Debian :: Configuring Lenny To Use DHCP?
Jan 4, 2010
I am working with a bare bones lenny that connects fine to an ADSL router using wireless ethernet and a fixed IP. I am trying to reconfigure to use DHCP but it isn't happening.
I'm using the following page as a reference... An introduction to Debian networking setup
ok I modified my /etc/network/interfaces file as follows...
# The primary network interface
allow-hotplug wlan0
iface wlan0 inet dhcp
dpkg --get-selections shows I have the following installed
dhcp3-client install
dhcp-common install
as I understand, that is all that is needed. However when I try to ping the router I get the error network unreachable. ifconfig does not have an inet addr. in the wlan0 section. dmesg | grep dhcp shows nothing at all.
View 12 Replies
ADVERTISEMENT
Aug 27, 2010
I am trying to configure dhcp server in linux 5.4 version on VMWare. DHCP is already installed in my machine but I am not able to start the service. Whenever I give service dhcpd start/restart, it gives message:
Starting Failed My configuration file is like this:
[root@chaitu etc]# /etc/init.d/dhcpd start
Starting dhcp: [FAILED]
[root@chaitu etc]# vi dhcpd.conf
ddns-update-style interim;
ignore client-updates; .....
View 6 Replies
View Related
Apr 23, 2010
is it possible to create a dhcp server which will ask for authentication from client before providing ip to that client ? i am using rhel5 os. i have configured dhcp server and it is working fine.
View 1 Replies
View Related
Sep 12, 2011
I configure my server just like on the link found in novell i hope some can help me here. my client is able to recieve DHCP address and everything is working fine on the network how ever my client cannot pullup any website, but my server is able to pullup whats wrong on this one.
Cool Solutions: HOW-TO: Set Up a SUSE 10 Machine As a Router
View 3 Replies
View Related
Mar 31, 2011
configuring DHCP server with two NICs. I need DHCP server with 2 NICs:
eth1 - 192.168.103.11
eth2 - 192.168.123.11
The client also has two NICs and suppose to receive ip addresses eth1 from 192.168.103.0 and eth2 from 192.168.123.0 Here is the dhcpd.conf from dhcp server:
ddns-update-style interim;
authoritative;
ignore client-updates;
[code]....
View 2 Replies
View Related
Aug 25, 2011
I am trying to configure my IPv6 network. My computers are behind a Fedora gateway IPv6-configured, which is working great. But for computers inside my network, it seems I am getting only internal addresses from DHCP. Here is my ifconfig for an internal computer:
Quote: em1 Link encap:Ethernet HWaddr F4:6D:04:34:92:2B inet addr:192.168.0.184 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f66d:4ff:fe34:922b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:744250 errors:0 dropped:0 overruns:0 frame:0 TX packets:548987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:841392242 (802.4 MiB) TX ytes:60384500 (57.5 MiB) Interrupt:18 Memory:f7100000-f7120000
he-ipv6 Link encap:IPv6-in-IPv4 inet6 addr: 2001:470:1c:611::3/64 Scope:Global inet6 addr: fe80::cea7:b778/128 Scope:Link UP POINTOPOINT RUNNING NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:61 dropped:0 overruns:0 carrier:61 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[Code]....
View 2 Replies
View Related
Dec 14, 2009
i was trying to use gnome and kde but i don't like them. I tried xfce and it seem to fit my needs but.My computer is used to be powered on for a weeks. While time passes, a process xfdesktop begin to use more and more memory and to free RAM i need to log out and log in again.
I tried squeeze yesterday on my virtual machine and it has 4.6 and seem not to have that bug, RAM usage is static(yes it still works when i write this and have memory usage 34492k, which is not changing for an hours of usage already), also 4.6 is MUCH better than 4.4.
i already tried adding squeeze to "sources.list" but i can see too many dependencies which should be upgraded if i install 4.6, i'm beginning to afraid it can crash entire GUI(or entire system, i can see there is libc6 required to be updated).
View 14 Replies
View Related
Apr 7, 2011
I am totally new to Linux and have just installed ubuntu 10.10. After configuring the network interface via dhcp I started getting these messages that come in so frequently I can't configure anything else.
[87.186415] Stack:
Why I am getting this messages and more importantly how do I get rid of them.
The installation is on a VM on Hyper-V.
View 1 Replies
View Related
Jan 18, 2010
i do have a strange problem get running php5 on lenny 64 inside apache2. i had installed it as all instructions on the web does: # apt-get install php5 libapache2-mod-php5 php5-cli php5-common php5-cgi
apt has enabled php automatically, so
/etc/apache2/mods-enabled/php5.conf does have inside:
<ifmodule mod_php5.c>
AddType application/x-httpd-php .php .phtml .php3
AddType application/x-httpd-php-source .phps
</ifmodule>
[Code]...
View 3 Replies
View Related
Aug 20, 2010
is it save to install linux kernel 2.6.35.2 on Debian Lenny 5.0.5 or stick with automatic updates...
View 14 Replies
View Related
Nov 4, 2010
I have added a 10 Mbps network card to my SGI O2 MIPS workstation running Debian Lenny running the 26-2 kernel. The workstation already has an onboard NIC which is working fine.(eth0).
lspci -v shows ths card as:-00:03.0 Ethernet controller: Compex ReadyLink 2000 (rev 0a) Flags: medium devsel, IRQ 18 I/O ports at 1800 [disabled] [size=32] Upon googling I found out that this card is an NE2000 clone. I downloaded the latest 2.6.36 kernel sources and did the following:-
1. Make Menuconfig
2. Loaded an alternate kernel config file (my working kernel config file)
3. In DeviceDrivers->Network device support->Ethernet (10 or 100 Mbit)
I selected ASIX AX88796 as the help associated with this showed it as an NE 2000 clone. configured it to be a module and did make, make_modules and make_install. Edited /etc/Modules to load ax88796 and added an alias eth1 ax88796 to this file. copied the new kernel to the /boot and did a reboot, the machine booted up fine and udev -r showed the 2.6.36 kernel and lsmod showed ax88796 loaded. But, Iam not able to bring up eth1 using:-
ifup eth1
The error messages given are:-
SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
[Code]...
View 1 Replies
View Related
Apr 23, 2010
I installed debian etch on my system. Installation done successfully, but when it boots up the X server is not starting and showing error. Note : It is perfectly working with debian lenny. Configuration : Intel DG41RQ ,1GB Ram ,160GB HDD.
View 1 Replies
View Related
Aug 28, 2010
Are exist any repository for debian lenny with games like nexuiz vdrift planeshift etc?
View 2 Replies
View Related
Dec 18, 2010
I could't find the 64bit Debian Lenny OS for Intel architecture.Hence I have installed amd64 and it is working fine.Does both intel and amd have the same 64 bit OS amd64 ?
View 3 Replies
View Related
Mar 24, 2010
i recently moved away from ubuntu (as they wouldn't let me change my gdm themes lol) i installed lenny usin the net install for ia86 but i cannot change my screen resolution from 1024x768 to my card/monitors native setting of 1366x768 i have included a .txt taken from the benchmark an profile gizmo which i hope rovide any of you with all the info needed (to be honest i don't understand half of it) my laptop is a fujitsu amilo li3710 with dual core, 3gb ram an 160gb hd an a intel gma4500 with shared memory graphics
View 2 Replies
View Related
May 3, 2010
I'm trying to install Debian/Lenny on a iBook clamshell. I couldn't seem to burn an install CD that the iBook would recognize, so I eventually copied the contents of the CD onto a self-powered USB drive and I can now get the iBook to boot off of that thru open firmware. However, when I get to the Debian installer main menu, it still won't read the CD, and apparently it does not have network drivers to install over Ethernet. Is there any way I can supply a driver for the ethernet interface (lspci reports that its a sun GEM ethernet interface) or somehow convince the installer to install from the content of the USB drive (which is a duplicate of what's on the installer CD)? Heck, if it'd be easier to get the Airport interface running to reach the Internet I'd be up for that too.
View 1 Replies
View Related
Apr 14, 2010
I have read tons of articles on how but none work. I have edited the source.list file with what they say and I have used all the terminal commands that are becoming very repetitive.
View 11 Replies
View Related
Oct 2, 2009
is there a way to auto login as root? login in window preferences won't allow me to select rootPS before anyone starts on the me bad, I'm a programmer using it on a closed embedded system, and need to link to others software, and need to be root
View 6 Replies
View Related
Aug 9, 2009
Can't seem to figure out how grml is stopping the auto-dhcp during boot by default in grml network is disabled. I tried init.d, inittab, or whatever I cannot seem to find anything? I need eth0 to come up automatically at boot grml, for some reason won't remember my net setup and must re-setup at every boot? How can I make it do that?
View 5 Replies
View Related
Apr 16, 2010
I installed Debian Lenny on my old IBM thinkpad R40e but i can't change the brightness either with the Fn keys or with the brightness control debian has. i have searched around and it seems to be a problem with linux on IBM thinkpads but i don't know that much about this sort of thing so any help would be appreciated. if you need any more info then just ask.
View 9 Replies
View Related
Aug 31, 2010
Most of the time I rebooting, my resolv.conf is getting updated by resolvconf program, so the network connection cannot be reached. I followed this: Debian User Forums - View topic - Solving DNS problem (dhclient & resolv.conf)
View 7 Replies
View Related
Aug 21, 2009
Could anyone tell me how to get Debian Lenny to automount CDs the same as Ubuntu does i.e. automatically, with a Desktop icon etc.I've worked out how to automount CDs using autofs, which is OK, but it still doesn't seem quite as good as the way Ubuntu does it.
View 6 Replies
View Related
Mar 29, 2011
I have problem with loging, actually iptables logs a data but it seems that for some reasons does not writes in a log file:
Code:
iptables -L -v
Chain INPUT (policy ACCEPT 406 packets, 124K bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT tcp -- any any xxxxxxxxxxx anywhere tcp dpt:xxxx
[Code]....
i checked /var/log/message and /var/log/syslog nothing is here related to iptables. then i create separate file for Iptables by adding this: kern.warning /var/log/iptables.log in my rsyslog.conf it does create iptables.log file inside /var/ but its still empty
View 4 Replies
View Related
Aug 16, 2010
I've found that I need to use pppoeconf, but it doesn't work. I have default Debian kernel with PPPOE module. After looking for the modem it gives me the following message:"Sorry, I scanned 1 interface, but the Access Concentrator of you provider did not respond. Please check your network and modem cables. Another reason for the scan failure may also another pppoe process which controls the modem."pppoeconf detected the interface successfully (eth0, I have only one interface), but doesn't work. It does, however, work with my router connecting without any issues.
View 4 Replies
View Related
Apr 2, 2010
User familai with amd64 for computational chemistry and i386 for desktop. Seeking advice from users who succeeded in arranging a laptop with Debian squeeze or lenny, wireless LAN, 3D acceleration video, flash for speech. The laptop WITH STANDARD USA KEYBOARD should be available from European market resellers.
View 1 Replies
View Related
Feb 8, 2010
first: PXE flawless bind to dhcp address but put next binding state to free second: when installer calls init script to reinit ethernet driver (e1000 (vmware)) binding fails 11.2 opensuse fail to reinit dhcp with log entry "no free leases" third: when manual set network install works how to preserve dhcp lease on reinit of driver?
View 1 Replies
View Related
Oct 22, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 6 Replies
View Related
Jul 1, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 2 Replies
View Related
Mar 25, 2010
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
View 2 Replies
View Related
Mar 8, 2010
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies
View Related
