I just installed linux. How can I change the index.html file?
my dir is var/www/index.html
it doesnt allow me to delete it the index.html (permission denied) I can't move a file into it either. (permission denied)
I want to remove the index.html file alone in the every directory via bash script, for example i have 5 directories in the path /var/www/vhost
anish
kumar
linux
question
friend
each directories have index.html file now i want to replace the index.html file alone from the other directory /var/tmp/vhosbak
anish
kumar
linux
question
friend
How we can do this using script?
I need a script that can do this: A script that searches all directories and subdirectories for .html files When a .html file is found it creates a index.html file in that folder. It then edits the index.html file and inserts links to all of the .html files that are in that folder into the body. If no .html files are found, it searches for folders. It then creates a index.html file with links to all of the folders.
View 4 Replies View RelatedMy setup is two laptops connected by crossover cable. One runs Windows xp the other Fedora 13. Neither is connected to internet. I'm using a subnet of 192.168.1.x On Fedora eth0 is up, apache runs because it creates pidfile. Everything pings fine. Windows xp ip pings fine from command line. Gave Windows xp a static ip of 192.168.1.1 mask 255.255.255.0 and gateway 1.2, same as eth0. xp says it sees the server. eth0 is up.
DirectoryIndex looks at index.html. I created that file with very simple code and put it in document root. Document root permissions are 755. Access_log 770. Error_log 644. Apache User 755. Listen 80 When I type the ip for eth0 (192.168.1.2) into firefox, firefox gives me an error message - can't find server. The connection status says its connected.
The error log includes a line: [warn]./mod_dnssd.c:No services found to register I don't know what this means. Apache is not writing to access_log. When I cat the path to access_log I get nothing, then a command prompt. I'm looking for the part I'm missing that will let Apache serve that index.html file to firefox so I can see how my code looks to firefox as I go.
Whenever I try to edit my index.html file with Winscp (SSH), it says I don't have the permission to do so. Is there anyway I can change that?
View 4 Replies View RelatedDo I need to restart the webserver if I make any change in the file index.html? Or should the changes get reflected when I open the page again without restarting the service?
View 3 Replies View RelatedI used wget -r to get all the web pages that were linked from index.html. The pages listed in index.html are all chapters. After using wget -r, all the chapters are now in the same folder on my local hard drive. Is there a way to build the chapters in their proper order into a "long"/"full" web page, rather than simply having each chapter as a link/next link on a previous page?
View 9 Replies View RelatedI have a ubuntu 8.04 server running apache2 and would like to allow a CGI script to be executed when visitors come to my site.The purpose of this is to determine which browser the visitor is using and redirect them to the relevant version of the site.
View 9 Replies View RelatedI have displayed web pages (e.g., index.html) under fedora 4, 5, 7, 8 before with no difficulty. Now I troed to do similar thing under Fedora 12, and I cannot display index.html. Is Fedora 12 special? I did '#tail -f /var/log/httpd/error-log' and noticed a line:
"SELinux policy enabled; httpd running as context system_u:system_r:httpd_t:s0"
Is the SELinux policy blocking me from displaying index.html page?
I'm having a bit of trouble getting my index.html to display. when i use [URL] and type in my dyndns url i just get "index of /" and not the index.html page
ive got a index.html in var/www and home/gav/public_html and set chmod -R 755 to the index.html
and still no joy....
gav@lapfrog:/etc/apache2$ gksudo gedit httpd.conf
Userdir public_html
Options +Indexes
Options All
[Code]....
For the 1st domain,say domain1. I name the index file as:
[code]...
3 identical files. It works seamlessly. On browser its webpage can be evoked. Now I add another domain, say domain2. How shall I name its index files?
[code]...
Today, the power was suddenly cut off in my house, then my home Ubuntu Server restarted after the power on, but when I use my laptop to view my wesite, the index.html suddenly became blank page, I did clear the firefox cache, doesn't work, still blank, and I changed browser, to seamonkey, the index.html still was blank, so, I am sure that the problem is coused by the server, and then, I put the index.html file to a subdirectory, which under the /var/www/home/index.html, and then I put the address < [url] > ,then,I can view my website the main page index.html.
View 2 Replies View RelatedBasicly just installed a fresh version of Cent OS 5.4 with apache httpd installed automaticly during the installation. The http daemon is running and when navigating to localhost i get the welcome cent os apache page thingy. The problem is when i put an index.html file in /var/http/www then try and navigation to localhost I get a 403 forbidden error.
View 2 Replies View RelatedIve looked up and down but i cant seem to find an answer to my question. Why cant i upload to my ftp site. I am running a lamp server and i installed proftp. i created users and groups. i tested my server and its working fine. but now when im working on dreamweaver to connect to my ftp... It connects fine i can download my files from the site but when i edit them and try to "put" them back. i get an error:
index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
[code].....
I need to be able to convert HTML email messages saved as text files (.eml or .msg) to PDF documents, one PDF per email, retaining formatting and images.
Are there any Linux tools that will allow me to do this from the command line (so it can be scripted)?
i'm trying to convert a html file into a text file when i simply run "html2text <filename>" the output displayed is the way we want but when i redirect the same using "-o" or ">>" the file is having extra characters in it. i even tried -ascii,but no much use.
View 4 Replies View RelatedI suspect that this has come up numerous times, but I am new to Linux and I am setting up a new in-house server using Ubuntu 9.04 and Apache, etc. I can see the welcoming "It Works!" message when I log in via Firefox. I can see "index.html" when I FTP the server with the site name and password at /var/www. I can also see the -rw-r-r-- attributes, but I can't edit the HTML file or replace it. When I try to rename the "index.html" file.
I get the following message: "Request denied. Verify that the file or folder exists and that you have the necessary permissions on the server to perform the requested operation."
I haven't been able to determine where to enter the password or what changes I need to make to be able to work with the /var/www directory via FTP.
I have indexnew.html file in /var/www/html. I have to view this file in the browser within the network and without using Apache server. Because, my Apache server gets the request to my application. I used http://localhost/indexnew.html to open the file, but it gets to my application.
View 5 Replies View RelatedI'm building a file server using Ubuntu. I want to setup an HTML based file upload/download system where I can create accounts for a few users and allow each user access certain folders. So that the user would open it like a webpage using a web browser and then uploads and downloads files, not needing special setup for the computer. Is there a ready made solution for that purpose? Will I have to code it?
View 1 Replies View RelatedI've got some trouble while trying to install some applications on my linux system. It is said that the files in my /var/www/html/xxx directory, where I put them, is not writeable. The command chmod 777 xxx has been tried to make it work, but the error remains when I opened the applications again.
To be specific, I want to install phpFreeChat on my system, so I put those files in the /var/www/html/freechat directory, cd there and typed chmod 777 data/private, chmod 777 data/public on bash. Here's the result of list -al data:
drwxr-xr-x. 4 root root 4096 Jun 17 15:07 .
drwxr-xr-x. 13 root root 4096 Jun 17 15:22 ..
drwxrwxrwx. 2 root root 4096 Jun 17 15:07 private
drwxrwxrwx. 3 root root 4096 Jun 17 15:07 public
These all seemed all right to me, until I typed http://localhost/freechat in my browser. Here's the result:
phpFreeChat cannot be initialized,
please correct these errors:
/var/www/html/freechat/src/../data/private
is not writeable
[code]....
I just wrote an html file, but somewhere on the write I lost count of the paragraphs.
In an html file paragaphs starts with <p> and ends with </p>
What I want to know is how to find the valid paragraph.
I used grep '<p>' file_name | grep -wc '</p>' . I dont know if this works.
Need to find the size of a file (html), and display it in a summary file. (Have tried du, ls, size, but none of these work).
View 6 Replies View RelatedI need a shell script which will search and remove a javascript from all htm, html and php file.
Code:
<script type="text/javascript"> if (navigator.cookieEnabled) {var user = getCookie("seostop");if (user !=1){winchristop();setCookie("seostop", "1", 7,
[code]....
i want to move the text of a file to another file,using sed command. how can i do it?
View 1 Replies View RelatedI'm working with a dual-boot laptop running Ubuntu 10.0/Windows 7 and a Debian 5 VPS while the OS's shouldn't have much impact on my question.
What I would like to do is create a html page that I can upload to my VPS which lists all of the files/folders on my local 2TB hard drive (Specifically media such as Movies, Music, TV Shows...). The media obviously will not reside on the server, but I would like to at least have a list which will allow me to select, for instance, a bands artist so that it redirects me to the albums in the directory below.
Ultimately, I'm looking for Open Directory Browsing without actually having the media on my server. I have been attempting to create something to this effect using lynx, however, I'm not sure if it can be done with this command or if it's even possible for that matter.
I am looking for some source package which will convert plain text file to html file without using perl.
I mainly need to do this on an ARM platform, so if I get sources I can cross compile it.
What config file do you change to change default run level???
View 3 Replies View RelatedI have managed to create a HTML file inside python code,convert this to a PNG file through a Python script ?
EDIT: Details added: I have a python script which generates map-legends in the form of an html file. The legend generated have to be pasted on a map which is in a png format. A png format file can be pasted on another png format file easily. But because the legends generated are in a html format I cannot paste it on the map file !!
EDIT: Details added: I did Googling first but it resulted in various soft wares for above purpose which I don't want !!
I found an icon theme I want to use. The problem is that it has no index file. Is there some kind of script I can run to automatically generate the index file? Or do I have to go about this manually?
View 3 Replies View RelatedI noticed that Ubuntu takes some time in building the file search index. It seems to do it overnight while my PC is powered down )Is there a way to build the index by a command so that I could do searches whenever I wanted, specially immediately after installing a new program?
View 4 Replies View Related