General :: Restoring Yum Repo In Fedora 7?

Feb 22, 2011

I mistakenly deleted the repo directory in the yum folder. Now my yum command does not work.i tried to rpmfusion but i couldnt find the rpm for fedora 7. How can i restore my repos. I didnt do any modifications. Only rpmfusion repo would do.

View 5 Replies


ADVERTISEMENT

Fedora Installation :: Updates After Install And Repo Lists / Saying Repo Not Found?

Mar 26, 2011

i'm attempting to know and understand fedora more and i will spend probably the next month pouring through all the forums and documents to answer more of my own questions. but there's quite a bit here, so i'd thought i'd ask some noob questions to get me started a little.

ive installed fedora 14 64bit and chosen only kde as the desktop. i selected an extra 2 repos besides the default, fedora 14 -x86_64 and fedora 14-x86_64 -updates. i believe this kernel is installed: 2.6.35.11-83

1. i can only see the 2 extra repo's as being "checked" in kpackagekit, shouldn't i see the default repo also ?

2. i dont have an applet in the system tray indicating the system is up to date, does fedora have this by default ? also after a clean install i ran yum check-update and yum update but the message sayes: "no packages marked for update". i'm not sure if the system is auto-updated during install or not, but with other distros iv tried there is always atleast a few updates needing to be done after install.

3. is kpackagekit the fedora gui package manager ? i dont see any others.

4. i want to upgrade to nvidia drivers, but i think i am missing a non-free repo or something. when i enter: yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64 i get messages stating "no package" i get the same message with yum install nvidia-settings.i also tried this: LANG=C yum --enablerepo=rpmfusion-nonfree info akmod-nvidia but it sayes repo not found.

View 4 Replies View Related

Fedora :: Software From Updates-testing Repo / Grabbed From Testing Repo When Run Regular Updates?

Jun 22, 2010

I am using Fedora 13 and I have one program (wine) that I need to start grabbing for the updates-testing repo instead of the default repositories in order to get newer versions. I think I can figure out how to add that repository, but I need to know if there are any others I need to disable or any other changes I need to make to my system so that I don't confuse my set up with conflicting updates.

Also, is there anything special I need to do to be sure that only that one program is grabbed from the testing repo when I run regular updates?

View 6 Replies View Related

OpenSUSE :: KDE 4.4 And Updates Repo / Add The KDE Factory Repo To Get Update?

Apr 5, 2010

Will KDE4.4 eventually move into the 11.2 updates or do I have to add the KDE Factory repo to get this update?

View 3 Replies View Related

Fedora :: Restoring Recycle Bin Icon?

Jun 15, 2010

I'm really into desktop customization so today while i was changing a couple of things here, i did the stupidity of changing the recycle bin icon (right click on the icon> properties> basic tab). I obviously regreted it and now i'm trying desperatly to restore it to the default icon. I'm not a total noob when it comes to customization

View 2 Replies View Related

Fedora :: Failing HD And Restore Not Restoring

Dec 20, 2010

The HD containing my main F14 install is suddenly failing with many unreadable blocks. So I booted a different F14 installation I have on another disk.

Then I run dump, for example, as following:

Code:
dump -0 -a -q -v -A sdb1_home.arc -f sdb1_home.dmp -L F14_sdb1_home /dev/sdb1

as, for what I can recall, I've often done to create full backups.

The problem is that running restore with this command:

Code:
restore -i -A sdb1_home.arc -f sdb1_home.dmp

(as, for whatI can...) and using the add and extract commands, only the directory are created. But files are listed using ls. If I add just a file, only dirname is extracted.

View 9 Replies View Related

OpenSUSE :: 'repo-non-oss': Failed To Cache Repo (139)

Oct 4, 2010

YaST-->Software-->Online Update Getting error: There was an error in the repository initialization. 'repo-non-oss': Failed to cache repo (139). History: - repo2solv.sh "/var/cache/zypp/raw/repo-non-oss" > "/var/cache/zypp/solv/repo-non-oss/solv"

Output of zypper lr:

# | Alias | Name | Enabled | Refresh
--+-----------------------+-----------------------+---------+--------
1 | openSUSE-11.0-Updates | openSUSE-11.0-Updates | Yes | Yes
2 | openSUSE-DVD 11.0 | openSUSE-DVD 11.0 | Yes | No

[code]....

If I disable the repo-non-oss repository the update works fine. The URL I have for the repo-non-oss repository is:

Index of /distribution/11.0/repo/non-oss

This has been going on for over a week. Do I need to use a different URL for the non-oss repository? I live in New York, United States.

View 4 Replies View Related

General :: Restoring The Particular Directory From Tar?

Jun 18, 2010

I have performed the tar backup in my linuxbox by using the commandtar -cvpzf ring.tar.gz /m01/fordb/sqlThe ring.tar.gz is stored in /m01Now i need to restore the particular directory sql into the /m01/fordb/where i have deleted the sql directory

View 3 Replies View Related

General :: Restoring /usr/bin/php File?

Sep 13, 2010

I've accidentally changed /usr/bin/php file on my server by running a cp command. I know this is bad, i just don't know how bad. Everything is working fine (websites using php), so i just wanted to know what this action could cause and also how can i restore original content

View 14 Replies View Related

Fedora :: Restoring Deleted Files On Ext4?

Jul 20, 2009

I have recently been helping my brother set up his computer with a fresh install of Fedora 11. Unfortunately things have not been going all that well. After having some problems with Fedora 11, such as it not liking his monitor and disabling Plymouth's graphical boot (I actually like to see what my systems doing!) things finally seemed to be going into place. Unfortunately the next day we were no longer able to log into his account. After hours of tweaking I finally found out it was that for some reason GNOME stopped liking his account.

This is where things went from bad to worse. I tired removing his own account and giving him a new one, unwittingly taking out his home directory in the process, all 80 gigabytes of it. And just as promised ext4 was extremely quick about it. What can I do to recover it? We have done similar things on NTFS on Windows XP, so I see no reason why a next-gen file-system like ext4 can't do it.

View 7 Replies View Related

Fedora :: Restoring Grub After Reinstalling Windows?

Aug 4, 2010

My Windows installation had a problem and I had to reinstall Windows. The problem now is that I need to get grub back so that I can boot into Fedora. I'm using a Fedora 11 LiveCD I had sitting around. Here are the results of the command most of the way down the first page:

Quote:

Disk /dev/sda: 250.0 GB, 250059350016 bytes
240 heads, 63 sectors/track, 32301 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
Disk identifier: 0x000f09ab

[Code].....

I'm tempted to try the grub-install command quoted near the end of the thread, but I don't want to do anything that will hose the system.

View 14 Replies View Related

Fedora :: Restoring The Original Video Driver?

Aug 29, 2011

Code:
direct rendering: Yes
server glx vendor string: ATI
server glx version string: 1.4
server glx extensions:
client glx vendor string: ATI
client glx version string: 1.4

[Code]...

write me a 100% working step-by-step guide to remove all Ati VGA driver and restore the original "mesa" and other things? It's good too if i can just switch back. I have ugly glitches, slowdowns etc. since i installed the driver with fedora "easy life". I know there are many threads about this but i didn't find a clear working explanation.

View 2 Replies View Related

General :: Error At Restoring Dumped Sql

Aug 17, 2010

error at restoring dumped sql

I have backuped sql by mysqldump on mysql version 5.1.41. But when I restore this sql by command "mysql -uroot --default-character-set=utf8" my-db < my-sql.sql" I've got this error message.

Quote:

#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'barunarum',1,1,1,1,1,1,1,1,1,1,3,3,-1,5,1,-20,0,'','script|iframe',0,0,0,0,0,0,0' at line 1

View 4 Replies View Related

General :: Restoring A Backup In A Different System?

Jan 21, 2010

im trying to clone my ubuntu system installed in a laptop in case the laptop crashes.

But, first of all: when i try to restore the system in a new PC, could be incompatibilities because the hardware of the broken laptop and the new laptop is different?

I dont mind if i have to buy another laptop with the same processor type (i386, etc), but, for example, the type of the RAM could be cause of problems?

View 7 Replies View Related

General :: Restoring RH4 Using AMANDA - Will It Restore OS

Jun 4, 2010

If I want to restore an full backup of AMANDA, will it restore the OS along with the files or does it just restore all the files in /

View 2 Replies View Related

General :: Restoring System Back?

Feb 16, 2010

can i do a complete system restore on a toshiba netbook with linux op system, as ive bought one with admin name and password still on it, and i dont know the password to use the admin side of the netbook?

View 10 Replies View Related

General :: Restoring Tape Contents?

Oct 14, 2010

on a Linux pc I want to restore the contents of the DLT tape to /mnt directory,how to do itIf I just want to see the contents of the files, is it possible to read the contents irectly from tape without restoring to hard disk?

View 4 Replies View Related

General :: Restoring RedHat Enterprise Server X64 5.4?

Jul 11, 2011

at work place I have an HP ProLiant DL580 with RedHat Enterprise Server 5.4 x64. Today I cloned this machine using clonezilla. What I would like to do is restore the image to VMWare machine for personal purpose (I cannot perform tests on production machine). But after restoring on VMWare I got "Kernel Panic". That's normal due to different hardware.

Now, is there a way to remove the Kernel Panic and correctly boot the machine? I ask our tech department for the RedHat CD1 to enter the "linux rescue" enviromnent, then try to re-read the hardware list with

# chroot /mnt/sysimage
# kudzu

View 3 Replies View Related

General :: Restoring The Dumped Database In Mysql?

Oct 14, 2010

in my fedora machine i gave

mysqldump <database-name> > bakup.sql
in my solaris machine i gave
mysql <newly created dbname> < bakup.sql
it shows the below error

ERROR 1064 at line 25: You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near 'DEFAULT CHARSET=latin1' at line 7

mysql version in my fedora machine is
mysql Ver 14.14 Distrib 5.1.47
mysql version in my solaris machine is
mysql Ver 12.22 Distrib 4.0.24

View 4 Replies View Related

General :: Restoring A HDD Backup Image From The Ubuntu Live CD?

Feb 3, 2010

I want to restore a HDD image I have to my laptop's HDD while booted off the Ubuntu Live CD.The laptop's HDD is unformatted and has no partitions.I expected this to work:$ sudo dd if=/path/to/backup.img of=/dev/sdaBut I'm tolddd: opening `/dev/sda': Permission denied.

View 1 Replies View Related

General :: Restoring The Owners On Debian System Files?

Mar 20, 2010

Due to my inattention, tiredness (and probably stupidity) i've run "chown -R someuser:someuser /" and now all your base are belongs to us the files on the server belong to one user (lol).After system restart, apache, bind9, mysql, and adozen other applications don't start and fill their log files with permission errors.I haven't done any backups on system files, only on the db and website files.Please suggest some ways to revive my web server. I have only 2 month experience with linux,

View 1 Replies View Related

General :: Windows 7 - Bootmgr Missing After Restoring With Sysresccd

Jun 30, 2010

I backed up my laptop months ago. Today i repartition the drive and used sysresccd with partimage to restore the HDD. I got a success msg after restoring however when booting i get a bootmgr missing error. How do i fix this?

View 2 Replies View Related

General :: Restoring Partition Table - 'Testdisk' Not Working?

Jan 27, 2010

I was having trouble creating a USB Startup Disk in Ubuntu and used the command:

sudo dd if=/dev/zero of=/dev/sdb bs=1M count=1

This was a mistake as my USB flash drive was on /dev/sdc. If I am understanding this correctly, the command above deleted the MBR and the partition table. This disk had a single "/storage" partition on it. I googled a solution and found that the "testdisk" program seems to be the most popular solution for things like this. I ran it, selected an "Intel/PC partition" type, set the partition to a non-bootable primary Linux partition, wrote it, and rebooted.

Whenever I run:

sudo mount -t ext3 /dev/sdb1 /storage

I get:

mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so

Dmesg shows the following:

[20246.273941] EXT3-fs error (device sdb1): ext3_check_descriptors: Block bitmap for group 1 not in group (block 0)!
[20246.279376] EXT3-fs: group descriptors corrupted!

When I run:

sudo fdisk -l /dev/sdb

I get:

Disk /dev/sdb: 400.1 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

[code]....

View 4 Replies View Related

General :: Openbox - Autostart.sh File Is Not Restoring Things

Jun 13, 2010

I've decided to give openbox a try with Debian testing. I set up my right-click menu exactly how I want it, and everything else is set up perfectly. I installed trayer and tint2, along with nitrogen. I added the following lines to my ~/.config/openbox/autostart.sh file, but things aren't loading/restoring as they should. Tint2 and trayer don't load at all, and nitrogen isn't restoring my wallpaper. All I get is a black screen with my cursor, but the ability to right-click and open the menu, so it's not like X is dead. I did set the default wallpaper by issuing the command nitrogen /home/john/Pictures/Wallpapers, where "Wallpapers" contains all of my background images.

Here is my autostart.sh file: Code: # Autostart file for openbox nitrogen --restore & sleep 2s && tint -c /home/john/.config/tint/.tintrc) & (sleep 2s && trayer --expand true --transparent true --alpha 255 --edge bottom --align right --expand true --SetDockType true --widthtype request --margin 130) & I do have proper content in the .tintrc file located in /home/john/.config/tint/tintrc. Am I doing something wrong here?

View 4 Replies View Related

General :: Restoring A Clonezilla Image To Larger Partition?

Jan 2, 2010

I'm trying to restore an image from a 40gb partition(6gb used) to a 100gb partition. I set everything up in gparted and and restored the partition image with clonezilla. In gparted, the partition shows the full 100gb partition with 6gb used, however when I boot windows and open the properties on the C: partition, it shows that it's only 40gb. Is there some setting to restore the partition image and use the full 100gb?

View 7 Replies View Related

OpenSUSE :: Removing A Repo - Error "can't Find The Data For The 'problem' Repo"

Nov 20, 2010

I wasn't paying proper attention when adding a repo to yast and need to find the file were the info is saved to delete this. The problem is that whenever i use yast it comes up with an error code saying that it can't find the data for the 'problem' repo. Have tried zypper rm but that comes up with a similar error advising that the data is in a format that was not expected. My thinking is to track the file were the yast repo source details are saved, delete this and then just add the repos that i use back.

View 6 Replies View Related

Fedora :: K3b From Kde Repo?

Mar 18, 2010

I've always used the latest k3b from the kde repo, however it's no longer in the x86_64 repo, anyone know where else I can get it from?

View 4 Replies View Related

Fedora :: Kde 4.3.3 Available In KDE Testing Repo?

Nov 23, 2009

did some one installed kde 4.3.3 by using the kde testing repo?

View 3 Replies View Related

Fedora :: Add 32 Bit Repo To 64 Install?

Sep 3, 2010

I know I have seen instructions for this before but I can't find them searching.I have a fresh install of Fedora 13x86_64 and need to temporarily enable 32 bit testing repositories so I can grab 32 bit Wine and Firefox (need flash to work in FF). Can someone please tell me how to add these?

View 2 Replies View Related

Fedora :: Adding A Repo To Yum?

Oct 13, 2010

i want to add http://carme.pld-linux.org/~arekm/RPMS/ to yum repos for searching packages and installing them.(as ATrpm and dag ,...)

i do this :
#sajad added this:
[carme.pld-linux.org]
name=For VirtualBox
baseurl=http://carme.pld-linux.org/~arekm/RPMS/

[Code]...

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved