General :: Use A Kickstart File For Red Hat With No Dhcp Server?
Apr 6, 2009
I'm trying to do a red hat Advanced server 4 update 7 install using a kick start file on the network. The server with the kickstart file and dvd contents is on the same subnet as the server receiving the install. We have done it before in the past just fine using:linux nofb text ks=http://serverip/path at the boot/install screen. After that the ip address info is entered manually and the kickstart does its thing. When doing this with update 7, the install acts like a regular install. When i check the http access logs on the other server, it shows no access from the server receiving the install.I have tried adding an ip address to the install command. Such as:
View 2 Replies
ADVERTISEMENT
Feb 1, 2010
I'm using RHEL 5.4 and trying to use the system-config-kickstart to generate a ks.cfg file with all the settings already appeneded. After running the "system-config-kickstart --generate ks.cfg" command, the file gets created but it's missing the firewall configuration, partition information and so on.
How can these settings also be generated with the system-config-kickstart?
View 1 Replies
View Related
Apr 29, 2010
I am currently trying to add a new user on a linux box in the %post section of the kickstart file. The user however doesn't get created after I reboot the box after install. Am I missing anything ?Just for info. I am installing RHEL5.4 on a 64 bit box, I know this should not matter, but what the heck!!
View 4 Replies
View Related
Nov 8, 2010
I m facing a problem from few days i try to sort it out but i fail to overcome from this problem .
i configure a pxe boot server and mount the RHEL iso to /bootins/tree directory
Then after i created a /kick/client.cfg kickstart file. and share both the directory /bootins/tree and /kick with nfs
below is the entry of my /etc/exports directory
/bootins/tree 192.168.10.0/24(rw,sync)
/kick 192.168.10.0/24(rw,sync)
my client machine can successfully boot from the server but after booting an error msg is come, the msg is unable to load a kickstart file , i dont know why this happens coz i can successfully mount both the above share from another linux machine but dont know why at booting time this msg is appears firewall is off
View 1 Replies
View Related
Jan 6, 2010
I have downloaded the following kickstart file for installing minimal < 300 MB space centOS 5.2. I have created a Virtual Machine for Linux and attempting to install CentOS.here is my kickstart file:
Code:
# Kickstart file
#
[code]....
View 3 Replies
View Related
Nov 17, 2010
I'm trying to set up a PXE boot server on a PC running Slackware 13.0 using the default apps and info shipped with that Slackware version but to no avail...Carefully reading the Slackware 13.0 README_PXE I've put together this dhcpd.conf file:
# dhcpd.conf
#
# Configuration file for ISC dhcpd (see 'man dhcpd.conf')
[code]....
View 6 Replies
View Related
Mar 18, 2010
I'm unable to create a linux boot cd with a kickstart file. I have a working kickstart file and a working boot image (tested by booting using the network for the kickstart file), but I can't seem to put them both on the DVD.
Here are the steps I took
1. mount the *.iso file to /mnt/isosetups
2. Recursively copy all the files from /mnt/isosetups to /mnt/bootcd
3. removing /mnt/bootcd/isolinux/boot.cat
4. running the mkisofx command (used -c to recreate boot.cat)
5. put the new image on a windows box and burned to a dvd using roxio
The result was that I could enter the red hat boot menu but the server couldn't find the boot image on the cd. I could go into more detail about what commands I entered, my environment, what I tested, etc.
View 1 Replies
View Related
Mar 2, 2011
is possible to edited the default RHEL CD to have it automatically install RHEL based off of a kickstart file that I will store locally on the CD. My plan would be to put a cd in a server and have the OS automatically being installed.
View 3 Replies
View Related
Jul 7, 2009
What I am trying to do is log IP Address, MAC Address and the host name for records. So I can have a record of what PC got which IP address and when they got it. So far my search has yielded no results. It would not be that big of a deal as I could always look at the dhcp file, but it is generated dynamically (3rd party application using RADIUS and each user gets a host).
subnet 208.x.x.0 netmask 255.255.255.0 {
option routers 208.x.x.1;
option subnet-mask 255.255.255.0;
[code]....
View 6 Replies
View Related
Oct 22, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 6 Replies
View Related
Jul 1, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 2 Replies
View Related
Mar 25, 2010
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
View 2 Replies
View Related
Mar 8, 2010
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies
View Related
Aug 4, 2010
I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies
View Related
Mar 18, 2010
I have been using a boot disk with a kickstart file that calls rpm files that are on RHEL4.8. The rpm files tk-devel,tcl-devel,nss-devel and nspr-devel respond back during the install of RHEL5.e with a pop-up saying they do not exist,but when I look on the RHEL5.4 DVD they do exist in the Workstation directory.
View 1 Replies
View Related
Jan 24, 2011
This dhcp server is configured with redhat enterprise edition. I found that logs are generating in the following path /var/log my doubt is how can i setup the logs generating for a specified day.
View 1 Replies
View Related
Jul 14, 2011
I am trying to set up a DHCP server for a network that does not go on the internet using fedora 14. I have tried several site and every one I look at has a different dhcpd.conf file. I have tried many and every time I try to start the service they fail. Like I said it does not go on the internet. No matter what I do when I try to start the dhcpd service it fails[root@pcrepair ~]# service dhcpd startStarting dhcpd: [FAILED]here is my current config file
# specify domain name
option domain-name
"server.world";
[code]....
View 1 Replies
View Related
Apr 16, 2010
I want to create a dedicated DHCP server in Red Hat Linux for a small office with a private range from 192.168.1.10 to 192.168.1.20
View 10 Replies
View Related
Mar 27, 2010
How to install DHCP server in ubuntu 9.10, i googled but not able to find correct how to. if anyone installed provide steps in configuring dhcp3.conf file
View 1 Replies
View Related
Jul 2, 2010
The DHCP server on a network I use specifies a DNS server that I do not want to use. Is there a way to continue to use DHCP but to modify the provided information or to "blacklist" one (of the three provided) DNS servers?
The client in question is running Ubuntu 10.04. Networking is managed by NetworkManager but I'm not wedded to that. In fact, I don't like it and wouldn't mind a reason to use something else.
View 1 Replies
View Related
Aug 10, 2011
Does anyone know how to install the DHCP Server for the DSL 4.4.10 version. Cant find installation instructions anywhere.
View 1 Replies
View Related
Oct 14, 2010
commands to create a DHCP server in RHEL 5.1
View 3 Replies
View Related
Aug 16, 2010
I am trying to set up a DUAL WAN Load balancer on linux. All i want is just the dual wan loadbalancing and nothing else not even the firewall service. Also what would be the ideal configration for that system
View 2 Replies
View Related
Aug 12, 2010
I am trying to configure a computer to make it as DHCP server.Well, my current connection is PPPOE.So, I should assign one interface to connect as PPPOE, and the other will be broadcast DHCP server.What configuration shall I apply to the dhcp.conf file?
View 3 Replies
View Related
Apr 23, 2010
is it possible to create a dhcp server which will ask for authentication from client before providing ip to that client ? i am using rhel5 os. i have configured dhcp server and it is working fine.
View 1 Replies
View Related
May 23, 2011
I can't figure out how to copy a file off a custom RHEL 5 DVD that I created with kickstart after the installation completes and the %post runs. I don't want to run as "%post --no-chroot" because I have a script of system changes that needs to run in chroot. I just want to copy one RPM file into the /tmp so my script can install it. Can I have two %posts, one with chroot and one without? I can't seem to find any RHEL 5.5+ guides for kickstart that can explain to me how to make it work.
View 5 Replies
View Related
May 6, 2010
I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.
View 1 Replies
View Related
May 31, 2010
I have a network consisting mostly of Windows Vista and 7 clients and an Ubuntu server. The server provides both the DHCP and NTP services through dhcp3-server and openntpd. In my dhcpd.conf, the subnet is declared as follows:
subnet 10.10.10.0 netmask 255.255.255.0 {
range 10.10.10.10 10.10.10.200;
option broadcast-address 10.10.10.255;
option routers 10.10.10.1;
option ntp-servers 10.10.10.1;
The clients don't seem to be using the NTP server though. When I capture the network traffic with Wireshark during the DHCP process, I also see no mention of the NTP option in the DHCP offer message. I am not quite sure if the clients would have to specifically request that option to receive it or if I have to make another configuration to offer the option.
View 1 Replies
View Related
Dec 30, 2010
I have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a) reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b) calling their tech support (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?
View 1 Replies
View Related
Jun 2, 2011
how to configure dhcp server in a local lan network
View 2 Replies
View Related
