I am trying to configure dhcp server in linux 5.4 version on VMWare. DHCP is already installed in my machine but I am not able to start the service. Whenever I give service dhcpd start/restart, it gives message:
Starting Failed My configuration file is like this:
[root@chaitu etc]# /etc/init.d/dhcpd start
Starting dhcp: [FAILED]
[root@chaitu etc]# vi dhcpd.conf
ddns-update-style interim;
ignore client-updates; .....
is it possible to create a dhcp server which will ask for authentication from client before providing ip to that client ? i am using rhel5 os. i have configured dhcp server and it is working fine.
View 1 Replies View RelatedI have attempted to set up ubuntu server 10.10 on my home network. I only have one computer and access to windows is a must for me, so what I have been doing is installing the server via VMware as a virtual server. Now, I have been able to successfully set up a server that works on the LAN, but for some reason I have been unable to get access to the server via the external ip address.
I will list all known information about my network, host computer and VMware.
I'm currently using VMware Workstation. For the virtual machine I have installed, I have allocated 500 GB of space to a partition on my 2 TB external hard drive. The network is currently set to NAT, but I would much prefer to Bridge the network so that the guest would be assigned a unique LAN address.
The host computer is a laptop. It is connected to the internet through a wireless router. I can successfully host a teamspeak server that accepts incoming traffic from the internet. The operating system that is installed is Windows Vista.
The network is set up as follows:
The host's LAN address is 192.168.1.50 and is connect to the Router which has an address of 192.168.1.1. I am using a Netgear WNDR3300v1 wireless router. The webserver itself would likely have the IP 192.168.1.2 in the circumstance that the network was bridged for the virtual machine. So the WAN Interface would be the modem my company has provided which has assiged the external IP 24.113.92.228. The modem is a cable modem, the brand is a motorola surfboard.
configuring DHCP server with two NICs. I need DHCP server with 2 NICs:
eth1 - 192.168.103.11
eth2 - 192.168.123.11
The client also has two NICs and suppose to receive ip addresses eth1 from 192.168.103.0 and eth2 from 192.168.123.0 Here is the dhcpd.conf from dhcp server:
ddns-update-style interim;
authoritative;
ignore client-updates;
[code]....
I am trying to configure my IPv6 network. My computers are behind a Fedora gateway IPv6-configured, which is working great. But for computers inside my network, it seems I am getting only internal addresses from DHCP. Here is my ifconfig for an internal computer:
Quote: em1 Link encap:Ethernet HWaddr F4:6D:04:34:92:2B inet addr:192.168.0.184 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f66d:4ff:fe34:922b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:744250 errors:0 dropped:0 overruns:0 frame:0 TX packets:548987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:841392242 (802.4 MiB) TX ytes:60384500 (57.5 MiB) Interrupt:18 Memory:f7100000-f7120000
he-ipv6 Link encap:IPv6-in-IPv4 inet6 addr: 2001:470:1c:611::3/64 Scope:Global inet6 addr: fe80::cea7:b778/128 Scope:Link UP POINTOPOINT RUNNING NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:61 dropped:0 overruns:0 carrier:61 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[Code]....
I am working with a bare bones lenny that connects fine to an ADSL router using wireless ethernet and a fixed IP. I am trying to reconfigure to use DHCP but it isn't happening.
I'm using the following page as a reference... An introduction to Debian networking setup
ok I modified my /etc/network/interfaces file as follows...
# The primary network interface
allow-hotplug wlan0
iface wlan0 inet dhcp
dpkg --get-selections shows I have the following installed
dhcp3-client install
dhcp-common install
as I understand, that is all that is needed. However when I try to ping the router I get the error network unreachable. ifconfig does not have an inet addr. in the wlan0 section. dmesg | grep dhcp shows nothing at all.
I have installed fc12 on my core2due machine, and I have installed the vmware server on it, its rpm is installed successfully with out any error, after that a message is displayed
The installation of VMware Server 2.0.2 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "rpm -e VMware-server".
Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".
I tried this command and find the this message
[Akram@localhost Downloads]$ su -c "/usr/bin/vmware-config.pl" Password: Making sure services for VMware Server are stopped.
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] yes
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
Your kernel was built with "gcc" version "4.4.2", while you are trying to use "/usr/bin/gcc" version "4.4.3". This configuration is not recommended and VMware Server may crash if you'll continue. Please try to use exactly same compiler as one used for building your kernel. Do you want to go with compiler
"/usr/bin/gcc" version "4.4.3" anyway? [no] yes
What is the location of the directory of C header files that match your running kernel?[/usr/src/linux/include]
Now it asks me in last lines that "What is the location of Directory of C header files that match your running kernal?"
I configure my server just like on the link found in novell i hope some can help me here. my client is able to recieve DHCP address and everything is working fine on the network how ever my client cannot pullup any website, but my server is able to pullup whats wrong on this one.
Cool Solutions: HOW-TO: Set Up a SUSE 10 Machine As a Router
I want to know the configuration steps for 2 mail servers on diferent IPs. But I want this setup on single vmware machine(debian).
View 3 Replies View RelatedBack in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
I completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies View RelatedI have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies View RelatedI have to go through an ERP projects. "README" file to setup the software gives following instruction which I have attached with this thread.So, according to first step I copied the entire "dolibarr-2.6.1" folder in "/usr/local/apache2". But whenever I call the browser with address given in "README" file my browser gives the following error message : Code: Firefox can't establish a connection to the server at localhost.Please let me know how can I configure the Web Server so that I can use the software.
View 1 Replies View RelatedThis dhcp server is configured with redhat enterprise edition. I found that logs are generating in the following path /var/log my doubt is how can i setup the logs generating for a specified day.
View 1 Replies View RelatedIn short, I've written a bash script (available from github) for configuring and removing instances of clamav-server on Fedora (clamd). It lets you create and remove individual instances with a specific user and port (if you specify them) and will install the required packages if not already present on the system and remove them if you want to. In long, we use Clam AntiVirus as our antivirus protection for Digital Preservation Recorder and talk to it over the default port, 3310 (clamd). Installing the clamav-server package under Fedora however, doesn't actually set up an instance. In fact, it doesn't copy any system configuration files into place at all. This means that the system is left without any working ClamAV server out of the box.
Under Fedora, ClamAV server is configured on a per user basis. This is actually quite important (unless you run as root) because the daemon needs at minimum read access (and we've found also write) on the files/directory being passed for scanning. The instructions on how to configure it are located under /usr/share/doc/clamav-server-[version]/ but I have taken these instructions and written a bash script to configure all of this for you. The script is available from github. It can create or remove an individual instance of clamav-server using a specific username and/or port (if you want to specify them, else it defaults to clamav on port 3310). The script will also install any required packages, if you don't already have them on the system. You also have the option of removing the required packages when you remove an instance. The script now also configures freshclam for you (the definitions updater), which needs to run as your user too.
I have a network with one of the server machine being under Fedora 14 and the clients machines being under Windows 7 and Fedora 14.
Quite often I get some difficulties for the clients to get an IP address from the dhcp server. If I look at the server logs, it looks like the server sees the requests and sends and answer:
Apr 12 19:33:18 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
Apr 12 19:33:18 dhcpd: DHCPOFFER on 192.168.28.52 to 00:21:70:c5:22:4e via eth1
Apr 12 19:33:23 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
Apr 12 19:33:23 dhcpd: DHCPOFFER on 192.168.28.52 to 00:21:70:c5:22:4e via eth1
Apr 12 19:33:33 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
[Code].....
I am trying to set up a DHCP server for a network that does not go on the internet using fedora 14. I have tried several site and every one I look at has a different dhcpd.conf file. I have tried many and every time I try to start the service they fail. Like I said it does not go on the internet. No matter what I do when I try to start the dhcpd service it fails[root@pcrepair ~]# service dhcpd startStarting dhcpd: [FAILED]here is my current config file
# specify domain name
option domain-name
"server.world";
[code]....
I have installed fedora-ds-1.0.4-1.FC6.x86_64.opt.rpm on RHEL 5 Enterprise, which I use for Oracle BIEE. Now I need to install the FDS in another RHEL 5 and mirror only the FDS.
configure the mirroring part for the Fedora Directory Server.
I want to install vmware server on fedora 11. I have tried to and have had issues. how to install.
View 14 Replies View RelatedI know this has been discussed many times, but with the current versions, things have changed again. So I ask again.
I am installed:
- Fedora 13, x64
I want to install, config and run:
- VMWare Server 2.0.2 (Community Edition)
I have already upgraded my Fedora 13 system using important commands:
- yum install kernel-headers kernel-devel
- yum install gcc
I have a directory:
/lib/modules/2.6.33.5-124.fc13.x86_64
with some subdirectories, but no include folder there.
vmware-config found the gcc, but cant find the kernel-header files. Also I dont know how to give it the correct path to these kernel-header files.
I have succesfully installed Apache... It works fine with PHP-MySQL support... I love it too...
But the thing is that I have to store all my files in /var/www/html/ which sort of annoys me... I was wondering of there is any method to reconfigure the httpd.conf file to do it...
All the mods I tried crashed the server....
I am totally new to Linux and have just installed ubuntu 10.10. After configuring the network interface via dhcp I started getting these messages that come in so frequently I can't configure anything else.
[87.186415] Stack:
Why I am getting this messages and more importantly how do I get rid of them.
The installation is on a VM on Hyper-V.
I have a small office setup all on public ips and was trying to work out the best way to move the wearhouse computers on to private ips and leave offices on public ips I have server with 2 nics and i have two switches What i am after is how to set it up so all computers can still see each other but private can not access net All the office computers via switch 1 Public IPs All the wearhouse computers via switch 2 Private IPs
1 DHCP server
3 Routers from ISPs going to switch one
Both switches going to DHCP Server
How to configure DHCP server on Fedora?Is there any package available on Fedora 11 ?
View 5 Replies View RelatedIn my instructions for LAN boot, I am up to the next step :"You need the DHCP server software. If your distribution has none then you can use dhcp-3.1.3 and compile it."ok, so in F11 Live USB . . . I have downloaded and extracted files - they are still in Download directory . . .
Code:
[root@localhost Download]# dir
dhcp-3.1.3 dhcp-3.1.3.tar.gz
[code]....
We have a network of 20 boxes and the router dealt with DHCP, but I'm planning to assign the DHCP task to the linux box. Any heads up? eth card configuration, network topology... etc.?
View 8 Replies View RelatedI am trying to set up a DHCP server for a network that does not go on the Internet using fedora 14. I have tried several site and every one I look at has a different dhcpd.conf file. I have tried many and every time I try to start the service they fail. Like I said it does not go on the Internet. No matter what I do when I try to start the dhcpd service it fails code...
View 2 Replies View Related