General :: Configure DHCP Server In Red Hat?
Apr 16, 2010I want to create a dedicated DHCP server in Red Hat Linux for a small office with a private range from 192.168.1.10 to 192.168.1.20
View 10 Replies
ADVERTISEMENT
Networking :: Configure A (openSUSE) Client To Dhcp To EBox DHCP Server - Lease An IP Address
Mar 25, 2010I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
General :: Configure Dhcp Server In A Local Lan Network?
Jun 2, 2011how to configure dhcp server in a local lan network
View 2 Replies View RelatedServer :: Configure One RHEL With DNS And DHCP
Jul 30, 2010I have installed RHEL 5.1 in VMWare 6 I want to configure one RHEL Server with DNS & DHCP Also I would like to PXE boot, whenever I create a new VMWare Client(RHEL), the installation should be initiated via network boot
View 2 Replies View RelatedServer :: How To Configure DHCP In RHEL 5
Jul 5, 2010here to learn some good technical stuffs
View 6 Replies View RelatedFedora Servers :: How To Configure DHCP Server
Aug 3, 2009How to configure DHCP server on Fedora?Is there any package available on Fedora 11 ?
View 5 Replies View RelatedDebian :: Configure Dhcp Server But Without Success?
Apr 5, 2010i'm trying to configure my dhcp server but without success. i've installed dhcpd apt-get install dhcpd-server then i've added the following line to my dhcpd.conf
host foo{
hardware ethernet 00:00:24:C9:5A: D0;
fixed-adress 169.254.81.51;
filename "pxelinux.0";
[Code]...
Red Hat / Fedora :: Configure A Dhcp Server On RHEL 5.3 Or 14
May 1, 2011i'd like to configure a dhcp server on my RHEL 5.3 or Fedora 14, since i don' have a legitimate DNS server....n it asks for option domain-name " "what do i put in there.. me got two nics for my WAN(dhcp enabled) n LAN...i just want to parctice at home for my future job...
View 3 Replies View RelatedNetworking :: Configure To Use A Specific DHCP Server?
Jan 24, 2010This is probably an odd request, but figured I'd ask in case someone knew. We have a lab that has the IP range 172.10.0.0/16 (255.255.0.0). The lab gateway/DHCP assigns an IP in the range of 172.10.0.2-172.10.0.254. I want to set up my own DHCP server on a specific range, for example 172.10.10.1-172.10.10.254. I create a new host fine, but since it's set for DHCP, it uses the DHCP server at 172.10.0.1. Is there a way to force it to use a different DHCP server on the client side? I realize that I can work around this with exclusions on the 172.10.0.1 DHCP server, or use iptables to deny DHCP requests to specific MACs, but wanted to know if there was an (easier?) way to configure the client to use the 172.10.10.1 DHCP server instead of the 172.10.0.1 server?
View 1 Replies View RelatedNetworking :: Configure Dhcp Server On Centos?
Feb 9, 2010how to configure DHCP server on centos linux and how to configure FTP server on centos linux
View 2 Replies View RelatedRed Hat :: Configure DHCP Client To Register Itself To DNS Server?
Aug 23, 2010I'm a newbie to Linux and need some help in DHCP client configuration.
I'm trying to find a way to set hostname at the start up and get the DHCP client to register itself after it received an IP address.
Debian Configuration :: How To Configure A DNS / DHCP / Directory Server
Jan 17, 2016Setup a DNS/DHCP/Directory server on Debian? I would like to configure the things in Debian so that can join Linux and Windows(if possible as m not sure yet) clients to the directory server. Any links to setup both Forward and Reverse lookup zone in the environment.
View 4 Replies View RelatedServer :: Configure/Setup DHCP, TFTP Servers?
Feb 23, 2010I've tried to configure DRBL server to use Clonezilla and that is required me to setup DHCP, TFTP servers.But I've gotten a lot of errors from them - so please look at my attachments from /var/log/messages and dhcpd.conf - help me to find out what are wrong with them.
[Code]...
Ubuntu Networking :: Configure A DHCP Server But When Try To Start It It Just Fails?
Jan 10, 2010I'm trying to configure a DHCP server but when I try to start it it just fails.
Code:
log
Jan 10 16:25:52 SRV-LINUX00 dhcpd: Copyright 2004-2008 Internet Systems Consortium.
[code]....
Ubuntu Networking :: Configure Second Ethernet Card For A Dhcp/dns Server?
Mar 2, 2010i already have an eth0 configured to automatically get its info from dhcp.
but i wanna configure eth1 to be able to serve dhcp and dns. i havent configured either dns or dhcp server on the server box since i have not configured the serving interface.
so far my interfaces file is:
Code:
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
[Code]....
Networking :: Configure Dhcp Server - Ip Is Not Getting Assigned To Client Machine
Nov 1, 2010i hav configure dhcp server. but the ip is not getting assigned to my client machine.
View 3 Replies View RelatedCentOS 5 Networking :: Configure DHCP Client To Register Itself To DNS Server?
Aug 23, 2010I'm new to CentOS and has recently use it.
I'm looking for a way to configure DHCP client so it would dynamically set the hostname and register itself to a DNS server. I don't have access to the DNS server.
Debian Multimedia :: Recording Screen - Install/configure A Server - Dns - Dhcp
Feb 7, 2011I need to install/configure a server (dns, dhcp, etc) and since im running Debian I want to configure a Debian server, but i want to do it on a virtual machine, cause i dont want to have all that stuff on my system, now Im wondering whats the best screen recorder that i can use on Debian for this purpose.
View 3 Replies View RelatedUbuntu Networking :: DHCP Server Which Does Not Configure The Default Gateway Parameter
Jun 29, 2011I need to place an Ubuntu machine on a network where I have a DHCP server which does not configure the Degault Gateway parameter (we don't want ordinary users to browse the internet). Is it possible to leave the machine using DHCP and define the Default Gateway manually (as in Windows XP i.e.)? How?
View 1 Replies View RelatedGeneral :: How To Configure Dhcp Client
Aug 13, 2010I'm trying to configure in fedora 13 a dhcp client that would request IP address on my finished DHCP test server.
I've already configured dhcp on eth0 on the client machine,
here is the configuration on my DHCP test server
default-lease-time 600;
max-lease-time 7200;
ddns-update-style none;
authoritative;
option domain-name "sample.testnet.com";
[Code]....
Ubuntu Servers :: Ubuntu Server Edition Was Unable To Configure DHCP During Install?
Apr 12, 2010I am trying to install Ubuntu server edition on an old HP XT963 that recently came into my possession. I mainly just wanted to use it as a home file server and print server. I have been running ubuntu desktop on my laptop for a little under a year, but this is my first go at the server edition.
While ubuntu was installing it said "network autoconfiguration failed," I hit continue, thinking I could figure out how to configure it later. After lots of googling I still haven't figured out what exactly is wrong.
Code:
auto lo
iface lo inet loopack
after googling around I made it look like:
[Code]...
I would like to provide more information such as ifconfig and any other commands but I'm not exactly sure how I would do that without being able to copy/paste. I guess I would have the command dump the output to a file, but I'm not familiar with the -options this being my first time CLI-only.
Ubuntu Networking :: DHCP Server No Longer Responses To DHCP Requests - Can't Ping Gateway
Oct 22, 2010Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Ubuntu Networking :: DHCP Server No Longer Responds To DHCP Requests - Can't Ping Gateway
Jul 1, 2010Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Ubuntu Networking :: If DHCP Not Available - Fallback And Start DHCP Server?
Mar 8, 2010Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies View RelatedUbuntu Servers :: DHCP Server And DHCP Client Simultaneously?
Aug 4, 2010I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies View RelatedServer :: Setup Dhcp Logs In Dhcp Server ?
Jan 24, 2011This dhcp server is configured with redhat enterprise edition. I found that logs are generating in the following path /var/log my doubt is how can i setup the logs generating for a specified day.
View 1 Replies View RelatedUbuntu Installation :: Couldn't Configure DHCP
Sep 9, 2010I am a web designer and don't know anything about servers. My server service provider use Linux environment and sometime it would be much easier for me to have a local server to test my websites. So I have install a fresh copy of Ubuntu 10.04 to one of my computer. Half way installation, the system tell me something like couldn't configure the DHCP, I have checked that my router has enabled DHCP servers (D-Link 615). After installation and logon, I use sudo pppoeconf command and try to set the network.
But it said something like no PPPoE access. I know I am very dull, and maybe get ban from this forum because I have not read the instruction, it will be great if you can point me to the right page. All I want to do is have something like a web space + MySQL and support PHP to work with.
General :: DHCP Server With Fedora 14?
Jul 14, 2011I am trying to set up a DHCP server for a network that does not go on the internet using fedora 14. I have tried several site and every one I look at has a different dhcpd.conf file. I have tried many and every time I try to start the service they fail. Like I said it does not go on the internet. No matter what I do when I try to start the dhcpd service it fails[root@pcrepair ~]# service dhcpd startStarting dhcpd: [FAILED]here is my current config file
# specify domain name
option domain-name
"server.world";
[code]....
General :: How To Install Dhcp Server
Mar 27, 2010How to install DHCP server in ubuntu 9.10, i googled but not able to find correct how to. if anyone installed provide steps in configuring dhcp3.conf file
View 1 Replies View RelatedNetworking :: Configure Dhcp To Give Front Numbers?
Jan 12, 2011I setup DHCP on CentOS 5.5. My issue is whenever my client leases, the server gave the last available IP. eg. my dhcp ip range is 192.168.1.10 to 192.168.1.100, the server gave me 192.168.1.100, then 192.168.1.99 for the second machine. How to configure the dhcp to give the front numbers, eg 192.168.1.10 first, then 192.168.1.11 and so on. Then on option domain-name-servers 8.8.8.8; how can I include second nameserver ? 8.8.4.4 See below for my dhcpd.conf
[Code].........