General :: Windows XP Setup Doesn't Recognize Netbook's Harddrive?
Mar 4, 2010
Before Christmas, I wiped all partitions off my Acer Aspire One D150 netbook and installed Jolicloud Linux to try out. It's great, but I'm missing too much of my Windows-only software so I'd like to switch back.The problem I'm having is that the Windows XP Home setup CD is starting up the installer fine, but when it comes to selecting the harddrive to install on it's not finding anything.I've tried using GParted to wipe all partitions again and create a new FAT32 partition, but that's not being picked up by Windows XP setup either. (I've tried setting the 'boot' flag on this partition in GParted as well, but no change.)Is FAT32 not the correct paritition type for Windows XP Home? I'm thinking this isn't relevant at this point, because Windows XP setup doesn't seem to be mounting the HDD, nevermind analysing what partitions it has on it already.
View 3 Replies
ADVERTISEMENT
Apr 23, 2011
I have a hp pc that has a hard drive of 750 gb and a recovery hard drive of 31gb. I installed linux side by side with windows 7 for dual booting. Now I can't boot windows 7 anymore. During the installation of linux, I chose the advanced option so as to manually partition the drives for linux. On the available list of drives, I chose the 750gb and clicked on modify. I chose 150gb for the root "/" (on ext4) and 700mb for swap out of the 750gb and clicked install. After finishing the installation I restarted the pc and sought to test linux. The linux works fine but when i tried to start windows, I have a boot error. My pc doesn't seem to recognize windows anymore. It takes me straight to the HP recovery tool. I don't understand why. So I logged into ubuntu and check the disk utility and I discovered that I have a whooping 600gb unallocated space. It's like my whole windows is gone. This is what Disk Utilty shows
150gb ext4 | Free 600gb | RECOVERY 31GB NTFS | HP_TOOLS 108MB FAT
What can I do to recover my windows back?
View 3 Replies
View Related
May 29, 2011
I have a Samsung SGH-D900 with its USB cable, and tried to connect to my Netbook - Ubuntu 10.04 to download photos, but the Netbook doesn't recognize the Cell Phone. Is there a Linux Driver for Samsung SGH-D900?
View 3 Replies
View Related
Sep 1, 2011
I installed windows 7 after I installed linux. I got grub reinstalled but windows doesnt show up in the grup menu. So I run in linux sudo update-grub, but this doesnt find my windows system.
Here's my fdisk -l
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 8511 68358144 83 Linux
/dev/sda2 8511 8572 487425 5 Extended
[code]....
View 8 Replies
View Related
Aug 4, 2011
I've had a problem for a while-- when I save files on a USB stick in Ubuntu, then put it in a windows computer, it doesn't recognize the files. It only recognizes a video file that I have, but not the .doc files. The folders either don't appear or only appear as shortcuts.
View 9 Replies
View Related
Sep 20, 2010
I have Ubuntu 10.04 in my laptop and at the same time I have Windows 7 (partitioned disk). I use mostly Ubuntu, but I need windows for some stuff. I want to share files of windows with Ubuntu (is weird but when I installed Ubuntu never gave me the option "share files from windows", I dunno why). Anyway, I can see the disk in Ubuntu, and I can see the folder /Documents and settings/, that creates windows by default with my files. However, the route is too long to arrive there from Ubuntu using the Terminal.
I created a shadow link using lndir to arrive to my files easier. It works fine, however, sometimes when I go to the files using this route, these are lightened in red, and when I try to enter to one of these folders, the system doesn't recognize it. After a while, these are in blue and I can go in them. Why it is happening?. What I did Is the "correct" way to do it?.
View 2 Replies
View Related
Jun 3, 2010
When I create on windows a text file in Greek, It doesn't recognize it with Ubuntu... So I created a script:
Code:
#!/bin/bash
fileName="$@"
fileNoExt=$(basename "$fileName")
fileType=$(file "$fileNoExt")
[Code]....
View 1 Replies
View Related
Aug 18, 2010
I have a gateway laptop that I have attempted to dual boot, but the computer only sees the Ubuntu OS and the Vista Windows Recovery Partition. (Actually, gnome reports 3 separate Ubuntu OSs... part of the problem?)
When I type fdisk -l, I get the following message code...
View 5 Replies
View Related
Dec 23, 2010
I recently have installed Ubuntu 10.10 Maverick Netbook Edition in my personal netbook. The thing is that I had installed Windows 7 in the hard disk drive so I decided to install Ubuntu alongside with it. After the process of installation everything was cool but I hadn't the Grub working. I then pressed the Shift button during the booting process so I got the Grub menu but it didn't show the Windows 7 partition. The Windows installation was not erased because its file system is present in Nautilus. I have tried reinstalling the Grub a thousand times but nothing changes. I have attached the results of the boot info script so you can have some info about my booting configuration.
View 9 Replies
View Related
Feb 3, 2011
I have a VirtualBox 3.1.2 image of Debian 5.0.2 running on Windows XP SP3. I would like to export that Debian image to a USB harddrive such that I could boot to that drive and run it natively. Is that possible to do with a VDI?
View 1 Replies
View Related
Jan 29, 2010
how to get linux onto an old laptop (dell inspiron 2600, 1GHZ, 120MB RAM). the cd drive doesn't recognize CD's anymore and in boot menu, "Setup Utility" the usb drives aren't recognized. the usb drive or pen drive boots in another desktop just fine. i need to somehow install xubuntu or crunchbang or something lite but must do it using net install. i see lots of tutorials but they are either too complicated or unknown source, like "inslux." and not too complicated of a process. I'm a "techie-tard," i guess. also, i'd like to suggest a new "sub-forum" in "distribution" forum, Called "General Distro."
View 9 Replies
View Related
Jun 27, 2011
In getting my Fedora 15 installation up and running (which it mostly is, now, thanks to help from LQ!) I am at the point of installing thunderbird so that I can send/receive email. It seems to install fine, but when setting up the account it says that my username/password is not recognized. I know that I am typing them in right, and if I go directly to gmail with firefox rather than through thunderbird they work OK. Any thoughts? (I am also posting to the thunderbird forum at mozilla.)
View 6 Replies
View Related
Apr 9, 2010
I am trying to set up a SunBlade 150 with 512MB RAM, ATI Video, 80GB Harddrive on Lenny.
My Goals:
1. Have Web Server
2. Have Mail Server
3. Be able to connect to Lenny from Windows 7 for file sharing
4. Be able to ADMINSTER Lenny from Windows using Exceed in a GUI environment.
Can someone please give me a step-by-step that I might be able to follow. I have already tried to install Lenny with the desktop stuff and the system locks up. I have reinstalled this thing about 6 times and am about to give up and reload Solaris on this stupid machine and try to figure it out.
View 1 Replies
View Related
Feb 27, 2011
I have a problem with my Grundig's (model GNB-250D) laptop wireless card. I recently installed Ubuntu 10.10 and tried to use a wireless connection to browse the internet but it didn't detect any, it seemed strange as it worked perfectly on Windows. I can browse the internet fine if I use an Ehternet cable.
View 4 Replies
View Related
Feb 4, 2010
I am trying to create a usb bootable UNR but instructions say to use imagewriter to create the usb drive. I downloaded thee .iso unr and imagewriter will not show it on the desktop or anywhere.
View 9 Replies
View Related
May 18, 2011
I am relatively new with PC configuration and Linux. The Windows 32 bit OS only recognize less the 4 Gb of RAM, their 64 bit OS goes to 8 Gb. Do the Linux OS have similar limits? I am using Ubuntu 10.04, but I am interested in a general Linux answer.
View 13 Replies
View Related
Aug 18, 2011
I am installing a program on a server as a non-root user. Specifically it is tmux 1.5, but this should apply broadly to all locally installed program in my opinion (I mention the program name in case this problem ends up not being my own error).
The program requires me to install some dependent libraries (e.g. libevent and ncurses). So, I installed them both locally since I do not have root access
cd $HOME/library/installation/folder
DIR=$HOME/local
./configure --prefix=$DIR
#... make ... make install
[Code]....
Ok, so this installs the program without problems into $HOME/local/bin, but if I run the executable: $HOME/local/bin/tmux , I get the following error:
tmux: error while loading shared libraries: libevent-2.0.so.5: cannot open shared object file: No such file or directory
It would seem to me that the program cannot find the desired libraries, but the file libevent-2.0.so.5 does indeed exist in $HOME/local/lib as specified in the configure options. I am wondering how I can get the program to recognize the installed library in order to run. I tried putting symbolic links in $HOME/lib, $HOME/bin, and $HOME/local/bin, but none of these worked.
View 2 Replies
View Related
Nov 5, 2010
Sometimes the linux install CD does not recognize the disk controller
I am asking is there a way to customize the disk and add such driver
if yes :
what files from the driver to put and where to do that?
View 1 Replies
View Related
Mar 17, 2010
i ahve to boot it from the command like an executable but i dont know how to exactly and when i thought i had it figured out i didnt know how to write the name of the file in the disk ubuntu just kept saying file or directory not found
View 14 Replies
View Related
Nov 17, 2010
I would like to know if I can install Super OS 10.10 or Meego on my Netbook? It has the memory and HDD space, and If I decide to. will it work with Windows XP Home also?
View 6 Replies
View Related
Mar 9, 2011
i've worked with Linux for a while now, but never in a double boot kind of way (except using wubi), and i'm still kind of a newby.i have 2 harddrivesfirst one has only 1 partition; Windows XPsecond one has 1 empty partition, simple storageand another partition where i installed fedora core, and GRUB is also located on this harddrive.I changed harddrive priority to my second harddrive, result:GRUB comes up, no problem, but when I try to boot windows, it tells mentldr is missing ctrl alt del to continueso i changed the harddisk priority back to the way it was, where the first drive containing windows is first priority... but then, no GRUB.i've tried editing the grub conf,i've tried fixboot/fixmbrtl;dr:no ntdlr when linux harddrive is main priorityno grub when windows harddrive is main priority
View 4 Replies
View Related
May 2, 2010
as the tags suggest, i'd like a fresh install of linux using grub2, and partition my harddrive
View 3 Replies
View Related
Jan 14, 2011
I just installed Ubuntu 10.10 64bit using Wubi. I had 32 bit installed in a Virtual machine on Windows but I wanted to install it to my harddrive (and wubi was easiest). I'm trying to install Cinelerra following the instructions at:http://cinelerra.org/docs/cinelerra_..._en.html#SEC13Once I get to:autoreconf -i --forceit gives a few errors. Here's a copy and paste from the terminal:Quote:
lee@ubuntu:~/hvirtual$ autoreconf -i --force
Can't exec "libtoolize": No such file or directory at /usr/bin/autoreconf line 196.
Use of uninitialized value in pattern match (m//) at /usr/bin/autoreconf line 196.
[code]....
View 9 Replies
View Related
May 1, 2011
I have 10.10 installed within my Windows Xp.All was fine.Then,I upgraded to 11.04.Boot screen etc is fine .Log in is automatic in Classic.Unity & Compiz not supported.Now,again everything is fine except that my xp partitions are not recognised and hence I can not mount them and access them.
View 5 Replies
View Related
Oct 28, 2010
my play on linux wont work i go to download a game and it just freezes then it asks me to force quit or wait is because of the computer im using a netbook nb305 toshiba with a intel atom processor with ubuntu netbook os?
View 14 Replies
View Related
Aug 30, 2010
Why i cant change from 800x480 to 1024x600, that this model of EEE pc doesnt support anything higher than 800x480 at the 10:1 ratio...
Firstly my question is, is it ACTUALLY possible to 'overclock' this type of netbook to run a higher res?
Im running ubtuntu netbook remix 10.04 and am new to linux (again, so sorry) so be nice, and ive tried getting my head around this 'sudo' stuff, and the xorg.conf file (which is nowhere to be found) and ive even tried a program calld astray but im pretty sure ive exhausted my patience as trying to self-teach . . .
And ive also tried to much around with xrandr or whatever that command was.. but i cant really get my head around it, and it kept telling me the resolution didnt exist ect...
View 1 Replies
View Related
Sep 8, 2010
I have an acer aspireone aod250, i putted an external cdrom and downloaded the ubuntu, tried to install it but it didn't recognize the hdd... i though it was the cd, i downloaded ubuntu netbook edition, it did the same. i thought maybe i could try another operative, i downloaded linux mint 9, did the same thing. then ordered a cd from ubuntu.com, got in today, and it doesn't recognize my hdd. btw, the hdd is a seagate momentus 5400.6 with 160gb. i already ran ubuntu with the cd rom and starts the instalation, but when it arrives to the partitioning part of the instalation, it doesn't detect my hdd. but the bios in the pc detects it.
View 9 Replies
View Related
Jan 13, 2011
I'm new to ubuntu. My kingston 4Gb pen drive doesn't recognize from ubuntu 10.04.
View 8 Replies
View Related
Aug 19, 2009
i have an Acer Aspire laptop, 4GB of ram, with Vista and Kubuntu installed (dual boot). When checking my computer properties in Windows, it does say that i have 4GB, but Kubuntu's system monitor says that i have only 2.9GB.
View 4 Replies
View Related
Nov 20, 2009
I am having a problem trying to get my UPS (APC BACK-UPS ES 750) to be recognized (via USB) on my new CentOS 5.4 system. I had no trouble a while ago getting it to work on an old Fedora Core 3 system, and I don't think the problem is even with the apcupsd package because at the very least, I expect to see the device appear when I plug in the usb cable and use (from the APCUPSD User Manual):
View 7 Replies
View Related
