcpd start
Starting dhcp: [FAILED]
[root@chaitu etc]# vi dhcpd.conf
ddns-update-style interim;
ignore client-updates; .....
View 6 Replies
View Related
Mar 31, 2011
configuring DHCP server with two NICs. I need DHCP server with 2 NICs:
eth1 - 192.168.103.11
eth2 - 192.168.123.11
The client also has two NICs and suppose to receive ip addresses eth1 from 192.168.103.0 and eth2 from 192.168.123.0 Here is the dhcpd.conf from dhcp server:
ddns-update-style interim;
authoritative;
ignore client-updates;
[code]....
View 2 Replies
View Related
Jan 18, 2010
how to make a new Ubuntu 9.10 box use our LDAP/Samba server for user authentication. Our Red Hat and Windows machines all use it just fine. I've been trying to use the auth-client-config and libnss-ldap packages for this purpose, but I must be missing something. I'm pretty green with LDAP, so this is my first time diving in... Is there a good How-To or step-by-step read on this? All of my searches lead me to setting up Ubuntu as the server, and that isn't what I want. I've also tried the steps listed in [URL] for the LDAP Authentication section.
View 1 Replies
View Related
Jan 4, 2010
I am working with a bare bones lenny that connects fine to an ADSL router using wireless ethernet and a fixed IP. I am trying to reconfigure to use DHCP but it isn't happening.
I'm using the following page as a reference... An introduction to Debian networking setup
ok I modified my /etc/network/interfaces file as follows...
# The primary network interface
allow-hotplug wlan0
iface wlan0 inet dhcp
dpkg --get-selections shows I have the following installed
dhcp3-client install
dhcp-common install
as I understand, that is all that is needed. However when I try to ping the router I get the error network unreachable. ifconfig does not have an inet addr. in the wlan0 section. dmesg | grep dhcp shows nothing at all.
View 12 Replies
View Related
Sep 12, 2011
I configure my server just like on the link found in novell i hope some can help me here. my client is able to recieve DHCP address and everything is working fine on the network how ever my client cannot pullup any website, but my server is able to pullup whats wrong on this one.
Cool Solutions: HOW-TO: Set Up a SUSE 10 Machine As a Router
View 3 Replies
View Related
Aug 25, 2011
I am trying to configure my IPv6 network. My computers are behind a Fedora gateway IPv6-configured, which is working great. But for computers inside my network, it seems I am getting only internal addresses from DHCP. Here is my ifconfig for an internal computer:
Quote: em1 Link encap:Ethernet HWaddr F4:6D:04:34:92:2B inet addr:192.168.0.184 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f66d:4ff:fe34:922b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:744250 errors:0 dropped:0 overruns:0 frame:0 TX packets:548987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:841392242 (802.4 MiB) TX ytes:60384500 (57.5 MiB) Interrupt:18 Memory:f7100000-f7120000
he-ipv6 Link encap:IPv6-in-IPv4 inet6 addr: 2001:470:1c:611::3/64 Scope:Global inet6 addr: fe80::cea7:b778/128 Scope:Link UP POINTOPOINT RUNNING NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:61 dropped:0 overruns:0 carrier:61 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[Code]....
View 2 Replies
View Related
Oct 22, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 6 Replies
View Related
Jul 1, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 2 Replies
View Related
Mar 25, 2010
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
View 2 Replies
View Related
Mar 8, 2010
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies
View Related
Aug 4, 2010
I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies
View Related
Mar 12, 2010
I have a problem with ldap client authentication in ubuntu. I am using rhel5 as openldap server and I configured ubuntu as client, when I am trying to login the following message is coming."su: Authentication service cannot retrieve authentication info. Sorry"
But when I do search through "ldapsearch" command output is coming without any errors, Can anybody explain what would be problem.
View 1 Replies
View Related
Jan 24, 2011
This dhcp server is configured with redhat enterprise edition. I found that logs are generating in the following path /var/log my doubt is how can i setup the logs generating for a specified day.
View 1 Replies
View Related
Jun 29, 2011
When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
View 2 Replies
View Related
Oct 4, 2010
I have configured Master and Slave DNS server in Red Hat Linux 4 Enterprise. I want to know about what is a Caching Nameserver and in which situation we use it? If there is a master and slave DNS server we can use cache name server as well ?
View 7 Replies
View Related
Aug 2, 2011
when i m configuring ldap server on linux 6.0 for my college project with the script below :- problem is that DB_config.example is not available under /usr/share/doc/openldap-servers-2.4.23/
[ for query without SSL ]
# ldapme
# vim /etc/auto.master
[code]....
View 6 Replies
View Related
Feb 25, 2010
I have installed Fedora 9,together with the DNS server.I tried to configure the /etc/named.conf and created my zone files in the /var/named directory.But its giving me errors that it cant find mydomain�s zone files.
How do I go about,or can u assist me with the full steps on configuring a DNS server on the Fedora9
View 1 Replies
View Related
May 27, 2011
I have a network and am using squid proxy with authentication I want to create another subnet without authentication.
View 1 Replies
View Related
Apr 7, 2011
I am totally new to Linux and have just installed ubuntu 10.10. After configuring the network interface via dhcp I started getting these messages that come in so frequently I can't configure anything else.
[87.186415] Stack:
Why I am getting this messages and more importantly how do I get rid of them.
The installation is on a VM on Hyper-V.
View 1 Replies
View Related
Apr 30, 2010
provide me the steps for configuring the DNS server on RHEL 5.2.I did the DNS configuration on RHEL 4.7 it worked fine but as i see in RHEL 5.2 the named.conf file is different and i am confused.
machine ipaddress = 192.168.0.1
Domain name = testing.com
please provide me with the steps on how to edit the named.conf file and zone entries.
View 6 Replies
View Related
Jul 14, 2011
I am trying to set up a DHCP server for a network that does not go on the internet using fedora 14. I have tried several site and every one I look at has a different dhcpd.conf file. I have tried many and every time I try to start the service they fail. Like I said it does not go on the internet. No matter what I do when I try to start the dhcpd service it fails[root@pcrepair ~]# service dhcpd startStarting dhcpd: [FAILED]here is my current config file
# specify domain name
option domain-name
"server.world";
[code]....
View 1 Replies
View Related
Apr 16, 2010
I want to create a dedicated DHCP server in Red Hat Linux for a small office with a private range from 192.168.1.10 to 192.168.1.20
View 10 Replies
View Related
Mar 27, 2010
How to install DHCP server in ubuntu 9.10, i googled but not able to find correct how to. if anyone installed provide steps in configuring dhcp3.conf file
View 1 Replies
View Related
Apr 6, 2009
I'm trying to do a red hat Advanced server 4 update 7 install using a kick start file on the network. The server with the kickstart file and dvd contents is on the same subnet as the server receiving the install. We have done it before in the past just fine using:linux nofb text ks=http://serverip/path at the boot/install screen. After that the ip address info is entered manually and the kickstart does its thing. When doing this with update 7, the install acts like a regular install. When i check the http access logs on the other server, it shows no access from the server receiving the install.I have tried adding an ip address to the install command. Such as:
View 2 Replies
View Related
Jul 2, 2010
The DHCP server on a network I use specifies a DNS server that I do not want to use. Is there a way to continue to use DHCP but to modify the provided information or to "blacklist" one (of the three provided) DNS servers?
The client in question is running Ubuntu 10.04. Networking is managed by NetworkManager but I'm not wedded to that. In fact, I don't like it and wouldn't mind a reason to use something else.
View 1 Replies
View Related
Aug 10, 2011
Does anyone know how to install the DHCP Server for the DSL 4.4.10 version. Cant find installation instructions anywhere.
View 1 Replies
View Related
Oct 14, 2010
commands to create a DHCP server in RHEL 5.1
View 3 Replies
View Related
Aug 16, 2010
I am trying to set up a DUAL WAN Load balancer on linux. All i want is just the dual wan loadbalancing and nothing else not even the firewall service. Also what would be the ideal configration for that system
View 2 Replies
View Related