OpenSUSE Install :: NVIDIA Driver Slows X And KDE Start?

Apr 19, 2011

I have recently installed openSUSE 11.4 x86_64 on my laptop, with NVIDIA driver (260.19.44,Geforce 9300M GS).Performance is good, but it slows the boot process: The NVidia logo appears and stays on the screen for 10 seconds aproximately.KDE start is very slow also. I have tried to fix it by adding nomodeset to menu.lst and settting sysconfig variable NO_KMS_IN_INITRD to yes,with no success.

View 9 Replies


ADVERTISEMENT

OpenSUSE Hardware :: Nvidia GTX260 Driver - Try To Start X Says That My Card Is Not Supported

May 19, 2010

I just got a new computer and I have been busy setting it up with openSUSE 11.2. I am trying to install the Nvidia proprietary driver for my graphics card, a Geforce GTX 260, but it will not work. I added the Nvidia repository and I am installing the driver for GeforceFX series cards but every time I restart I get a command prompt and if I try to start x it says that my card is not supported. This is really getting frustrating, I need the proprietary driver so I can play DDO with Wine.

View 2 Replies View Related

OpenSUSE Install :: GUI Not Getting After NVIDIA Driver Installing In 11.3

Jan 8, 2011

I installed on my laptop NVIDIA driver from the opensuse repository. After restart i am not geting the GUI.The screen blinks while booting and finally ends in command line login. Error shows that gdm lasted for only few seconds. Max number of try exceeded.

HP pavillion ZV5000
64b processor
NVIDIA GEForce4 440 64m

View 1 Replies View Related

OpenSUSE Install :: Nvidia Geforce 8200 Driver Install Error - Version.h Not Found

Jan 11, 2011

After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.

Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h

PATH:

Using: nvidia-installer ncurses user interface

ERROR:

View 9 Replies View Related

OpenSUSE Hardware :: Install NVIDIA Propriety Driver?

Jul 3, 2010

* My Graphics card is a NVIDIA Geforce 7900 GTX. I am running OpenSUSE 11.2. I have attempted to install the Propriety NVIDIA Drivers (without success). I have added the repository to YAST, then proceeded to install the NVIDIA software.

I then proceeded to reboot my computer into "init 3" mode. I ran the nvidia-xconfig tool as described in the
openSUSE Graphic Card Practical Theory Guide for Users site I then proceeded to type "startx" and it failed to load.

View 2 Replies View Related

OpenSUSE Hardware :: Unable To Install Nvidia Driver?

Oct 15, 2010

i tried to go threw this by some tutorials on the wiki but without success. i all the time got this error: Nvidia log: [URL].. even if i ran the make oldconfig && make prepare command..

View 8 Replies View Related

OpenSUSE Hardware :: Can't Install Legacy Nvidia Driver

Mar 13, 2011

i tried installing the driver through the one click install (SDB:NVIDIA drivers - openSUSE) and through zipper, but system info says that the display driver is nouveau. here are my specs

opensuse 11.4
RIVA TNT2 Model 64/Model 64 Pro

View 4 Replies View Related

OpenSUSE Hardware :: Install Nvidia Driver Using Dkms?

Jul 5, 2011

dkms is a facility which lets you to install drivers as module and it'll compatible with kernel upgrade.Driver will live as its source code in system,so after each kernel upgrade , driver module will recompile itself to work properly with new kernel.I read about dkms , but I have no experience to configure it by myself. I want to install nvidia driver using dkms,but I don't know how and where I can find source code of nvidia driver.

View 2 Replies View Related

OpenSUSE Install :: Unable To Use The YaNDP Yet Another Nvidia Driver

Feb 16, 2010

I installed openSuSE 11.2 three days ago, the first time, and have been trying to get the nvidia video driver to work ever since. So far, no luck. I have a dual-boot system with Windows 2k (legacy programs) and the graphics card works fine there, so the problem isn't hardware related. The nv driver also works under 11.2, but not well.The graphics card is a GeForce 6200, and the computer is an old Tyan Thunder S2885 with dual Opteron processors. I'm in 64 bit mode for the Linux install.

I've tried installing the video drivers by:Doing a fresh install, loading in the nvidia repository, then doing online update. The two nvidia drivers were loaded (nvidia-gfxG02-kmp-desktop and x11-video-nvidiaG02), but when I tried to reboot I end up with a blank screen and no sync to the monitor (Hitachi SuperScan Elite 751 CRT type). Rebooting in safe mode brings up the nv driver, which works. Doing a fresh install, doing online update,then loading in the nvidia repository, refreshing it, and installing the same two RPMs . . . with the same result. Doing a fresh install and using the "one click" install from this web site. Same result.

Doing a fresh install, doing online update, selecting the pattern "Linux Kernel Development" and installing it, downloading the Nvidia installer NVIDIA-Linux-x86_64-190.53-pkg2.run and installing it. Same result.

Same as above, but then using Sax2 -r -m 0=nvidia, even though Sax is depreciated. Same result. I've tried modprobe nvidia. Nothing. Over the last two days I've probably tried several other iterations as well, and forgot them, but nothing worked, it's always the same result.

Another weirdness, when I have YaST do "Hardware Information" it has no trouble identifying the monitor a getting it's info, but when I click the Display icon on the panel it tells me that it can't identify the monitor.

Here's the basic system info:

Code:

Directory: /home/BillyDoc/Desktop
Tue Feb 16 09:21:23 CST 2010
BillyDoc@linux-k7w3:~/Desktop> lsmod | grep nvidia
nvidia 9647368 0
BillyDoc@linux-k7w3:~/Desktop> su

[code]....

I'm definitely a novice to this sort of thing, and at this point I haven't a clue what's going on. It looks like the nvidia driver get's installed alright, but X simply doesn't know it's there. Oh, and another thing. When I go into YaST to look for the "Graphics Card and Monitor" program . it's missing! I assume this is because Sax is depreciated, but what's the substitute?

View 9 Replies View Related

OpenSUSE Install :: Messed Up NVidia Driver After Upgrade

Jul 26, 2010

I did an upgrade of Nvidia(Latest version v.196) and KDE-base4 to KDE 4.4.4(I think) in Yast2. Now when I reboot the X doesnt start. I claim it can't find any nvidia-module. I thing the upgrade of Nvidia v.196 failed, so I need to know how to reinstall Nvidia in console(CLI). It only boot up in cli. I thought it is so simple to just download the latest driver and install in CLI, but my NetworkManager doesnt start eighter so I don't have any network.

OpenSUSE 11.2 64bits
KDE 4.4.x
Nvidia NV140 Quadro 512MB

I guess my mistake was to upgrade both KDE and Nvidia in the same operation.

View 4 Replies View Related

OpenSUSE Install :: No More Display After Nvidia Driver Update?

Aug 9, 2011

This morning, I authorized an update as almost every day. I saw that the nvidia driver was on the list but in recent years, I no longer fear these driver updates since everything usually works well...

Except that this time, no! I turn on my pc this afternoon and more 3d effects. I run "Nvidia X Server Settings" which tells me I do not use the nvidia driver and must run as root the command "nvidia-xconfig," what I do. I restart X and no display at all, only the prompt in text mode!

View 9 Replies View Related

OpenSUSE Install :: Installing NVidia Driver For Geforce GTX 275 Fails

Aug 20, 2009

I have just installed openSUSE 11.1 64 bit on my system. Subsequently registered to get an auto-update repo and auto-updated until no more updates were offered. Then I first tried YaST to install NVidia drivers from the NVidia repo (added their repo), but sax2 wouldn't recognize them. So I downloaded their 190. (beta) drivers, installed the kernel source code and gcc 4.3. Then I switched to a console (Ctrl+Alt+F1), closed the x server, ran the driver install as described (gcc 4.3 is installed). Installer said that all is fine (I checked the log to be sure). So I ran sax2 -r -m 0=nvidia, but the driver still isn't recognized.

View 6 Replies View Related

OpenSUSE Install :: Prepare Kernel For Instalation NVIDIA Driver?

Jul 16, 2010

I would like to install above mentioned driver. I need to prepare kernel for this instalation, but this information I didnt find on openSUSE pages. I add openSUSE 11.3 KDE

View 9 Replies View Related

OpenSUSE Install :: Stable - Install Nvidia - Driver 260.xx.xx In Opensuse 11.3?

Jan 19, 2011

i know if u search a solution in forums u get so much confused information. i hope this little manual will help all with the nvidia driver problem! u dont need to edit or create a xorg.conf or something to run the driver correct and u need no blacklistedit too! if u did the standard opensuse 11.3 install its only about 2 kernel packages and the disabling of the x11noveau driver.

1. after standard installing opensuse 11.3 update and install the opensuse softwareupdates

2. install with the yast software re/installer:

(from Desktop or from the terminal. the terminal text command is: yast2)

[Code]...

u dont need to change the menu.lst after all, only u get many problems. run the midnight commander and delete the nomodeset word and the noveau driver would be normally still active after reboot.

View 6 Replies View Related

OpenSUSE Hardware :: Compiling Kernel-source For NVidia Driver Install

Jun 18, 2011

In order to configure a dual display in a fresh 11.4 installation, I am attempting to install the nVidia driver according to the instructions in SDB:NVIDIA the hard way - openSUSE. I have not previously compiled or configured a kernel so I largely followed the instructions from OpenSUSE 11.2 - How to compile a Kernel for Newbies.The currently installed kernel is 2.6.37.1-1.2-desktop. The graphics card is an ASUS EN9600GSO (512MB).

In Yast, I installed gcc, make, kernel-devel (v. 2.6.37.1-1.2) and kernel-desktop-devel (v. 2.6.37.1-1.2). Per the "hard way" instructions, I did not install kernel-source.

View 9 Replies View Related

OpenSUSE Install :: No Boot Image After Installing Nvidia Proprietary Driver In 11.3

Jul 21, 2010

since i installed nvidia proprietary driver on opensuse 11.3 my boot-image is gone. This is not really in issue but i would like to have it back. is there a way to get it back or a bootimage howto or something?

View 5 Replies View Related

OpenSUSE Install :: [11.3] Boot Splash Disappeared After Installing Nvidia Driver?

Jul 21, 2010

I installed the nvidia driver from the official repository for openSUSE 11.3 and now everything works perfectly, except i get a verbose splash screen after the grub menu.It has worked after i upgraded from 11.2. In my menu.lst it already says splash=silent.If you want more information, please ask, because i don't know where to look or what to show you (i'm fairly new to linux in general).

View 6 Replies View Related

OpenSUSE Install :: 11.4 - Cannot Install Nvidia Driver ?

Aug 3, 2011

Nvidia h/w:Quadro FX 570

Installed 11.4 yesterday. No problems. Installed Gnome 3 today and it goes into fallback mode. Assuming that the graphics driver might be the culprit, I attempted to install the latest nvidia driver.

Added repo ftp://download.nvidia.com/opensuse/11.4/ in Yast2.

Did a refresh and it complains that it cannot access installation media at the above. Paste the above in Firefox and it gets there OK.

One-click method also fails.

Never had a problem with updating nvidia driver before. Not sure what to check. I did delete and add with no success.

BTW, the other defined repos in Yast2 work fine.

View 3 Replies View Related

OpenSUSE Hardware :: Nvidia Driver Gives Gdm Failure On Fresh 11.4/Gnome Install (GT430 Card)?

May 8, 2011

I have spent ages looking at similar problems but not not quite the same. I have installed 11.4/Gnome (x86) and wanted to use my GT430 card. I went here: 'http://en.opensuse.org/SDB:NVIDIA_drivers' and used the 'one click' install for current cards. All went ok until I rebooted and I got a 'gdm[1239]: WARNING: GdmDisplay: display lasted 0.846578 seconds' message. I got five of these in succession until the 'gdm[1239]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors' appeared and it popped me down to an init 3 login.

So, I deleted the blacklisting conf file so that I could get back in to Gnome on Nouveau (which I did ok). I then noticed there was no /etc/X11 Xorg.conf file so I ran /usr/lib/nvidia-xconfig to generate one (which it did) - but it made no difference. I am at a loss know after spending 8 hours on this. Any pointers would be greatly appreciated. My machine is still at fresh install state so even if I have to reinstall 11.4 it does not matter.

[Code]...

View 5 Replies View Related

OpenSUSE Hardware :: Configure The Kernel Source Files In Order To Be Able To Install Nvidia Driver?

Jun 27, 2011

When trying to install the nvidia graphics driver I get the following error-message:

ERROR: The kernel header file '/usr/src/linux/include/linux/version.h' does not exist. The most likely reason for this is that the kernel source files in '/usr/src/linux' have not been configured. How do I configure the kernel source files?

View 3 Replies View Related

OpenSUSE Install :: Higher Framebuffer Resolutions Not Available During Bootup/console - Nvidia Properietary Driver?

Jun 26, 2011

I'm using the 270.41.19 nvidia properietary driver for my Geforce GTX460 graphics card. I have a Sony TV connected to my HDMI and I know it supports the 1920x1080 resolution. Yes it works after gnome or other DE loads up.

But during the GRUB screen and the bootup console - It defaulted to a 640x480 resolution (as it always does with the nvidia prop driver). I usually used to check the output of hwinfo --framebuffer and choose the resolution by appending the right vga=0xabc parameter.

But now I have a problem since hwinfo says the best widescreen 16:10 framebuffer resolution that my card supports is 1280x800. Here is the output from hwinfo --vbe which should give the info about both my gfx card and my TV.

The initial nouveau driver was able to output native 1920x1080 during the bootup on the console without issues, so I guess even the properietary driver should be able to output (If my understanding is right the nvidia module loads later during the bootup and only is required for the X but not for the console itself).

[Code]...

View 3 Replies View Related

Fedora :: Does Not Start After Installing Nvidia Driver

Jul 30, 2010

I installed nvidia graphics card on my fedora 13. It is not starting since then. Just the logo of fedora comes up, progresses, and it stops. What can be done to boot the os?

View 2 Replies View Related

General :: Can't Get X To Start And Can't Get The Nvidia Driver Installed?

Mar 27, 2010

I have for like 4 days now been doing a SourceMage 10.0 install on my K7 PC. I cant get X to start and cant get the nvidia driver installed

1) which Nvidia driver to use?
Heres my PC's specs
http://multidistro.com/K7
Also, I have made a .xinitrc for LXDE in /home,etc
and have it all set up; but X wont run
I am trtying to use driver legacy 96xx

[Code]...

View 11 Replies View Related

OpenSUSE Hardware :: Short Freeze's On Machine's With Nvidia-Card & Nvidia-Driver?

Aug 8, 2010

The freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.

System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,

View 6 Replies View Related

OpenSUSE Hardware :: NVIDIA Driver From NVIDIA Repository Supports Cuda?

Jul 29, 2010

Does somebody know if the NVIDIA driver from NVIDIA repository supports Cuda?

View 2 Replies View Related

Ubuntu :: Uninstall The Nouveau Driver And Install NVIDIA-x86-71.86.14-pkg1.run For Old Nvidia TNT2 Card?

Nov 30, 2010

Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:

Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.

View 3 Replies View Related

Debian Multimedia :: X Won't Start After Installing Nvidia Driver

Mar 27, 2015

I tried to install drivers for my GeForce GT 630M graphic card. At first, I just installed nvidia-detect and there was a suggestion to install nvidia-driver:

Code: Select allsudo apt-get install nvidia-detect
nvidia-detect
sudo apt-get install nvidia-driver

After reboot, there was a sad ?monitor like this one: [URL] ....

After first failure, I tried to use Debian wiki tutorial for Debian Jessie (probably I should have done this at first )

Code: Select allaptitude install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') nvidia-legacy-304xx-kernel-dkms
echo -e 'Section "Device"
Identifier "GPU Nvidia"
Driver "nvidia"
EndSection' > /etc/X11/xorg.conf.d/20-nvidia.conf

But also without success. Now I can't use X at all.

View 7 Replies View Related

Ubuntu Multimedia :: X Does Not Start After Nvidia Driver Installation On 10.10?

Feb 16, 2011

I am trying to install ubuntu 10.10 on my new computer: an Asus U33Jc. It is a 64bit machine. Everything seems Ok until I try to install the nvidia drivers. First, I tried to install it through the graphical interface as it popped up shortly after the install. Then, I tried to install the most up to date driver (290.19.36) found on nvidia's website. In both cases I get the same problem.

When I boot the computer it freezes at startup typically at the stage: "Checking battery state..." but not only (sometines before or after). In any case I never get to a graphical interface. I looked at many forums on the web (here here here and here for instance). But no solution work so far. Apparently there is a conflict with nouveau so I have blacklisted it. It seems the computer does not send the information on the good output, so I tried to twick my xorg.conf in different ways without any result.

View 2 Replies View Related

OpenSUSE Hardware :: How To Clear Proprietary NVidia Driver And Replace With Nouveau Driver

Jun 13, 2011

There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.

Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.

View 9 Replies View Related

Fedora :: After Installing Nvidia Driver FC12 Not Able To Start System

Mar 9, 2010

I just install FC12 after all settings are done I install nvidia driver for PAE kernel whit the command # sudo yum install kmod-nvidia-PAE after reboot the system is not able to boot again.What I can do to uninstall the driver?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved