I`m running Lucid on my laptop. Now I wish to install WinXP in dual-boot mode, but it says there are no suitable partitions for it. I`ve tried to install it on existing ntfs partitions as well as to create a new partition with windows partition manager (the one that is offered in the beginning of the installation), /sda7 is the result, but it won`t help.
View 9 RepliesI got a laptop that I'd like to install Ubuntu on (I've done this numerous times before). But this one already has 4 partitions on it, and the Ubuntu installer complained that you can't have more than four. I know you can make a logical or whatever partition that holds others sub-partitions, but I'm not sure the best way to do it without destroying data from the other partitions.
The existing partitions include: a recovery partition, the primary windows partition (large size), a small boot partition, and a special partition for hp software that can run without booting windows. Can I convert the windows partition into a logical partition or something like that which can be divided up, without wiping out the windows files and data there?
And yes I know I can use the wubi installer, but I prefer a more permanent solution (Ubuntu is my primary OS, but I don't want to wipe out Windows at this point).
I installed on LUKS+LVM, and I want to preserve my /home without moving the data to any external media (I don't have any). My partition layout is as follows:
sda1: /boot
sda2: encrypted volume (sda2_crypt)
sda2_crypt: LVM volume group, with /, swap and /home.
Having many previous (sad) experiences with completely borked experiments and data loss, I've decided to try the trick in VirtualBox first. I've installed Debian (testing, netinst, Dec 2009) with encrypted LVM, and touch'd a file in my $HOME so that I'd know if the contents were preserved. Then proceeded to install Ubuntu 10.04.1 from the alternative CD. After the installer started and loaded some of the basic components (but before it entered the partitioner) I've switched to a shell and read a scroll of identification:
Code:
$ cryptsetup luksOpen /dev/sda2 sda2_crypt
[entered the passphrase]
$ lvm vgscan
$ lvm lvscan
* Another concern; after the installation, I've noticed that the contents of my $HOME were overwritten by Ubuntu's default skeleton (pictures, desktop, music, templates, and other crap). The control file I've touch'd after installing Debian wasn't there.
Due to a combination of factors, if installing from the Live CD, you must have at least two partitions available. One will be a small (around 200 MB) /boot partition. The / (root filesystem) partition must be formatted as ext4 while the /boot partition must be formatted as ext2 or ext3.
The normal installation CD set and DVDs don't have this issue.
If you choose to install the Live CD and don't follow this scheme (you can, of course, have additional partitions besides /boot and /), the LiveCD won't install.
I played a bit with partitions. I'm not an experienced Ubuntu user, neither I have solid understanding of partitioning. And I hardly remember exact actions that led to this problem. I remember that I saw a warning in GParted that said that the partition was out of bounds or something.. But I followed some solution that I found on ubuntuforums and used fdisk to fix that. So, after installation of Ubuntu I couldn't boot into WindowsXP (after choosing Windows entry in grub2 menu I see only blinking cursor on black screen). But what's more important that I can easily mount Windows partition from Ubuntu. Also I tried to boot from Windows repair console and used FIXBOOT command, and copied[url].... and [url].... files to no avail..Here is the summary of what I got now:
Code:
sudo fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders[code].....
To do this, I would like to recursively download all the pages within the domain, such that their link structure is preserved. This would be tedious to do by hand, however. As it stands, I could probably use wget for this, but I would prefer something more specially designed for site downloading. I have already tried webHTTrack, but found it unsuitable. Perhaps httrack with a particular set of command line parameters would work better?
View 3 Replies View RelatedI'm trying to dual boot F14 along side of Win7 and I'm running into partitioning errors - "Could not allocate requested partitions: not enough free space on disks" I used the Win7 Disk Management to shrink the C: drive by 100G, and the Disk Utility in F14 shows the unallocated space. Here is what the current layout looks like:
--210Mb bootable (sda1)
--168Gb (sda2) --Win7
--105Gb unallocated -- Future home to F14
--31Gb extended (sda 3) -- not sure what this is used for
--31Gb (sda 5) -- Lenovo drivers
--16Gb (sda 4) -- Lenovo restore
Am I running into the partition limit I have been reading about? If so, is there a way to get around this? I really don't want to delete the partitions yet.
I used Ubuntu before, without problems but since the 10.04 version it won't recognize my partitions. I formated my laptop and partitioned it, installed Windows 7 64bit, which I need for my work, and wanted now to install Ubuntu 10.04/10. I then used GParted to check my Harddisk and it is having troubles to recognize my partitions, too while Windows finds them. GParted is giving me an error message saying my partitions are oversized. I am still in the beginning of my Linux experiences and so I don't know what to do. I have two 250GB harddisks (how Windows recognizes them),
[Code]....
Xubuntu 9.04 installation CD not detecting any of the current partitions. This all started when I reinstalled windows XP a few days ago.After, the computer wouldn't boot into GRUB and would boot directly into windows.Other threads have dealt with a similar issue, that of overlapping partitions causing libparted/parted/gparted to detect the whole drive as unallocated space. The problem in these threads seemed to be a corrupted partition table, in which the partitions overlapped with each other. So of course I checked the output of fdisk -l for overlapping partitions, but I don't see any obvious overlapping partitions. I've noticed that the partition that used to be linux swap isn't showing up in the partition table at all. I might just be missing something simple here and would like another set of eyes to help me figure this one out. Does the problem have anything to do with the partition table being out of order (ie. not in order of what regions they cover on the drive)? From the liveCD I've run
Code:
sudo fdisk -lu
sudo sfdisk -d
sudo parted /dev/sda print
and have received the following output:
Code:
ubuntu@ubuntu:/mnt$ sudo fdisk -lu
omitting empty partition (5)
Disk /dev/sda: 60.0 GB, 60011642880 bytes
[code]....
I am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. From left to right, the Windows partitions are one partition for Windows booting, one for Windows OS and software installation, and one for data which is planned to mount on Ubuntu. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right?
View 1 Replies View RelatedMy computer is currently running on Windows 7 and I had a spare partition formatted as ntfs. At first I tried to install ubuntu to that partition. Everything was fine, ubuntu recognized my previously installed OS and all partitions. At some point during the installation, however, it is recommended to have another partition formatted as swap.Then I split the partition into two parts and formatted one as swap and one as ext3 using Acronis Disk Director.
Then I restarted my computer to install ubuntu to new partition. This time it did not recognize any of the partitions and said that "there are no operating system on this computer." The whole disk was appearing as one partition.At that time, I quitted installation and go back to Windows 7, it was working properly. I booted using Acronis Disk Director and partitions were in their proper place.I tried formatting back to ntfs and then to swap and ext3 again, nothing changed. (I also tried several other combinations, nothing worked.)
This might be a really silly question, but I installed Ubuntu yesterday (which is awesome) but I can't seem to locate any of the other drives that I had hooked up. It's as if the partition with the install is the only one in existence. Is there some trick of the trade I'm not aware of or what's up?
View 1 Replies View RelatedThere are 4 drives in my PC. now i have installed natty on it and I can't see other drives except the filesystem. Any tool that can make all my partitions visible. I used live CD to install Ubuntu 11.4
View 8 Replies View RelatedI have Installed windows 7 over windows xp in the first partition (primary) and I lost linux partitions and there are two ntfs partitions didn't deleted.want to recover linux partiotns becose they have important data ,or recover files from deleted partitions.used opensuse DVD trying to recover grub but it says there are no linux partitions.
View 9 Replies View RelatedI want to create a separate partition for /home.inuxMint is *already* installed.PartedMagic be used for the same, NOW
View 14 Replies View RelatedMy partition layout is as follows:
sda1: 14GB / ext4
sda2: 10GB /iso ext4
sda3: 4GB /home ext4
sda4: 86GB Extended
sad5: 2GB swap
I have 84GB free space on this hard drive and want to install another distro. Will I be able to create another / and /home partitions for the new distro?
while installing ubuntu i made two partitions and set two load points. //home/but in ubuntu there is only one partition shown(filesystem).. what is going on?
View 5 Replies View RelatedPlease bear with me as I'm incredibly new to Linux and shell scripting and all that good stuff. This will be a fairly lengthy post, as I don't really know which information is pertinent to the problem at hand and which is irrelevant. I installed Ubuntu on my Macbook following the instructions on this page: [URL].. At step 7, /dev/sda3 was not in the dropdown menu of options, so I picked...I can't remember. Either /dev/sda or /dev/sda2. I think this may be the beginning of the root of my problems. Step 8 is where it all falls apart. I get the following error message: "Status: MBR partition table is invalid, partitions overlap. Status: GPT partition of type 'Unknown' found, will not touch this disk."
Sooo since I can't sync the partitions, I can't get Linux to load unless I'm loading it from the LiveCD. I've tried steps 1-10 on this page:[URL].. However, under step 4, I could either "Save" the file randomly, without actually saving it to /mnt/root, or I could just open it and run the installer. I think I went into FF preferences and changed it to let me pick where each download would be saved, but when I actually clicked on the download link and then "Save", after finding the folder and clicking the final button (Which I think actually said "Open" instead of "Save"), nothing happened. I tried running the rest of the steps after just opening the installer on its own, but of course just got error messages. I hate not being able to troubleshoot this on my own!
The instaler doesnt find my partitions and the XP that is installed too! For some reasons i cannot delete the whole hdd... if i format the partition, where (i want to install ubuntu) with fat, the pc crashes during the installing process after the tastaturlayout question! if i try some other formats, the installer tells me, that there are no Operating Systems installed and the hdd is unpartitioned!
if i start ubuntu live from the cd, the system finds all partitions, but if i run cfdisk in a terminal, i get a fatal error (cannot open disk space)... My machine is a acer aspire 1694 WLMi (pretty old, but should be no problem), bios is up to date, Windows is XP home edition with SP3.
After a fresh install of 7.7.0 (amd64), I'm unable to boot into Debian. I get the following error constantly when booting in recovery mode:
(snip) [drm] nouveau (snip) PMC - unhandled INTR 0x44000000
A bit of Googling seems to indicate that this is due to my video card (Geforce GTX 750Ti). Unfortunately, my motherboard doesn't have any monitor ports, so I'm forced to use a video card in order to use a monitor. Something I didn't foresee being an issue, but what can you do. How should I resolve this? Is there an ISO that has the (presumably non-free) drivers included? A way I can add the drivers during boot (I am able to boot into my Windows partition by changing the boot order, don't know if I can do anything useful from here)? Or do I have to do something crazy like buy/borrow an older video card just so I can properly boot into Debian, and then install the drivers?
I've got a secondary problem: GRUB has my Debian install as the only option, even though I had Windows 8.1 installed first. I don't know if this is related to the problem above, or it's a known problem with newer versions of Debian and/or Windows (and I have to update the menu.lst or whatever myself), or if it's due to the way I set up partitions. My current setup is:
SSD:
- Windows boot partition
- Windows main partition
- Debian / partition
- Debian swap partition
HDD:
- Debian EFI partition
- Debian /home partition
- Unallocated space (will eventually be a NTFS partition for shared storage)
This is the first time I'm using a motherboard with EFI/UEFI. It's also the first time I have an OS taking up partitions on multiple physical devices. I don't know if either is the cause of GRUB not detecting Windows.
I have vista and opensuse 11.2 on my computer, the problem is i can't open ext3 partitions from vista but i can the other way. I tried Ext2fsd but the linux partition is always in a read only mood even when i change this option. Also, all folders are empty I downloaded the program as admin and compatable with XP SP2.
View 3 Replies View RelatedI've installed Arch Linux onto my Western Digital SATA drive.I love it, best ever, however, I need the fglrx proprietry driver for better 3-d performace, and decided to create a new partition. I decided to install Linux Mint.Sadly, in all my noobishness, I forgot about the 4 primary partition limit (oops!) and as I have /, /home, swap, and /boot partitions (all primary) already installed, I have run into a bit of a problem.I resized my /home partition (almost 500GB) to about 225, and was then told I have over 200GB unusable space. Is it possible for me to change at least 1 of my primary partitions to logical partitions AND keep all the data intact (AND edit the arch configuration so that it'll still work) so I can install a second linux? I sincerely doubt it
View 10 Replies View RelatedI made 2 partitions in windows xp (40gigs for xp, the other 200gigs or so for linx)I've tried installing linux numerous times, but can never get it to find the partition to install to. Is there a special way you have to set up a partition so you can install linux on it?
View 9 Replies View RelatedI have problem with XEN Citrix server I can not understand ; what is sda2 and sda3 partitions ?
Code:
root@cl-500 ~]# fdisk -l
Disk /dev/sda: 2000.4 GB, 2000407625728 bytes
64 heads, 32 sectors/track, 1907737 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
[Code]...
I am having a 250 GB hard disk in my Acer Laptop.
C: - a 65 Gb partition with Win7.
D: - a 150 GB partition with general data.
and 2 partitions by default - a 13 GB and a 3.5 GB one( I guess backup and recovery by Acer or sumthn)
I shrank the D: partition to 135 GB and had made the 15 GB unallocated space to install Ubuntu. Everytime I checked I got the free space shows as 'unusable' in the Ubuntu partitioner. I tried shrinking again with EPM, Win Disk Management and also Ubuntu partitioner. Each time the free space which showed up said Unusable. A friend of mine advised me to defragment and use 'GParted' through the live cd. I did so and when click on the unallocated space to format it said "IT IS NOT POSSIBLE TO CREATE MORE THAN 4 PRIMARY PARTITIONS. If you want more partitions you should first create an extended partition. Such a partition can contain other partitions. Because an extended partition is also a primary partition it might be necessary to remove a primary partition first."
I didnt know all of my partitions were primary! And I dont even want D: to be primary. It just is there to hold some data.
I want to install ubuntu 9.10 on my HP nx9420. I left 48GB of unallocated space in between of windows and hp recovery partition. I attached screenshot of GParted. I need to make /dev/sda7 the home partition.
View 3 Replies View RelatedI am trying to install Ubuntu 10.04 on my Desktop and I am unable to see any partitions when trying to install I also checked to see if the partition manager would be able to see them and no luck there either.I already have windows xp and OpenSuse installed on the hard drive.
View 8 Replies View RelatedI have a machine (Asus P4PE + 120GB SATA HDD) which has been running Karmic very successfully for a long time. I recently made the decision to upgrade to Lucid via the Update Manager. The upgrade seemed to go OK - no obvious errors - but the resulting version of Lucid had some weird problems: desktop messed-up, printers wouldnt work any more, etc. So I concluded I had been unlucky - the upgrade had gone wrong and I tried to install Lucid afresh from a CD.
Every time I try this, the install gets to the page to specify partitions but this page is blank. No partitions are visible. The buttons to create a partition, etc. are all greyed-out. I have tried various boot options like removing quiet splash, setting noapic/nolapic, etc. but nothing seems to work. I can happily run Lucid from the CD, no problem. I have also checked I have not got RAID accidentally installed, as mentioned elsewhere on this forum.
I am able to reinstall Karmic so I know theres a filesystem there but the Lucid installer cannot see it. Any suggestions on how to proceed very welcome!
At the moment my only option seems to be to regress to Karmic.
I'm doing a fresh install on my netbook and have purchased an 8GB SD card to expand storage space. I'm curious as to which directories can be mounted on the SD card without affecting performance as the write times and such are much lower on the card. I know that /home and /tmp can be mounted there.
View 5 Replies View RelatedI decided to go and install ubuntu 10.10 today. I have two partitions on my HDD. Ubuntu only sees one HDD, and not the two partitions. I get no option to dual boot vista and ubuntu at all. It is only format and use the entire disk, or install manually. I go into gparted and all ubuntu sees is one unformatted HDD. But vista sees two partitions. I have all of my media on one partition. I REALLY don't want to go and format the entire drive to lose my things. Is there a work around for this? I have no access to any other PC.
View 4 Replies View Related