I just walked into a system that has a yum repository with both the 64-bit and 32-bit RPM's all in the same directory. I've never seen this before so it seems very wrong to me. Is this a problem or should it be ok?
View 2 RepliesI am using Fedora 13 and I have one program (wine) that I need to start grabbing for the updates-testing repo instead of the default repositories in order to get newer versions. I think I can figure out how to add that repository, but I need to know if there are any others I need to disable or any other changes I need to make to my system so that I don't confuse my set up with conflicting updates.
Also, is there anything special I need to do to be sure that only that one program is grabbed from the testing repo when I run regular updates?
i'm attempting to know and understand fedora more and i will spend probably the next month pouring through all the forums and documents to answer more of my own questions. but there's quite a bit here, so i'd thought i'd ask some noob questions to get me started a little.
ive installed fedora 14 64bit and chosen only kde as the desktop. i selected an extra 2 repos besides the default, fedora 14 -x86_64 and fedora 14-x86_64 -updates. i believe this kernel is installed: 2.6.35.11-83
1. i can only see the 2 extra repo's as being "checked" in kpackagekit, shouldn't i see the default repo also ?
2. i dont have an applet in the system tray indicating the system is up to date, does fedora have this by default ? also after a clean install i ran yum check-update and yum update but the message sayes: "no packages marked for update". i'm not sure if the system is auto-updated during install or not, but with other distros iv tried there is always atleast a few updates needing to be done after install.
3. is kpackagekit the fedora gui package manager ? i dont see any others.
4. i want to upgrade to nvidia drivers, but i think i am missing a non-free repo or something. when i enter: yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64 i get messages stating "no package" i get the same message with yum install nvidia-settings.i also tried this: LANG=C yum --enablerepo=rpmfusion-nonfree info akmod-nvidia but it sayes repo not found.
Will KDE4.4 eventually move into the 11.2 updates or do I have to add the KDE Factory repo to get this update?
View 3 Replies View RelatedI just learned that warsow 0.6 is out, and went to see if it was available in the ubuntu software center yet, as opposed to going and downloading and installing it manually from the warsow website. The ubuntu repo's still have version 0.5, and at the bottom of the page it says:
"Updates: Canonical does not provide updates for Warsow. Some updates may be provided by the Ubuntu community."
So if I wanted to 'update' this item in the repo's for the better of the community what would that entail?
Each time i type yum search <something> .. some 2 to 3 mb are dloaded.. is that updates of the repos configured? how do i stop it updating each time ?
View 3 Replies View RelatedI need to installing updates on fedora in my computer.
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
The following packages have no delta rpms in 11.2: acroread - Adobe Reader ,java-1_6_0-sun, java-1_6_0-sun-plugin, Opera Web Browser, flash-player A quick check on 11.0 and 11.1 update repos shows that there are delta rpms for latest acrobat reader, sun java and opera updates. Is this a new Novell/openSUSE policy and has there been an anouncement made to inform users.
View 7 Replies View RelatedThe repository [URL] is not currently (or no longer) valid. The path still exists up to the "Contrib" level, however, there are no files or subdirectories under it. There are also two siblings at the "Contrib" directory level ("Live" and "Update:") and there are no files under them either other than a single subdirectory called "Test" under "Update:". Does anyone know if the updates that used to be available in this repository have moved and, if so, where to? If the repository is no longer required and there is no replacement, I'll simply remove it. I have also noticed issues for several months where the updater applet will go into an "updating" state and never return from it.
View 2 Replies View RelatedCurrently I have the latest stable KDE packages through two repositories:
Code:
KDE-KR46 | .../repositories/KDE:/Release:/46/openSUSE_11.4/
KDE-Extra-KR46 | .../repositories/KDE:/Extra/KDE_Release_46_openSUSE_11.4/
The priorities are:
KR46: 75
Extra-KR46: 85
Now the issue is about the openSUSE 11.4 Updates repo (priority 99). It shows newer packages version than the KR46 repos for some packages, therefore I'm not sure if I have to push Updates repo up in priorities or just forget its update messages an keep the KDE repos as first source.
Earlier I have no problems when I install opensuse. After installation the network runs and I can run online updating in yast for the system. But since a few version it doesn't work after installation and I don't know why. I think maybe the errors could happen because I have no
internet connection. Today I install 11.4 and get this message when I want to run online updates in yast.
There is an error in the repository initialization
'repo-update' [URL]
[repo-update URL]
Repository is not cached
I think this problem stars with 11.1 or 11.2.
I keep getting the following error when trying to install anything:
Could not retrieve mirrorlist http://mirrors.rpmfusion.org/mirrorl...d-11&arch=i386 error was
[Errno 14] HTTP Error 404: Not Found
Error: Cannot find a valid baseurl for repo: rpmfusion-free-updates
So this tells me the servers are down however if i put the link in FF I don't get 404.I am installing on a new box and I can't get the stuff I need.
How do i download and install updates? It says package not found.
View 4 Replies View RelatedYaST-->Software-->Online Update Getting error: There was an error in the repository initialization. 'repo-non-oss': Failed to cache repo (139). History: - repo2solv.sh "/var/cache/zypp/raw/repo-non-oss" > "/var/cache/zypp/solv/repo-non-oss/solv"
Output of zypper lr:
# | Alias | Name | Enabled | Refresh
--+-----------------------+-----------------------+---------+--------
1 | openSUSE-11.0-Updates | openSUSE-11.0-Updates | Yes | Yes
2 | openSUSE-DVD 11.0 | openSUSE-DVD 11.0 | Yes | No
[code]....
If I disable the repo-non-oss repository the update works fine. The URL I have for the repo-non-oss repository is:
Index of /distribution/11.0/repo/non-oss
This has been going on for over a week. Do I need to use a different URL for the non-oss repository? I live in New York, United States.
I wasn't paying proper attention when adding a repo to yast and need to find the file were the info is saved to delete this. The problem is that whenever i use yast it comes up with an error code saying that it can't find the data for the 'problem' repo. Have tried zypper rm but that comes up with a similar error advising that the data is in a format that was not expected. My thinking is to track the file were the yast repo source details are saved, delete this and then just add the repos that i use back.
View 6 Replies View Relatedcan anyone point me to a web host that would allow not only a site, but also a repo?
View 1 Replies View RelatedHow can I transfer these repos so that I can use them on linux? I simply just tried to copy and paste from windows to linux but no-go.
View 2 Replies View RelatedI can't load the Debian multimedia repository, [URL], anymore in Synaptic. It says "404 Not Found." Did it change its address? I needed to download lame, and had to get it from another repository [URL] instead.
View 11 Replies View Relatedits regarding yum. I know yum is used to download from repository sites. And i must configure these repo sites under /etc/yum.repos.d/. But can i install from a non-repo site using yum?
I tried installing dynagen from sourceforge.net with the following link
[root@localhost new]# yum localinstall --nogpgcheck http://sourceforge.net/projects/dyna...fc9.noarch.rpm
Loading "downloadonly" plugin
Loading "installonlyn" plugin
[Code].....
why i am not able to download from the same site using yum ? can yum only download from repo sites ?
I need to install on Centos 5.5 GLIBC version 3.x.The installed and available version is 2.5 only.Does anybody know how can I use a beta repo from Centos6?
View 5 Replies View RelatedI mistakenly deleted the repo directory in the yum folder. Now my yum command does not work.i tried to rpmfusion but i couldnt find the rpm for fedora 7. How can i restore my repos. I didnt do any modifications. Only rpmfusion repo would do.
View 5 Replies View RelatedThis post concerns info found at [URL]. My question is: How do I get the patch. The author makes ref. to "his" git repo and the patch for TOR. I guess the patch allows the use of some compile time options that can harden the build. I looked through the change log of TOR and couldn't see any of the options referenced by Jacob in his post. I have read on the net that compile time hardening options are part of the gnu compiler, not the application to be compiled. Is this true?
View 5 Replies View RelatedFor some reason Update Manager is not installing updates as of yesterday.I have it set to check daily and notify if updates are available. It has been working without issues for well over a year now.
Update Manager tells me updates are available and presents the list of security, recommended, and other updates. All are selected to update, but when I select Install Updates in Update Manager it returns with a Reading Package Information window overlaid on the main Update Manager window - building dependency tree then reading state information and dumps me back to the main Update Manager window without performing any update actions.
I just changed repos back to a standard CentOS base repo due to the custom one I was using needing https, and due to a proxy issue, only have http.When I run yum update, it finds that the path for the mirrors is off slightly giving me 404 errors.
View 7 Replies View RelatedI am thinking about setting up a local Debian Repository mirror. I want it to mirror just the Debian Repo at [URL].. Anyone have any idea how much disk space I might need to do it?
View 3 Replies View RelatedThere are some updates in the Update Manager list which I do not install. Among them, some drivers for HP Printers (I don't know why this cropped up; I don't even use printers on my laptop), and gcj updates (I use gcc/g++ but not gcj). I unchecked them the first time I saw them on my UM list. However, for every subsequent batch of new updates, UM retains these updates and I need to uncheck them every time. How can I remove them totally from my UM list?
View 2 Replies View RelatedI'm having trouble getting subversion working on Centos 4.7. When I try to create a repository using:
Code:
svnadmin create /path/to/repo
I get:
Code:
svn: Berkeley DB error while creating environment for filesystem repo/db: Invalid argument
svn: bdb: Berkeley DB library configured to support only DB_PRIVATE environments
I've searched the Net, with little luck. Threads seem to suggest that Centos has this flag compiled into the Berkeley DB RPM by default; whereas SVN doesn't want it. Someone, somewhere, must have got this to work and I'm sure it's something really simple I'm doing wrong.
[code]....
updates manager constantly crash i tried gnome in safe mode and it doesn't work so i need some way to update the os untill hopefully one update would fix the update.
View 5 Replies View RelatedSo, it is my understanding that Ubuntu's automatic updates do not install ANY updates that are not "important security updates." For example, it did not upgrade me to Firefox 4 automatically; I had to do it myself (Don't all new browser versions usually contain new security features/patches? Oh well...That is a separate question entirely).
ANYWAY, is there some way to get the latest stable versions of all of my open-source software automatically (or at least all at once, on command), instead of just security updates? It seems silly to have to install new versions for every program manually.
Also, related/side question: Now that I have installed Firefox 4 myself (via apt-get by adding the mozilla-stable PPA), will I stop getting security updates for Firefox through the standard Ubuntu update manager?
Actually, a really thorough explanation of the whole automatic update system (or a link to one) would be great too.
The little red popup window (packagekit) from the lower right showed yum updates
I did a yum update and no updates!
I tried again this morning and no updates