Do I need to restart the webserver if I make any change in the file index.html? Or should the changes get reflected when I open the page again without restarting the service?
View 3 RepliesWhenever I try to edit my index.html file with Winscp (SSH), it says I don't have the permission to do so. Is there anyway I can change that?
View 4 Replies View RelatedMy setup is two laptops connected by crossover cable. One runs Windows xp the other Fedora 13. Neither is connected to internet. I'm using a subnet of 192.168.1.x On Fedora eth0 is up, apache runs because it creates pidfile. Everything pings fine. Windows xp ip pings fine from command line. Gave Windows xp a static ip of 192.168.1.1 mask 255.255.255.0 and gateway 1.2, same as eth0. xp says it sees the server. eth0 is up.
DirectoryIndex looks at index.html. I created that file with very simple code and put it in document root. Document root permissions are 755. Access_log 770. Error_log 644. Apache User 755. Listen 80 When I type the ip for eth0 (192.168.1.2) into firefox, firefox gives me an error message - can't find server. The connection status says its connected.
The error log includes a line: [warn]./mod_dnssd.c:No services found to register I don't know what this means. Apache is not writing to access_log. When I cat the path to access_log I get nothing, then a command prompt. I'm looking for the part I'm missing that will let Apache serve that index.html file to firefox so I can see how my code looks to firefox as I go.
I suspect that this has come up numerous times, but I am new to Linux and I am setting up a new in-house server using Ubuntu 9.04 and Apache, etc. I can see the welcoming "It Works!" message when I log in via Firefox. I can see "index.html" when I FTP the server with the site name and password at /var/www. I can also see the -rw-r-r-- attributes, but I can't edit the HTML file or replace it. When I try to rename the "index.html" file.
I get the following message: "Request denied. Verify that the file or folder exists and that you have the necessary permissions on the server to perform the requested operation."
I haven't been able to determine where to enter the password or what changes I need to make to be able to work with the /var/www directory via FTP.
Today, the power was suddenly cut off in my house, then my home Ubuntu Server restarted after the power on, but when I use my laptop to view my wesite, the index.html suddenly became blank page, I did clear the firefox cache, doesn't work, still blank, and I changed browser, to seamonkey, the index.html still was blank, so, I am sure that the problem is coused by the server, and then, I put the index.html file to a subdirectory, which under the /var/www/home/index.html, and then I put the address < [url] > ,then,I can view my website the main page index.html.
View 2 Replies View RelatedI just installed linux. How can I change the index.html file?
my dir is var/www/index.html
it doesnt allow me to delete it the index.html (permission denied) I can't move a file into it either. (permission denied)
I need a script that can do this: A script that searches all directories and subdirectories for .html files When a .html file is found it creates a index.html file in that folder. It then edits the index.html file and inserts links to all of the .html files that are in that folder into the body. If no .html files are found, it searches for folders. It then creates a index.html file with links to all of the folders.
View 4 Replies View RelatedI have displayed web pages (e.g., index.html) under fedora 4, 5, 7, 8 before with no difficulty. Now I troed to do similar thing under Fedora 12, and I cannot display index.html. Is Fedora 12 special? I did '#tail -f /var/log/httpd/error-log' and noticed a line:
"SELinux policy enabled; httpd running as context system_u:system_r:httpd_t:s0"
Is the SELinux policy blocking me from displaying index.html page?
I want to remove the index.html file alone in the every directory via bash script, for example i have 5 directories in the path /var/www/vhost
anish
kumar
linux
question
friend
each directories have index.html file now i want to replace the index.html file alone from the other directory /var/tmp/vhosbak
anish
kumar
linux
question
friend
How we can do this using script?
For the 1st domain,say domain1. I name the index file as:
[code]...
3 identical files. It works seamlessly. On browser its webpage can be evoked. Now I add another domain, say domain2. How shall I name its index files?
[code]...
I used wget -r to get all the web pages that were linked from index.html. The pages listed in index.html are all chapters. After using wget -r, all the chapters are now in the same folder on my local hard drive. Is there a way to build the chapters in their proper order into a "long"/"full" web page, rather than simply having each chapter as a link/next link on a previous page?
View 9 Replies View RelatedBasicly just installed a fresh version of Cent OS 5.4 with apache httpd installed automaticly during the installation. The http daemon is running and when navigating to localhost i get the welcome cent os apache page thingy. The problem is when i put an index.html file in /var/http/www then try and navigation to localhost I get a 403 forbidden error.
View 2 Replies View RelatedI installed apache and when i go to my 127.0.1.1 ip i see the welcome page. I found the directory where the html is located (var/www/index.html but i cannot edit the file. what is going on here? why cant i edit the HTML file?
View 1 Replies View RelatedI've set up Apache once or twice in the past, but my memory is escaping me on something simple. This time the OS is Cent5 with Apache/2.2.3
When a user browses to: [url] <nothing else> I get as expected, a '403 'You don't have permission to access' because directory browsing is off for obvious reasons :-) If I enter the full URL to the script: [url]it works as expected. No issues there.
What I would *like* to do (and I'm sure I've done this before) is to set the cgi-bin up so if someone leaves off the script name: http://host.name/cgi-bin/ it serves "index.cgi" pretty much in the same way that if you browse to the root http directory, you index.html||php would normally serve. I just can't remember how to achieve this simple thing and I'm starting to wonder 'am I mad? - Did I do this before?'.
Sanity check - index.cgi exists and runs if you call it directly thus:
Code:
I have added:
Code:
That made no difference.
Tried:
Code:
For good measure, but that made no difference - and even
Code:
and no amount of playing with 'Options Indexes || -Indexes || +Indexes' helped me.
Like I say, I'm sure I've done it before (on Debian/Ubuntu) without the need to start playing with redirects or .htaccess - but I'll be blowed if I can remember how.
I'm sure this is something simple, but I've googled all over and can't find the answer for the life of me. I've got an apache server and I need to redirect all requests to HTTPS in the same domain, except for 1 html file the load balancer hits and needs to get a 200 on. Can anyone point me to some documentation or show me what I need to add to the httpd.conf file to get it working properly?
View 1 Replies View RelatedI've reinstall the apache because of a starting problem and now it give me to download HTML files.
View 7 Replies View RelatedI want to put Google analytics code on all legacy pages on my server, most of them don't have a template so I was wondering if Apache can automatically append the code.
View 2 Replies View RelatedI have a ubuntu 8.04 server running apache2 and would like to allow a CGI script to be executed when visitors come to my site.The purpose of this is to determine which browser the visitor is using and redirect them to the relevant version of the site.
View 9 Replies View RelatedI'm having a bit of trouble getting my index.html to display. when i use [URL] and type in my dyndns url i just get "index of /" and not the index.html page
ive got a index.html in var/www and home/gav/public_html and set chmod -R 755 to the index.html
and still no joy....
gav@lapfrog:/etc/apache2$ gksudo gedit httpd.conf
Userdir public_html
Options +Indexes
Options All
[Code]....
This really has me baffled! I'm running Apache 2.2 on Windows Server 2003 (I know, my first blunder). I can edit existing virtual hosts without a problem, for example, I can change this existing vhost to point to a different document root and it works fine:
<VirtualHost *:80>
ServerName existingsubdomain.mydomain.net
DocumentRoot "C:/Inetpub/wwwroot/mydirectory"
</VirtualHost>
But the moment I try to add a new virtual host, it doesn't get recognized! When I try to browse to it in a browser, I get a "Server not found: Firefox can't find the server at newsubdomain.mellemallc.net."
<VirtualHost *:80>
ServerName newsubdomain.mydomain.net
DocumentRoot "C:/Inetpub/wwwroot/mydirectory"
</VirtualHost>
Can anyone point me in the right direction as to why this may be happening?
I recently restarted my Apache server to change the max upload from 5mb to 25mb. Once Apache restarted I tryed to go to my website via url www.website.com and a blank page with this source code:
<html>
<body bgcolor="#FFFFFF">
</body>
</html>
I also have two demo websites that I am running and when I go to there url's www.website.com/demosite apache will serve up the index.php
I didn't change anything but the max_upload in the apache2.conf and restarted.
I have a linux.img image for ubuntu.I want to edit file inside it, how can open it, edit a file, then remake the bin file?
View 7 Replies View RelatedHow can I edit/create HTML document and run them in linux?
View 7 Replies View RelatedIve looked up and down but i cant seem to find an answer to my question. Why cant i upload to my ftp site. I am running a lamp server and i installed proftp. i created users and groups. i tested my server and its working fine. but now when im working on dreamweaver to connect to my ftp... It connects fine i can download my files from the site but when i edit them and try to "put" them back. i get an error:
index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
[code].....
My apache ignores index files (index.php ,index.html ,index.htm , ...) and while these files exists in directory apache lists directory content!I mean http://localhost/test/ lists directory content instead of showing index.php!
View 9 Replies View RelatedI'm building a file server using Ubuntu. I want to setup an HTML based file upload/download system where I can create accounts for a few users and allow each user access certain folders. So that the user would open it like a webpage using a web browser and then uploads and downloads files, not needing special setup for the computer. Is there a ready made solution for that purpose? Will I have to code it?
View 1 Replies View RelatedI'm using mrtg to generate html files. With mrtg , i use indexmaker . Inside html files , i have found some html tag like "<SMALL>some text</SMALL>".
There is the manner to delete text inside two tags ? With bash script?
My system is fedora 15 and i have been using quanta plus as my editor to edit html and php files... I need windows based quanta plus .. though I googled a lot for windows platform I may not be able to get ..
View 2 Replies View RelatedI've got a perl script which generates an html file. What I'd really like to do is send people to just one page (the perl page) which then generates the html and shows the html page in question. Thus the whole transition will be invisible to the user, they'll just have an html page.FYI the perl script generates a list of the users who last logged in to the system, it needs to be up to date (by the second).Let me know if this isn't clear, I understand it sounds a bit confusing...
View 4 Replies View RelatedI've just upgraded my laptop to Fedora 14 and installed LAMP on it for a test environment. I've followed the official instructions to install but seem to have a problem that I didn't have on F13 or Opensuse. Each time I try to access index.php on localhost I get a permission denied message and an SElinux alert. I have tried 7 different solutions on various forums and just can't view anything in a browser.
/var/www/html has been set to chmod 777
/var/www/html/index.php has also been set to chmod 777
A standard user can definitely read and write to the above files/folder. Until I commented it out the Welcome/Test page was working perfectly.