I can't load the Debian multimedia repository, [URL], anymore in Synaptic. It says "404 Not Found." Did it change its address? I needed to download lame, and had to get it from another repository [URL] instead.
View 11 RepliesI have KDE 4.5.1 installed there are a few bugs I know they fixed in 4.5.2 but cannot find a repo with 4.5.2 or 4.5.3? Is anyone running either 4.5.2/3 and if so where did you download from?
View 5 Replies View RelatedI want to install Debian 5.06 64 bit on squeeze repo. Where can I find its netinstall ISO?
View 6 Replies View RelatedIs there stability advantages to installing the mint-meta-debian package from the repo below??? I have read that LMDE is safer than running Testing because there is less chance for breakage with LMDE. Less risky overall. Is that true?
# Linux Mint Debian Edition (I get Firefox from here)
# get the mint-keyring from the repo
deb http://packages.linuxmint.com/ debian main upstream import
i'm attempting to know and understand fedora more and i will spend probably the next month pouring through all the forums and documents to answer more of my own questions. but there's quite a bit here, so i'd thought i'd ask some noob questions to get me started a little.
ive installed fedora 14 64bit and chosen only kde as the desktop. i selected an extra 2 repos besides the default, fedora 14 -x86_64 and fedora 14-x86_64 -updates. i believe this kernel is installed: 2.6.35.11-83
1. i can only see the 2 extra repo's as being "checked" in kpackagekit, shouldn't i see the default repo also ?
2. i dont have an applet in the system tray indicating the system is up to date, does fedora have this by default ? also after a clean install i ran yum check-update and yum update but the message sayes: "no packages marked for update". i'm not sure if the system is auto-updated during install or not, but with other distros iv tried there is always atleast a few updates needing to be done after install.
3. is kpackagekit the fedora gui package manager ? i dont see any others.
4. i want to upgrade to nvidia drivers, but i think i am missing a non-free repo or something. when i enter: yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64 i get messages stating "no package" i get the same message with yum install nvidia-settings.i also tried this: LANG=C yum --enablerepo=rpmfusion-nonfree info akmod-nvidia but it sayes repo not found.
Will KDE4.4 eventually move into the 11.2 updates or do I have to add the KDE Factory repo to get this update?
View 3 Replies View RelatedYaST-->Software-->Online Update Getting error: There was an error in the repository initialization. 'repo-non-oss': Failed to cache repo (139). History: - repo2solv.sh "/var/cache/zypp/raw/repo-non-oss" > "/var/cache/zypp/solv/repo-non-oss/solv"
Output of zypper lr:
# | Alias | Name | Enabled | Refresh
--+-----------------------+-----------------------+---------+--------
1 | openSUSE-11.0-Updates | openSUSE-11.0-Updates | Yes | Yes
2 | openSUSE-DVD 11.0 | openSUSE-DVD 11.0 | Yes | No
[code]....
If I disable the repo-non-oss repository the update works fine. The URL I have for the repo-non-oss repository is:
Index of /distribution/11.0/repo/non-oss
This has been going on for over a week. Do I need to use a different URL for the non-oss repository? I live in New York, United States.
I'm running 32 bit and I keep getting the following error when attempting to install the flash player.
View 9 Replies View RelatedDebian 504 64-bit.Is Eclipse available on repo? In the later case where shall I retain the package for installation ? /opt ? Or /home/user ?
View 4 Replies View RelatedI am trying to get snatpanic to read the Linux mint dvd so i can use it as a repo, but it won't read it? Says its not a debian cd?
View 9 Replies View RelatedI have already created little .deb with a private key. And I am confused about the next step i.e. release
[1] If I simply provide the .deb as downloadable , then how can I provide the public key to the user, so that they can confirm the signature ?
Should I need to provide the fingerprint only ? What should they actually need to do ?
[2] If I create a repo with reprepro, then how can I sign the repo with my private key, and what should the users need to do to confirm the signature verification,
i.e. how can I provide the public key to the user ? and what should they need to do to access the repo for signature verification ?
I want to add a deb repo for Debian Lenny so that I can install libasound2. The name of the repo required is given as 1.0.22-2~bpo50+2. All the repositories in my /etc/apt/ources.list file begins with either deb http: or deb ftp. Do I write dep 1.0.22-2~bpo50+2?
View 4 Replies View RelatedI need to add universe repo on sources.list to install daa2iso for converting .gbi image to .iso image. On googling around I found; Code: deb URL...licid main restricted universe multiverse That is for Ubuntu.
View 4 Replies View RelatedThere are some programs that are missing in the packman repo for openSUSE 11.4 these are:
PACPL
Acetoneiso
furiusisomount
kdvdcreator
soundconverter
[Code]...
how to upgrade qemu and kvm to version 0.12 on repo?
$ sudo kvm | head -1QEMU PC emulator version 0.9.1 (kvm-72), Copyright (c) 2003-2008 Fabrice Bellard
$ apt-cache show qemu-kvm | grep VersionVersion: 0.12.4+dfsg-1~bpo50+1
I usually install chromium from the frickelpatz repo. On one previous update I noticed that other packages that had not been installed from frickelpatz were updated with packages from there (i guess frickel had a higher version number - k3b i think the package was). So I would like to see what other packages it offers so I am aware of which packages are at risk. failing that is there a way to tell apt that i only want to use the repo for chromium and its dependencies?
View 3 Replies View RelatedI added the Liquorix repo to try out the spiffy kernel. It didn't boot so I uninstalled the kernel and went on my way. I'd like to get rid of the repo entry in Synaptic but when I click on "remove" nothing happens. The repo is oddly not in my sources.lst file.
View 1 Replies View RelatedJust switched from stable to testing. To run a pure testing, can someone tell me if I have all the necessary repos below?
deb http://www.debian-multimedia.org testing main non-free
deb http://getswiftfox.com/builds/debian unstable non-free
deb http://ftp.debian.org/debian testing main contrib non-free
deb http://security.debian.org/ testing/updates main contrib non-free
deb http://www.debian-multimedia.org testing main non-free
deb http://mozilla.debian.net/ squeeze-backports iceweasel-4.0
I want to have most my system in Debian Stable and a few packages updated to a version that is not in Stable repos.For example Abiword. With the one in Debian Stable I have many issues.I could add Debian testing repos and update it, but then I will have to upgrade to testing a lot of programs that I didn't intended to upgrade.ex: Abiword in testing may requiere libc6(testing) and with that I would have to upgrade a lot of programs that will not work with a newer version of libc6.
View 4 Replies View RelatedDebian 504 64-bit
Emacs 22.2.1
I have emacs running on the box
$ apt-cache policy emacs Code: emacs:
Installed: 22.2+2-5
Candidate: 22.2+2-5
[code].....
I'd like to include the backports repo and the backports kernel in a live cd. I copied the debian-backports file from /usr/share/live-helper/examples/source to config/chroot_sources(as debian-backports.chroot and debian-backports.binary) and fixed the first problem (had to change "etch" to "lenny" in the files.)
View 3 Replies View RelatedI want to use the .debs from testing and experimental on Ubuntu 10.4. I added the repository info from debian sources but it doesn't show up as an upgrade. I know about downloading from OO.org but I want the new versions of go.org that debian has.
View 2 Replies View RelatedI would like to create some packages for programs that use the Git software to manage the source, I want to do this directly using the source code in the Git repo as the source code form the package. Does anyone have any hints or directions on how to do this? I been looking round the web for information about this, but all I seem to find is for about storing and build Debian packages from git, this is not what I want to do as these packages are for personal use and I have no need for this.
View 3 Replies View RelatedIs it possible to check out the log as well when you are checking out a version from some repo. For instance this is a game I like :-
[Code]...
The game is called dawn-rpg and one can find about it at dawn-rpg.sourceforge.net but that's not what I want to talk about. The thing it would be so much more convenient for me if instead of going to the svn mirror or whatever it is and checking out the log, it was local. I know I could do something like this :-
svn log > svnlog150611.txt
This would download the log file and put the contents in some text file I have named as svnlog150611.txt . The problem with this way of doing things is that each time I have to check out I would have to create a new txt file with that date. If there was a way one could check out the log as well when checking out a new version/release it would be nice. Its also possible that this might be already be there and there might be another command to use locally that I am not aware about. In that case, would look forward to people to share the same.
I have created some little .deb packages which are running fine within my local box. Now I like to create a personal repo for testing branch to distribute those .deb. I have a hosting space based on cetos server where I have both ftp as well as ssh access and I can create a subdomain there pointing to a folder which I can define. So based on this scenario what might be the best way for me to create a debian signed repo ? I have found
- dpkg-scanpackages
- reprepro
Which can create such repo for testing branch; as main non-free contrib style.
I follow the tutorial at [URL] to setup git over http, and create ssl self-signed cert through [URL]. (The command executed above is exactly the same as described in url, with only change to the name required.) However, while executing `git push upload master', command line prompt throws:
error: Config with no key for remote upload-url
fatal: bad config file line 9 in config
What might be the root cause?
I want to download an application called deluge, browsing in the website I found that this app is in the experimental repo, and they write the url:
Code:
Packages are in the experimental repo: [URL]So, I went to edit my source.list and I added the next line:
Code:
[URL]
I have a local repository, and declare also a remote one, I want to tell to apt-get to install a package from a local repo, if it exists. it seems that it begins from the remote. here is my sources:
deb file:/home/CD1 squeeze main
deb file:/home/extra6 /
deb http://ftp.fr.debian.org/debian squeeze main non-free contrib
I dont have a internet connection and I want to install VLC. I want to create a local repo for a vlc by downloading all the required packages. I tried to do by downloading all the packages from from VLC repo and create a local repo but failed. Its say this dependency failed and that dependency failed. i tried to manually install each and every dependency but still the problem exists.
View 2 Replies View RelatedI am new to Linux, how to install codecs, as when I am trying to install I am finding this error. An error occurred while initializing the software repository.
Details: Url scheme is a required component and sometime like repository can be loaded.