I'm having a bit of trouble getting my index.html to display. when i use [URL] and type in my dyndns url i just get "index of /" and not the index.html page
ive got a index.html in var/www and home/gav/public_html and set chmod -R 755 to the index.html
and still no joy....
gav@lapfrog:/etc/apache2$ gksudo gedit httpd.conf
Userdir public_html
Options +Indexes
Options All
[Code]....
I have a ubuntu 8.04 server running apache2 and would like to allow a CGI script to be executed when visitors come to my site.The purpose of this is to determine which browser the visitor is using and redirect them to the relevant version of the site.
View 9 Replies View RelatedWhenever I try to edit my index.html file with Winscp (SSH), it says I don't have the permission to do so. Is there anyway I can change that?
View 4 Replies View RelatedToday, the power was suddenly cut off in my house, then my home Ubuntu Server restarted after the power on, but when I use my laptop to view my wesite, the index.html suddenly became blank page, I did clear the firefox cache, doesn't work, still blank, and I changed browser, to seamonkey, the index.html still was blank, so, I am sure that the problem is coused by the server, and then, I put the index.html file to a subdirectory, which under the /var/www/home/index.html, and then I put the address < [url] > ,then,I can view my website the main page index.html.
View 2 Replies View RelatedMy setup is two laptops connected by crossover cable. One runs Windows xp the other Fedora 13. Neither is connected to internet. I'm using a subnet of 192.168.1.x On Fedora eth0 is up, apache runs because it creates pidfile. Everything pings fine. Windows xp ip pings fine from command line. Gave Windows xp a static ip of 192.168.1.1 mask 255.255.255.0 and gateway 1.2, same as eth0. xp says it sees the server. eth0 is up.
DirectoryIndex looks at index.html. I created that file with very simple code and put it in document root. Document root permissions are 755. Access_log 770. Error_log 644. Apache User 755. Listen 80 When I type the ip for eth0 (192.168.1.2) into firefox, firefox gives me an error message - can't find server. The connection status says its connected.
The error log includes a line: [warn]./mod_dnssd.c:No services found to register I don't know what this means. Apache is not writing to access_log. When I cat the path to access_log I get nothing, then a command prompt. I'm looking for the part I'm missing that will let Apache serve that index.html file to firefox so I can see how my code looks to firefox as I go.
I used wget -r to get all the web pages that were linked from index.html. The pages listed in index.html are all chapters. After using wget -r, all the chapters are now in the same folder on my local hard drive. Is there a way to build the chapters in their proper order into a "long"/"full" web page, rather than simply having each chapter as a link/next link on a previous page?
View 9 Replies View RelatedIve looked up and down but i cant seem to find an answer to my question. Why cant i upload to my ftp site. I am running a lamp server and i installed proftp. i created users and groups. i tested my server and its working fine. but now when im working on dreamweaver to connect to my ftp... It connects fine i can download my files from the site but when i edit them and try to "put" them back. i get an error:
index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
[code].....
I am running debian lenny running apache (latest) i am trying to make a webserver. i put the index.html file in my www folder. it shows up when i go to my site (localhost) i put an index.php file in my www folder and when i try to go to my site it Downloads the index.php file instead of showing it.
View 2 Replies View RelatedI just installed linux. How can I change the index.html file?
my dir is var/www/index.html
it doesnt allow me to delete it the index.html (permission denied) I can't move a file into it either. (permission denied)
I have displayed web pages (e.g., index.html) under fedora 4, 5, 7, 8 before with no difficulty. Now I troed to do similar thing under Fedora 12, and I cannot display index.html. Is Fedora 12 special? I did '#tail -f /var/log/httpd/error-log' and noticed a line:
"SELinux policy enabled; httpd running as context system_u:system_r:httpd_t:s0"
Is the SELinux policy blocking me from displaying index.html page?
I have the greek XI character (the 3 bars) in a title in an html file as;<h1>ΞJSFΞ</h1> but when saved by gedit and pulled up in firefox it shows;ΞJSFΞ.Could you offer suggestions as to how to fix this please.I think this is a firefox or Ubuntu problem rather than gedit because when I go into vim it shows ΞJSFΞ.
View 1 Replies View RelatedFor the 1st domain,say domain1. I name the index file as:
[code]...
3 identical files. It works seamlessly. On browser its webpage can be evoked. Now I add another domain, say domain2. How shall I name its index files?
[code]...
I need a script that can do this: A script that searches all directories and subdirectories for .html files When a .html file is found it creates a index.html file in that folder. It then edits the index.html file and inserts links to all of the .html files that are in that folder into the body. If no .html files are found, it searches for folders. It then creates a index.html file with links to all of the folders.
View 4 Replies View RelatedDo I need to restart the webserver if I make any change in the file index.html? Or should the changes get reflected when I open the page again without restarting the service?
View 3 Replies View RelatedI want to remove the index.html file alone in the every directory via bash script, for example i have 5 directories in the path /var/www/vhost
anish
kumar
linux
question
friend
each directories have index.html file now i want to replace the index.html file alone from the other directory /var/tmp/vhosbak
anish
kumar
linux
question
friend
How we can do this using script?
Basicly just installed a fresh version of Cent OS 5.4 with apache httpd installed automaticly during the installation. The http daemon is running and when navigating to localhost i get the welcome cent os apache page thingy. The problem is when i put an index.html file in /var/http/www then try and navigation to localhost I get a 403 forbidden error.
View 2 Replies View RelatedI just did yet another fresh install of OpenSuse 11.1, (no DVD drive otherwise I would use the newer version), all updates have been performed, I installed apache2 and it's modules, php5 and some of the modules I needed, mysql, sshd for local only access, and webmin, postfix is used only for local mail between php scripts and the system, mainly because out-of-the-box, postfix is an open relay, and can take weeks to configure as an SMTP server, so I have to use php scripts that do not use a mail server, anyway.
The problem is, apache2 only seems to know how to serve php files, html files only get shown on ANY browser as source code not the contents.
I've been trying for 3 weeks,,, messing with this option, setting that option, and screwing up the system, hence reformatting and re-installing OpenSuse several times, so if anyone wants to try and get apache to serve html files properly and to have apache use mod_rewrite as default on ANY folder whether inside or outside the document root, I can give that person full ssh access. I've got to the point now, that I don't really give a damn what happens to the server.
What I should be able to do, is, leave the apache and php setting as default,,, upload either an html or php file to the document root and direct a browser to the address, and it'll work without changing a single item, the same is if that file has rewrite, it should work flawless, or if I upload an html or php file to a folder outside the doc root, I change the doc redirect to point to the folder, and it should work without changing anything else.
got my server up, installed FTP and all those goodies. And then i got some fun. Index.HTML shows perfectly. But when i place an Index.PHP, i get nothing at all.I get this error actuallyServer error.The website encountered an errorretrieving http://192.168.1.102/. It may be down for maintenance or configured incorrectly.Here are some suggestions:Reload this web page later. More information on this error
View 7 Replies View RelatedMy apache ignores index files (index.php ,index.html ,index.htm , ...) and while these files exists in directory apache lists directory content!I mean http://localhost/test/ lists directory content instead of showing index.php!
View 9 Replies View RelatedI am tyring to setup my webserver on Fedora 10 to do the following.
first, i want to require logins when people access my machine. This i have working through the .htaccess file.
Second, i want directories that do not have an index.html file to be auto indexed. This is where its not working for me. I get a 403.
the only change from the default setting in the httpd.conf file is AllowOverride AuthConfig
it would seem that the default settings for are
<Directory "/var/www/html">
Options Indexes FollowSymLinks
AllowOverride None
Order allow,deny
[Code].....
IF i put an index.html file in sub/ i no longer get a 403, i just get that file.
First off. I'm not using Ubuntu Server. But I'm trying to get XAMPP set up so I can test Wordpress themes I make. Using 9.10. I got XAMPP installed using the Instructions from Apache Friends. When I went to Localhost I got the language page. Selected English but nothing happened.
Here's my Index.php:
Code:
<?php
if (!empty($_SERVER['HTTPS']) && ('on' == $_SERVER['HTTPS'])) {
$uri = 'https://';
} else {
$uri = 'http://';
}
$uri .= $_SERVER['HTTP_HOST'];
header('Location: '.$uri.'/xampp/');
exit;
?>
Something is wrong with the XAMPP installation :-( I searched and found a couple Index.php files. Deleted one. And now when I go to localhost I get a "Index of" page.I removed the XAMPP folder, Deleted Apache, PHP from Synaptic(They got reinstalled when i reinstalled XAMPP btw). Installed LAMP but it still does it. Maybe reinstall XAPP and copy the index.php files from another Comp?.
I am trying to install Jinzero a media server on my ubuntu server.
I already had apache2 installed and have installed php5 etc.
When I try to access index.php I get an http error 500 and when I check the logs of my apache2 it shows:
PHP Code:
If I go to a virtual host it asks me if I want to save "index.php" (Typing in the host name followed by index.php also works). But if I go the main site it does not. This happened after an upgrade to Ubuntu 10.04
Here are some additional details - apachectl -M shows rewrite_module (shared) the host config file has AllowOverride All the dir and php5 modules are loading fine.
i have a weird issue with my web server. every time i enter my domain name instead of processing my index file it downloads it. wth could be the problem first time this ever occurred. recently installed webmin.
View 7 Replies View RelatedUbuntu 1010 server 64bitlighttpdFor the 1st domain,say domain1
I name the index file as:
/var/www/index.html
/home/lighttpd/default/http/index.html
[code]....
I have my home network up and running. I can access my index file by the ip I gave to eth0 - 192.168.0.2
I put this same ip into etc/hosts:
192.168.0.2 localhost localhost.localdomain
One space separates the hostnames from the ip in /etc/hosts.
The hostname command returns: localhost.localdomain
I have /etc/resolv.conf configured the right way, so I can use my isp's DNS servers. I know this because yum works and I can ping anywhere by url. The next step is to learn to access the index file by url locally on my own network.
I have an Ubuntu 9.10 server set up at my house. I have Apache2 and PHP5 installed on it. Every time I go to the server on a web page and try to load the PHP index page it downloads instead of displaying.
I have virtual servers set up and have the files stored at /home/cusinndzl. If anyone needs to take a look I can let them into the webmin panel.
I was having this issue with my server when I tried upgrading (fresh install) to 10.04 from 9.04. But to test it out after going back to 9.04 I installed 10.04 server in a virtual machine and found the same issues. I was using the AMD64 version for everything. In the virtual machine I chose openssh and samba server in the initial configuration. After the install I ran a dist-upgrade and installed mdadm. I then created an fd partition on 3 virtual disks and created a RAID5 array using the following command:
Code: sudo mdadm --create --verbose /dev/md0 --level=5 --raid-devices=3 /dev/sd[b-d]1
This is the same command I ran on my physical RAID5 quite a while ago which has been working fine ever since. After running a --detail --scan >> mdadm.conf (and changing the metadata from 00.90 to 0.90) I rebooted and found that the array was running with only one drive which was marked as a spare. On the physical server I kept having this issue with one drive which would always be left out when I assembled the array and would work fine after resyncing until I rebooted. After I rebooted the array would show the remaining 6 drives (of 7) as spares.
I updated mdadm to 3.1.1 using a deb from debian experimental and the RAID was working fine afterward. But then the boot problems started again. As soon as I added /dev/md0 to the fstab the system would hang on boot displaying the following before hanging:
[Code]....
I am running a few virtual domains on Apache/Fedora 9. I have some domains working fine but when I tried to put up another one today I get "Directory index forbidden by Options directiveL : /home/jek/www/AAA/" Now here's the weird part. That message appeas in the error log for domain AAA, whereas the new domain is BBB and has it's own log files defined in httpd.conf. On the browser the Fedora test page is displayed. SELinux is turned off.
View 4 Replies View RelatedI think my apache2 is owned and running as root. I don't know if I installed it like a noob a while ago but I would like to secure it now especially since I just figured out how setup virtual hosts and I may want to eventually let people host sites on my server and I obviously don't want to have to give them root access. How can I confirm that apache2 is running as root and how do I take it away from the root user?
View 6 Replies View Related