General :: Svn: Berkeley DB Error While Creating Environment For Filesystem Repo/db: Invalid Argument
Apr 14, 2009
I'm having trouble getting subversion working on Centos 4.7. When I try to create a repository using:
svnadmin create /path/to/repo
svn: Berkeley DB error while creating environment for filesystem repo/db: Invalid argument
svn: bdb: Berkeley DB library configured to support only DB_PRIVATE environments
I've searched the Net, with little luck. Threads seem to suggest that Centos has this flag compiled into the Berkeley DB RPM by default; whereas SVN doesn't want it. Someone, somewhere, must have got this to work and I'm sure it's something really simple I'm doing wrong.
WARNING! ======== This will overwrite data on /dev/sdb2 irrevocably.
Are you sure? (Type uppercase yes): yes # Unlocking memory. Command failed with code 22: Invalid argument
I had /var/log/messages open in tail on another terminal, but no message appeared. I tried the same command deleting one by one the parameters, but I got the same behaviour, so I don't think it is a parameter problem.
I loaded Avast anti virus into Ubuntu 10.10 this morning. It seemed to go okay and uploaded the updates. But then it stopped. Now when I try to start it I get the following error message. 'An error occurred in avast! engine: Invalid argument'
I am running Red Hat with 2.6.18-194.8.1.el5PAE kernel version. I am trying to run encryptfs to encrypt a partition on my hard drive. One of the kernel modules necessary is the md5.ko. I noticed it wasn't loaded in when doing an lsmod. I tried running modprobe md5 and it fails to load:
i downloaded baldurs gate II shadows of amn iso's, because i lost one of the CD's to the box, but anyways, I went to mount the third .ISO for installation, and BAM! my computer froze, so i waited five minutes, came back, and still frozen. shut it down for 20 minutes, pulled it back up, and it's got this error as follows; "Mount: mounting /dev/disk/by-uuid/65b0a6a-a366-435a-a086-58428cfe2bd1 on /root Failed: invalid argument
I've just moved a server across to CentOS 5.5 64-bit and I have been trying to get some custom software running on it. However I'm getting an unusual error during run time: sched_setaffinity: Invalid argument I've had this software working on a old versions of Gentoo (2.6.12-gentoo-r6) and Fedora. And the latest version of Ubuntu server 10.04.1. (All 64 bit). It looks remarkable similar to: Core test failed on s390x RHEL6 If v7 bug fix and enhancement update has been incorporated into CentOS 5.5 64 bit yet? Or how I might find out.
I'm running ubuntu 9.04 and trying to pull over some files via the GUI from a XP box over locally. I'm getting this error:"error while copying file into /volcano/tunes invalid argument" (under show more details)If I just copy over a mp3 file it works fine but the when I copy the entire directory I get this error.
I have an old PC with two hard drives (40 and 60Gb) and it uses dual IGhz pIII processors. It shares screen,mouse and keyboard with another PC.Both into Netgear modem. It ran ubuntu 8.04 and XP Pro on the drives above with no problems. Then I decided to try Mint 11 (34bit CD) - result after Grub blank screen other than flashing cursor at top left.No input from keyboard. Tried Mint KDE 10 (34bit DVD) same result. Tried Kubuntu 10 (CD) same result. Reinstalled Ubuntu 8.04 no problem. Upgraded via download from 8.04 to 10LTS hoping that this would somehow prevent the problem and have screen which says:-
starting up  ACPI no DMI BIOS year,ACPI =force is required to enable acpi mount: mounting none on /dev failed: No such device udevd: error getting socket: Invalid argument error initialising netlink socket udevd error initialising netlink socket libudev: udev_monitor_new_from_netlink:error getting socket:Invalid argument Segmentation fault Gave up waiting for root device.Common problems: Boot args (cat/proc/cmmdline) Check root delay (Did the system wait long enough) Check root (did the sytem wait for the right device) Missing modules (cat/proc/modules; 1s /dev) ALERT! dev/disc/by-uuid/"long number here" does not exist.Dropping to a shell.
Then it goes into Busybox and ends with "initramfs". I have tried altering the boot device in BIOS from HDD0 through 3 with the same result other than more bad language!
I am trying to do some bandwidth management testing, so I have developed a small script for doing so. When I try to run it it gives the error <error> RTNETLINK answers: invalid argument</error>. I have searched the net, and so far they say it has to do something with the kernel support.
the script: <code> tc qdisc add dev eth1 root handle 1: htb tc class add dev eth1 parent 1: classid 1:1 htb rate 2mbit ceil 2mbit tc class add dev eth1 parent 1:1 classid 1:10 htb rate 600kbit ceil 2mbit prio 2 tc class add dev eth1 parent 1:1 classid 1:20 htb rate 1400kbit ceil 2mbit tc class add dev eth1 parent 1:20 classid 20:100 htb rate 700kbit ceil 2mbit prio 0 #when running this command it gives the error tc class add dev eth1 parent 1:20 classid 20:200 htb rate 700kbit ceil 2mbit pro 1 </code>
I am running this script on a virtual machine that has ubuntu 9.04 installed.
I am compiling the code has hash_map getting following error
Code: typedef std::hash_map<uint32_t, CTM_ContextData> contexts_map_t; Compilation Error: /vobs/ims_hss1/ctm/inc/CTM_DidMemContextManager.h:77: error: ISO C++ forbids declaration of 'hash_map' with no type /vobs/ims_hss1/ctm/inc/CTM_DidMemContextManager.h:77: error: typedef name may not be a nested-name-specifier /vobs/ims_hss1/ctm/inc/CTM_DidMemContextManager.h:77: error: expected ';' before '<' token /vobs/ims_hss1/ctm/inc/CTM_DidMemContextManager.h:78: error: 'contexts_map_t' was not declared in this scope /vobs/ims_hss1/ctm/inc/CTM_DidMemContextManager.h:78: error: template argument 1 is invalid /vobs/ims_hss1/ctm/inc/CTM_DidMemContextManager.h:78: error: template argument 2 is invalid /vobs/ims_hss1/ctm/inc/CTM_DidMemContextManager.h:85: error: 'contexts_map_t' does not name a type
I want to get my PS3 Eyetoy working as a webcam on my Ubuntu box for use with Skype etc. When plugged in, the camera portion works fine and is recognised immediately. However, I am unable to get the microphone working. It appears to be recognised, but there isn't anything captured from it.
I have removed PulseAudio as it was interfering with my quest to get 5.1 working over HDMI passthrough in XBMC.
I did have it working briefly, but I must have changed something, and now I cannot get it to work for love, nor money!
This is what my system finds:
Code: $ arecord -l **** List of CAPTURE Hardware Devices **** card 1: CameraB409241 [USB Camera-B4.09.24.1], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 I have tried alsamixer -c 1, but that gives me the following error:
I'm having some difficulities with truecrypt and cannot figure out what's wrong since this is my first attempt to create hidden encrypted partition. I'm using ubuntu 9.10 64b with latest 6.3a truecrypt. After using truecrypt gui (just command truecrypt) I've tried: create volume-->create volumne within a partition/drive-->hidden trucrypt volume --> select some /dev/sdX by my choice --> select aes & sha512 --> password --> and format it.
when formating finished message "wrong ss, swith or wrong superblock of /dev/loop0" appeared. I've got no idea what could I do with it neither know whats program trying to do! Ok formating's done, then if you're trying to mount that partition then I would expect prompt for password, but that did not happen ...
EDIT: sudo mount /dev/loop0 /media/tmp/ also complaint about wrong superblock, but that does not ring any bell since i've got no idea what /dev/loop0 is or is for...
I'm trying to mount my new Western Digital Elements 2tb hard drive, but every time I try to plug it into the computer I get this error message:
Error mounting: mount exited with exit code 12: Failed to read last sector (3907027119): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS),
But when I tried opening the hard drive from nautilus I still got the same error message as above (no other volumes was connected at the time). I've also tried opening and watching it in GParted, and I can see it there as a volume that's not allocated. When I tried to allocate the hard it I got the message that it had no partition table. And that I cold make one. I tried and Ubuntu suggested to make a MS-DOS partition table for it. But there I got a little scared as I've not done this before. The external hard drive is brand new and was brought today. And I don't have the possibility to test it with Windows or Mac as I'm using Linux only on my machines.
I updated my system from FC13 18.104.22.168-66 to 22.214.171.124-68 for both the kernel and the kmod-wl RPM's. After doing so, iwconfig wlan0 key 1234567890 no longer works. I get an error indicating 'invalid argument'. If I reboot using the previous kernel/wl.ko module, it works The size of the wl.ko module increased in size by almost 30%. Did I somehow get the wrong RPM?
I'm running Kubuntu Karmic on my Dell Inspiron laptop - about 200 bug fixes behind because my only available internet is a cellular connection on a crappy wi-fi router - and last night, I suspended it, but it shut down instead. Not a problem, it does this fairly often, figure the RAM gets jostled or something.
But when I go to boot it up, it gets stuck at the pre-loading screen before getting garbled and dropping to the shell, where it says "mount: mounting /dev/disk/by-uuid/[insert hex code here] failed: invalid argument". Of course, mounting /root/sys, /root/dev and /root/proc fails, (directory does not exist) and it gives me the busybox initramfs prompt.
after upgrading ClamAV to version 0.97.1 and run the command Code: clamscan -r -i / --exclude-dir=^/sys --exclude-dir=^/dev --exclude-dir=^/proc | mail -s "clamav scan report XYSERVER" email@example.com the following errors appeared:
I've a problem when I try to run arpd program to support my honeyd software but when I try to execute it then it shows this error message ./arpd 10.0.0.0/8 arpd: intf_get: Invalid argument My arpd installation based on this tutorial [URL].
When i type 'ifconfig eth0 192.168.25.1 255.255.255.0' the outcome is 'SIOCSIFADDR : invalid argument', but when i check the ip address using /sbin/ifconfig i see the ip address is updated to 192.168.25.1 and is up. When i restart the linux box,the /sbin/ifconfig is reset to 192.168.100.1 .what should i do so that the linux box /sbin/ifconfig should not change when am rebooting.
iam having a problem while using the urlwatch utility in linux
/usr/bin/urlwatch --urls=/home/etika/Desktop/etikaa.txt file pathname is /home/etika/Desktop/etikaa.txt
when ownership is tomcat it doesnot run when ownership is etika(which is the user on the system through which iam running my script why the file which is passed to urlwatch is not accepted if that's file owner is tomcat6 it gives the following error
Traceback (most recent call last):
File "/usr/bin/urlwatch", line 221, in <module> for job in handler.parse_urls_txt(urls_txt): File "/usr/share/urlwatch/urlwatch/handler.py", line 128, in parse_urls_txt shelljob_errors.append('%s not owned by %s' % (urls_txt, os.getlogin())) OSError: [Errno 22] Invalid argument
but when the ownership of the file is changed to etika it run smoothly why urlwatch does not run when the file containing the urls is owned by tomcat with full 777 permission but run with etika (user on the system) through this iam running my shell script
I m unable to bring my wireless lan UP and getting the following error: SET failed on device wlan0 ; Invalid argument in dmesg i m getting : link not ready wlan0 Network card is : Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
I am actually making a packet sniffer using raw socket. Its just that when I use the command ' if((ioctl(rawsock, SIOCGIFINDEX, &ifr)) == -1) to get the interface index... Its gives me an error saying :invalid argument?
When I boot, after startup and before I log on, an error icon appears. I click - it shows a summary of the material that normally rolls by on a unix startup. One item is checked. It says:
Code: Enabling /etc/fstab swaps: swapon: /dev/mapping/vg_knox-lv_swap: read swap header failed: invalid argument I have 1 disk - it has 2 partitions - one an 83 type with a file system in it, holds the kernel, mounts at /boot.
The second partition is an 8e type contains a volume group logically split between lv_root and lv_swap and physically located on sda2. As I understand it, the system is having trouble processing the commands for lv_swap. I am tempted to mess with these commands, but don't have enough know how to do so and am short on the time required to learn enough to master this subject.
I am using an embed linux application and trying to mount a USB device. The USB worked fine in windows. I then put it on my Linux box formatted (I hope correctly) And then tried to do the following to mount it
Disk /dev/sda: 4040 MB, 4040748544 bytes 255 heads, 63 sectors/track, 491 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes