I'm currently running a dual boot (VistaFedora 11) system. I've noticed that the first time I access files on the Windows partition (via Nautilus GUI) I'm prompted for root access. However, on subsequent attempts to access the Windows partition I am NOT prompted for root access (even after I close/re-open Nautilus). My concern is that I'm leaving my root access "open".
View 4 RepliesIs it possible to forbid a non-root to umount a partition that was mounted via fstab-entry?
View 2 Replies View RelatedWhen creating 10 samba users I also created Linux users. I do not want these Samba users to be able to use putty, winscp etc to access the server.
Do you know how I can restrict ssh access to specific users?
I would like to know if it is possible to deny the access to a file for root? Would ACL's be a possibility? I have "googled" around but haven't found anything interesting (except SELinux). I should secure a password file to an important database.
View 6 Replies View RelatedI have an ADSL modem and router, its OS is linux. It runs ftp service, and I can read files in its file system, but I have no permission to list files and to write files. It has TR069 protocol connections and can upgrade remotely.It has ssh, but not started.
View 1 Replies View RelatedI temporarily placed a Back in Time backup into the root partition, by running it as root.However, I couldn't get it back out on the Desktop, so I opened a terminal window and ran 'sudo nautilus', which I now know should be avoided. I couldn't bring up "Properties" of the root folder, but I was able to open it and see the backintime folders. I then clicked on root, which was in the toolbar row "< root backintime" and was able to get full access to properties. I flipped folder access to "create and delete files" for Otherter disconnecting from the network, and moved the folder to the Desktop. So, is this correct or is it inconsistent that I could open root from the toolbar and not from the folder listing when opening 'filesystem'?
View 6 Replies View RelatedI just installed gufw and was in quite a hurry. A root acces prompt came up as I started gufw for the first time, and I quickly responded with appropriate password. All I saw in this hurry was that it had something to do with the usr/share directory.So, here's my question: Does gufw require root access when first starting up
View 6 Replies View RelatedI get the problem to acess root password when i am in user login, means wahen i am in user login and want to install software from terminal then he asked root password, when i supplied root password but he give me login incorrect.
View 2 Replies View RelatedI have tried to not allow root access and have created a wheel user.
Now I can not logged in as root.
Its okay but when am logging as wheel user and trying to access root then it says:
Code:
I am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. From left to right, the Windows partitions are one partition for Windows booting, one for Windows OS and software installation, and one for data which is planned to mount on Ubuntu. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right?
View 1 Replies View RelatedI have vista and opensuse 11.2 on my computer, the problem is i can't open ext3 partitions from vista but i can the other way. I tried Ext2fsd but the linux partition is always in a read only mood even when i change this option. Also, all folders are empty I downloaded the program as admin and compatable with XP SP2.
View 3 Replies View RelatedI have been trying to use my DS2490 USB to serial device with a Maxim .DG1921G thermocron with owfs. It is supposed to give me access to a virtual file system for the thermocrom without needing to launch owfs as root.
Code:
/var/log/messages gives:
Feb 8 16:22:45 norman-HP-G56-Notebook-PC kernel: [ 236.140141] usb 5-1: new full speed USB device using ohci_hcd and address 2[code]....
but if ds2490 module is loaded it works when run sudo.It seems from this that it is a lack of permissions to USB but I have tried all the methods on at http://owfs.org/index.php?page=udev etc. to overcome this and a few others but none work.I am running Ubuntu 10.10 kernel 2.6.35-22-generic #33-Ubuntu SMP
I found this on Bee's website. For more info on this exploit there are links there:[URl]..All you have to do in Fedora 13 is enter the following lines in a shell as normal user:
[Code]...
I don't think this can be considered solely an "upstream" problem, because I first tried it in Arch using the same version of glibc, and the final command causes both gnome-terminal and xterm windows to disappear.
I created 3 partitions on my usb stick, one is vfat, one ist ntfs and one is ext4.And i formated them like this:
Code:
mkfs.vfat -F32 /dev/sdg1
mkfs.ext4 /dev/sdg2
[code]....
I installed Fedora on a VMWare, hosting OS is Windows 7
How can I access Disks and NTFS Partitions on the Host OS "Windows 7"
From Fedora?
By fiat I must distribute my homedirs across multiple physical disks/partitions. Unfortunately this is not open to discussion so obvious solutions like a lvm home partition are not available to me. The issue: Users created with homedirs on the main home partition (the one created as home during the f13 install) behave as expected, but if I create them on a different partition (home9 for the sake of this example) the users are not able to login (dropped back to login screen), nor run x-apps if su -'d to in a konsole.
If I 'su - <user-on-home9>' in a konsole, I get delivered to the /home9/<user-on-home9> as expected, but x-apps fail with the error: 'cannot open display: :0'. This can be temporarily fixed with the command 'xhost +SI:localhost:<user-on-home9>', but I would rather fix it permanently at the source.
This appears to be an selinux problem from the following.The contexts of the the two rootdirs are the same
% ls -Zd /home /home9
drwxr-xr-x. root root system_u:object_r:home_root_t:s0 /home
drwxr-xr-x. root root system_u:object_r:home_root_t:s0 /home9
but when I create the users (using useradd or the gui) their respective contexts differ:
% ls -Zd /home/user5 /home9/user6
[Code]...
So, my questions for you selinux experts are 1) is it possible to have homedirs spread across multiple partitions with selinux, and if so, how, 2) Why, even when I manually set the dir/file contexts to match a properly functioning user5 from /home, do users from /home9 still not work (as far as login and x-apps).
I'm dual booting Mac and Fedora 11. My music is on the mac side, and is too large to copy to the Fedora partition. What is the best option for sharing between the two partitions.
I used to copy the itunes folder to public, but that allows anyone access.
What's the best way to do this without allowing complete access?
i have a fedora 11 server which can't access the ext4 partitions on lvm logical volumes on a raid array during boot-up. the problem manifested itself after a failed preupgrade to fedora 12; however, i think the attempt at upgrading to fc12 might not have anything to do with the problem, since i last rebooted the server over 250 days ago (sometime soon after the last fedora 11 kernel update). prior to the last reboot, i had successfully rebooted many times (usually after kernel updates) without any problems. i'm pretty sure the fc12 upgrade attempt didn't touch any of the existing files, since it hung on the dependency checking of the fc12 packages. when i try to reboot into my existing fedora 11 installation, though, i get the following screen: (click for full size) a description of the server filesystem (partitions may be different sizes now due to the growing of logical volumes):
Code:
- 250GB system drive
250MB/dev/sdh1/bootext3
lvm partition rest of driveVolGroup_System
10240VolGroup_System-LogVol_root/ext4
[code]....
except he's talking about fake raid and dmraid, whereas my raid is linux software raid using mdadm. this machine is a headless server which acts as my home file, mail, and web server. it also runs mythtv with four hd tuners. i connect remotely to the server using nx or vnc to run applications directly on the server. i also run an xp professional desktop in a qemu virtual machine on the server for times when i need to use windows. so needless to say, it's a major inconvenience to have the machine down.
I have a fedora 10 server to which I can ssh as the root user using RSA.
However for any user other than root a password is always requested.
I have made changes to PAM and check the rights to all the files and read pages upon pages. I can mess it up completely so no one can login but cant get it so that anyone other than root can use a public key.
Another interesting and may be related item is that when any user logs in, with a password, via ssh then they get the error:
Could not chdir to home directory /home/xxxx: Permission denied
But they can cd to their home directory and have no problems.
I am thinking that this may be to do with the mount. The home directory is on a HDD but the system dive is an SSD.
I have gone over everything so many times I am now lost, I must be overlooking something so simple and obvious its just not coming to mind.
i still can't see quite well the security reason for not allowing one logging in as root on Fedora, but anyway...how to become the root on my system, Fedora 10, please?i did open a terminal and typed s - root then my password, now im the root, but only on the terminal, as CLI, but what if i want to change the munu.lst inside grub i.e.? and some other files or settings that there's no option to just type in the root password, how to overcome that please?
View 9 Replies View RelatedIn other UNIX-like OS I can go to an rc file (like kdmrc) and find the line "Allow root access at login=no" and change it to yes. How would I do this in Fedora-12, or what do I need to do to obtain permanent root accessed including with-in the GUI and not just at the command-line. I use only GNOME for Fedora-12
View 1 Replies View Relatedneed it for a project. basically, im working off a cluster that runs on linux, i dont really know what distribution it is, but i dont think it will matter too much. Im trying to install something. I dled the source code did "./configure"d then i went into src directory and did "make install". the error message is that, i cannot create the directory /usr/local/lib/vmd. so...i believe this is because i am my own user and not the root...is there anyway to get around this? i need to install this and avoid asking the root user to do it for me
View 3 Replies View RelatedIf there is a general NFS share in the LAN and for example this share has three files - a, b, c is there any way to restrict file access to the root user of e particular host(falcon) in the same LAN environment while the normal users from the same host(falcon) should be able to access the NFS share & files a, b,
View 3 Replies View RelatedRecently I have installed FEDORA 14 genome on my toshiba sat. L510 laptop.I am using windows 7 ultimate on the other end.My laptop in working fine with both OS.When I tried to install my mobile BB i.e. ZTE USB modem
We need 3 packages1. usb_modswitch2. usb_modswitch.data3. wvdialAfter that I tried to edit the /etc/wvdial.conf to put the[Dialer cdma] details........it asks for root access.I have tried to gain it from terminalused command
[localhost@arul]$su -l
login: root
password: arul315
[code]....
I have a problem, I have installed Fedora 11. And i need to login as root user.
How to do so?
what does one do when he forgets the root password ? i still have a terminal logged in as root how can i change the password in terminall
View 2 Replies View RelatedI am using Fedora 10 .Generally to update I open a virtual console by pressing Ctrl-Alt-F2,login as root and give the "yum update" command.Then I continue using my graphical terminal for other tasks from the 'non-root' account..Now my room-mate comes uses my 'non-root' account to browse web for few minutes and then opens a terminal types "halt", ENTER and viola...! My root account seems to be insulted by a 'non-root' user!.When I am doing updates or other important work as root any silly user can just 'halt' my computer. Can somebody tell me how to set up my computer so that when root is logged in no other user can simply halt the computer.
View 3 Replies View RelatedCan the audit daemon (auditd) be run by a non-root user? I'd like to create a special user who only run the audit daemon. Is that possible?
View 1 Replies View RelatedI have been experiencing harassment with my websites being hacked so pardon me if this is an over-paranoid question.
Just recently started on FC11 after having abandoned Fedora for CentOS for a few months. So glad to be back, but...
I have been getting notices about security updates. When I click for the update, I am not asked for the root password and the update occurs.
fedora 10 and im trying to set up some user accounts on a computer. My current problem is that we set up 2 root accounts and we need both to be able to authenticate. So far this works on the command line but whenever i'm on the GUI it seems that it only allows root to give its password for things. How do i enable the second account to do that as well.as a note, i am doing this for someone else so i have little to no control how this is set up, so please, i am not looking for reasons why this is not a good idea i would just like to figure this out
View 2 Replies View Related