General :: Using Lynx To Create Html Page With The File Structure Of A Local Directory
Oct 10, 2010
I'm working with a dual-boot laptop running Ubuntu 10.0/Windows 7 and a Debian 5 VPS while the OS's shouldn't have much impact on my question.
What I would like to do is create a html page that I can upload to my VPS which lists all of the files/folders on my local 2TB hard drive (Specifically media such as Movies, Music, TV Shows...). The media obviously will not reside on the server, but I would like to at least have a list which will allow me to select, for instance, a bands artist so that it redirects me to the albums in the directory below.
Ultimately, I'm looking for Open Directory Browsing without actually having the media on my server. I have been attempting to create something to this effect using lynx, however, I'm not sure if it can be done with this command or if it's even possible for that matter.
View 1 Replies
ADVERTISEMENT
Jul 22, 2010
does any one knows a linux based program/script that can generate html files based on directory structure?
View 1 Replies
View Related
Jul 7, 2010
1. I need help to create a interface to run software.2. The software is running at the back
View 4 Replies
View Related
Jun 22, 2011
I have iMac 2.4GHz with rEFIT installed. I installed Unity on one of the partition. Kernel is still 2.6.38.8. I am getting error message when I run the command
sudo gedit /etc/x11/xorg.conf
The error message is
(gedit:2139): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.AC7YXV': No such file or directory
(gedit:2139): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory
View 3 Replies
View Related
Jun 16, 2010
I am a student studying computer science course.
Well, I am facing problem when doing lab questions.
I must use DLXLinux bundled in Bochs (bochs.sourceforge.net).
I am required to use the /usr/local directory.
In /usr directory, there is no directory named 'local' but there is one thing called 'local@'. So, when I try to use mkdir command to create 'local' directory in /usr , there are error "cannot make directory.....".
Look at my screenshot at [url].
View 9 Replies
View Related
May 15, 2010
jump into a Linux class in college with only 3 weeks left in the course. I thought I would be able to catch on, and go figure, it didn't exactly happen that way. I was given an assignment to do, and I am so far lost it isn't even funny. I need to create a directory structure, set up file security, create a step by step instruction manual on how to copy/delete said files, and create a guide to common Linux commands. How would I create these files in root and share them with the other users? and where can I find a list of common commands and their functions?
View 5 Replies
View Related
Jul 8, 2011
I have the following content on the source directory:
source/foo.txt
source/bar/another_file.txt
source/bar2/and_another.txt
I want copy those files to a destination directory which, after copy, shall look like this:
destination/foo.txt
destination/another_file.txt
destination/and_another.txt
How can I do this? It seems that "cp" lacks such an option
View 1 Replies
View Related
Mar 12, 2010
i'm using wget with this parameters:
wget -E -H -k -K -p -nH -nd -Pfolder http:\www.mysite.com
using this parameters the main html page and all the images will download in the same folder. Instead i would like to have the html page in a folder and all the images,css ecc in a subdirectory for example i want to have:
c:foldermain.html
c:foldersubfolderimage.jpg
c:foldersubfolderimage2.jpg
c:foldersubfoldercss.css
It's the same that mozilla firefox do when i save a html page on local machine ("save page as" on file menu) Which parameters do i have to use?
View 1 Replies
View Related
Nov 15, 2009
I have a file that has been created by exiftools and then parsed and cut to fit my needs and thrown into a file that looks like this:
Code:
I then make the file executable and then execute it. Trouble is, the destination directories don't actually exist, so naturally, the "ln -s" fails.
Is there a way to create the destination directories dynamically based on what is specified in the file above?
View 3 Replies
View Related
Sep 19, 2011
I want to copy all files with the name XYZ* into one folder. The problem is that the files are in different subfolders and that not even the depth of the folder structure is the same for all files. Luckily, at least each file has a unique name.
Of course, I thought about the cp command but I guess the depth of the folder structure needs to be the same for this to work.
View 3 Replies
View Related
Feb 4, 2010
is it possible to set a local html page as the desktop as in active desktop in windows.
View 1 Replies
View Related
Oct 6, 2010
I am currently interning at a place and my job is to essentially learn UNIX. My supervisor gives me problems here and there to help guide me with my learning but for the most part I'm doing this all by self-teaching myself. Needless to say I have run into a few obstacles...for instance-Create a *one* line command that, using tar, will collect the full /usr/local directory (you need to run this as root again) and copy the whole /usr/local structure under /optFor example /usr/local/bin/hello will become /opt/local/bin/hello, etc. I want this as follows:1. /usr/local is collected by tar, but the output of this tar command is its stdout.. what you get from the previous stdout, you compress with gzip and send it to stdout again 3. get this output and decompress with gzip.. get this output and pipe to tar in a way that will extract the tree under /opt.If anyone knows how I could go about doing this, please let me know, or at the very least point me in the right direction. What I've got so far (which could be completely wrong) is:tar cvf - usr/local/ | gzip -c - | gunzip -c - | tar xvf -in theory I feel like this should work (except for extracting the tree under /opt...i'm kinda stuck there)
View 3 Replies
View Related
Mar 18, 2010
I have index.html page with tables rows and cells. Within table I have:
Quote:
<table width="100%">
<tr>
<td class="form-font" width="40%" align="left">
<iframe src="create.html" width="100%" height="200" frameborder="no" scrolling="no">
[Code].....
but in index.html appears the following screeshot.jpg. create.html and index.html are both in /var/www directory. Why create.html appears in /cgi-bin directory?
View 2 Replies
View Related
Jul 7, 2011
I want to remove the index.html file alone in the every directory via bash script, for example i have 5 directories in the path /var/www/vhost
anish
kumar
linux
question
friend
each directories have index.html file now i want to replace the index.html file alone from the other directory /var/tmp/vhosbak
anish
kumar
linux
question
friend
How we can do this using script?
View 5 Replies
View Related
Mar 9, 2010
I used wget -r to get all the web pages that were linked from index.html. The pages listed in index.html are all chapters. After using wget -r, all the chapters are now in the same folder on my local hard drive. Is there a way to build the chapters in their proper order into a "long"/"full" web page, rather than simply having each chapter as a link/next link on a previous page?
View 9 Replies
View Related
Sep 27, 2010
What command would you use to read about the sync system call (not the sync command)? How would you read a local man page for sync that was kept in the /usr/local/share/man?
View 2 Replies
View Related
Aug 11, 2010
i am running Ubuntu Lucid x64 as a fileserver that shares its files via SFTP, NFS and Samba. Currently the hard disks are configured to go to standby if they are not needed. This works perfectly as long as no one browses the shares or my HTPC is running: That one repeatedly looks through the shares for new music or movies. In other words my problem is that the disks are spinning up a lot more often than they should have to. Additionally the spin-up time delays the response time while browsing. Since the machine has a lot of unused RAM i want to tell the kernel that it should keep the directory structure in memory. That way the disks would not need to spin up every time someone browses through the directories.
View 2 Replies
View Related
Mar 20, 2009
I want to read an ftp site [URL]...and download the sub-directory structure and ONLY the tagfiles to the local directory.
FROM THIS:
Code:
slackware
+--a
| |aaa_base-12.2.0-noarch-1.tgz
| |aaa_base-12.2.0-noarch-1.tgz.asc
[code]....
I tried wget + grep but that didn't work too well.
View 2 Replies
View Related
Jun 8, 2009
I have apache httpd server on my Fedora 10I got 2 problems:First : I copied the web page files to its Document Root <var/www/html> & Disabled the default web page. But when I visit http:/localhost ，it shows up the list of files in <var/www/html> as if a ftp server browsed in web page. So how can I set http://localhost load my default web page index.html ?Second :I want to set up a web server on Internet through my router . I applied for DDNS account & input it into router correctly . I set virtual host in server to redirect any access from port 80 to 192.168.1.2:80 in LAN . Just for in case , I also download and running the DDNS software & installed it on PC 192.168.1.2 in LAN . My DDNS provider is oray.cn . It's a Chinese server provider . I don't think there is anything wrong with oray.cn . But if you need its information just visit oray.cn (Google can translate it for you). So I want to know did I miss something to set up a web server in this kind of situation
View 2 Replies
View Related
Jul 17, 2011
user@ubuntu:~/Documents/C$ man host_ent No manual entry for host_ent How to install the manpage for host_ent or in_addr under ubuntu?
View 1 Replies
View Related
Sep 2, 2009
I've been looking high and low for a utility program or perl script or something that can take a linux directory structure as input and convert it to MS-DOS 8.3 directory structure.
The purpose of this is to conform to the path format that is expected on my rather old Creative Zen Neeon MP3 player for m3u play lists.
View 5 Replies
View Related
Jul 16, 2011
i just started dabbling with this Linux program Fedora and i go to school for cpu forencics but havnt reached Linux+ yet.
View 13 Replies
View Related
Jun 24, 2011
I've the following file structure that I would like to add to git.
Code:
These are big directories and I don't need them all checked out. I only need the src directory. After I commit the files in the /app/src, it must be pushed to a remote site.
If I want only to checkout the src directory to work on, it's important to create a special file structure in git? For example, instead of doing git init on app general directory, should I do git init on all subdirectories?
Is it possible to checkout only part of a file structure in git?
View 1 Replies
View Related
Sep 25, 2010
I need a script that can do this: A script that searches all directories and subdirectories for .html files When a .html file is found it creates a index.html file in that folder. It then edits the index.html file and inserts links to all of the .html files that are in that folder into the body. If no .html files are found, it searches for folders. It then creates a index.html file with links to all of the folders.
View 4 Replies
View Related
Mar 20, 2011
My clearly outdated Linux course I'M using is telling me that the directory structure for building RPMs is in /usr/src/redhat, but on my redhat system, there is only /usr/src/ > debug & > kernels, folders.
View 5 Replies
View Related
Oct 1, 2009
I am working on a script to convert a comma seperated text file into html code line by line. The text file is like so:
Code:
link url, image url, description and I want it to output this:
Code:
<td><a href=�link url�><img src="image url" alt=�description" /></a></td>
Here is what I have so far:
Code:
#!/bin/bash
var1='<td><a href=
var2='><img src="'
var3='" alt=�thumbnail image" /></a></td>'
[code].....
It puts the entire line into the html so its no good. I'll probably need to use awk (I think).
View 5 Replies
View Related
May 20, 2010
I am using RHEL 4.4. Last time when I reboot my server it generate an error, and mention to run fsck command in repair mode. When I ran, this fix some problems, but after that it generate an error of gdm and X11 services after showing login sceen and getting user name and passwod. But I login via putty from a remote system. So, when I tried to make changes like create directory or file or even tried to make any change in any file it generate an error that " you can not make changes in read only file system".
View 10 Replies
View Related
Apr 13, 2011
diff has the ability to trasverse directory structures. cmp has the ability to manage binary files.
I'm looking for something which allows me to compare a directory's contents, including files and subdirectories, and so a binary comparison.
Any suggestions, scripts, etc. which may be of help?
Some of my directories are huge, with huge (image) files in them.
View 2 Replies
View Related
Apr 8, 2010
How do I download all the files form here: [URL]. I am on freeBSD 7.0 and I tried wget with the -r switch and it gives me URL's only. Maybe this is simply not an ftp site I don't know. How I can download all those files with the same directory structure.
View 5 Replies
View Related
Apr 15, 2011
How to parse the bunch of values displayed by the socket program into the php file so that further it can be displayed in HTML page
View 1 Replies
View Related
