General :: Thunderbird Doesn't Recognize Name / Password
Jun 27, 2011
In getting my Fedora 15 installation up and running (which it mostly is, now, thanks to help from LQ!) I am at the point of installing thunderbird so that I can send/receive email. It seems to install fine, but when setting up the account it says that my username/password is not recognized. I know that I am typing them in right, and if I go directly to gmail with firefox rather than through thunderbird they work OK. Any thoughts? (I am also posting to the thunderbird forum at mozilla.)
I migrated an old SuseLinux 10 box to Debian (Lenny) a couple months ago, and apparently no one noticed you can't change your password. Root can do it because passwd doesn't ask root for a password, but no one else can (although they can log in, passwd doesn't recognize their login password when they attempt to set a new password and it asks).I changed authentication to use blowfish when I setup the server (because the SuseLinux 10 system used it) and apparently the passwd command doesn't work with that. Apparently I need to update another configuration file or possibly get a different program to update the passwd file if I use blowfish. Any ideas?
The weird thing is that it can generate a blowfish hash to set a new password, but apparently can't generate one to authenticate the user.something changed recently and it is no longer generating a blowfish hash when setting a new password. It is generating a hash with only 13 characters. And I can clearly see that many users have changed their passwords.
I had the same problem with normal ubuntu, wubi or even after instaling it in a virtual pc
I've got a wireless router with a WEP security, when I choose my connection and put in the key it just tries for some time and then ask me again for the WEP key. And it goes like this on and on and on, I've tried to connect at some firends gome with the same kind of connection and it doesn't work either.
I think that in an older version I did connect to an unprotected connection but I cannot take out the protection because it is my roomsmate wifi.
This is a new installation.My system login password is recognized and that same passwd is recognized by the Software Centre, but not with sudo in the terminal.
just setup ubuntu server 10.10 on my new home server, installing usual stuff ect and came to install TCL, however had a couple of errors and done a bit of digging, come across a thread here that told me i needed to enable the 'repositories' packets in my packet manager, then went to open the packet manager and its doesn't recognize my password, although i can use sudo just fine.
Is there a way to make Mozilla Thunderbird not allow anyone to view my offline storage without my password and to make it so whatever data it does store on my computer is encrypted with my password? Or is there another client that will do this better? I don't like the idea that anyone could waltz into my office and read my old emails.
how to get linux onto an old laptop (dell inspiron 2600, 1GHZ, 120MB RAM). the cd drive doesn't recognize CD's anymore and in boot menu, "Setup Utility" the usb drives aren't recognized. the usb drive or pen drive boots in another desktop just fine. i need to somehow install xubuntu or crunchbang or something lite but must do it using net install. i see lots of tutorials but they are either too complicated or unknown source, like "inslux." and not too complicated of a process. I'm a "techie-tard," i guess. also, i'd like to suggest a new "sub-forum" in "distribution" forum, Called "General Distro."
Before Christmas, I wiped all partitions off my Acer Aspire One D150 netbook and installed Jolicloud Linux to try out. It's great, but I'm missing too much of my Windows-only software so I'd like to switch back.The problem I'm having is that the Windows XP Home setup CD is starting up the installer fine, but when it comes to selecting the harddrive to install on it's not finding anything.I've tried using GParted to wipe all partitions again and create a new FAT32 partition, but that's not being picked up by Windows XP setup either. (I've tried setting the 'boot' flag on this partition in GParted as well, but no change.)Is FAT32 not the correct paritition type for Windows XP Home? I'm thinking this isn't relevant at this point, because Windows XP setup doesn't seem to be mounting the HDD, nevermind analysing what partitions it has on it already.
I have a problem with my Grundig's (model GNB-250D) laptop wireless card. I recently installed Ubuntu 10.10 and tried to use a wireless connection to browse the internet but it didn't detect any, it seemed strange as it worked perfectly on Windows. I can browse the internet fine if I use an Ehternet cable.
I am installing a program on a server as a non-root user. Specifically it is tmux 1.5, but this should apply broadly to all locally installed program in my opinion (I mention the program name in case this problem ends up not being my own error).
The program requires me to install some dependent libraries (e.g. libevent and ncurses). So, I installed them both locally since I do not have root access
cd $HOME/library/installation/folder DIR=$HOME/local ./configure --prefix=$DIR #... make ... make install
[Code]....
Ok, so this installs the program without problems into $HOME/local/bin, but if I run the executable: $HOME/local/bin/tmux , I get the following error:
tmux: error while loading shared libraries: libevent-2.0.so.5: cannot open shared object file: No such file or directory
It would seem to me that the program cannot find the desired libraries, but the file libevent-2.0.so.5 does indeed exist in $HOME/local/lib as specified in the configure options. I am wondering how I can get the program to recognize the installed library in order to run. I tried putting symbolic links in $HOME/lib, $HOME/bin, and $HOME/local/bin, but none of these worked.
I've upgraded(?) to TB3.1 from the Mozilla repo and instead of a single panel for the password, I get at least 3. The record so far is 6! Going back to 3.0.5 returns to a single panel. I need to stick with 3.1 as a parallel upgrade to Lightning 1.0b2 means 1.0b1 will not work. How to get back to a single password entry?
Using thunderbird for email, as several users of this computer have individual preferences. Worked in 10.10 and previous. Upgraded to 11.04 this morning, had to install from CD due to my mistake. Changed computer name too. No worries, have done this before. Added new account to Thunderbird. Copied over mail folders too. Application is good to go. However, when checking email now get reply from server that password is invalid. Checked all account settings within T-Bird but cannot locate password setttings for this server/account. Appears to use something called STARTTLS. How to access this store of passwords?
I have a hp pc that has a hard drive of 750 gb and a recovery hard drive of 31gb. I installed linux side by side with windows 7 for dual booting. Now I can't boot windows 7 anymore. During the installation of linux, I chose the advanced option so as to manually partition the drives for linux. On the available list of drives, I chose the 750gb and clicked on modify. I chose 150gb for the root "/" (on ext4) and 700mb for swap out of the 750gb and clicked install. After finishing the installation I restarted the pc and sought to test linux. The linux works fine but when i tried to start windows, I have a boot error. My pc doesn't seem to recognize windows anymore. It takes me straight to the HP recovery tool. I don't understand why. So I logged into ubuntu and check the disk utility and I discovered that I have a whooping 600gb unallocated space. It's like my whole windows is gone. This is what Disk Utilty shows
I have just installed Fedora 11 64bit on a new hard disk, using Intel 975BX2 motherbord, 3Gbyte RAM, 320Gbyte hard disk etc., USB mouse and keyboard. The installation went fine, but when I enter the password for the boot (I assume GRUB was installed) it fails to recognise the password. Do this three times and the boot segment ??? fails to initialise.
I recall a linux magazine i buy indicating that you have to copy and paste the password manually after installation, but i cannot recall the article date. Is this a problem - the password protection for the GRUB boot loader does not work at installation time when using the graphical interface ?. I did not use any odd characters - basic letters and numbers.
While trying to download themes for fedora 12,I get to the end it ask for my PW (in sudo) then says it is incorrect.When in graphic inter phase all my passwords are excepted.I've been reading the linux manuel. but can't find the anwser.If I am to put anouther password in where do I do that and how.
I've just installed Linix 7.0 which I purchased several years back but never got around to installing it. I installed it on an older Compauge notebook . At the requested time I entered the user name and password in the setup program. But now when I try to log in , it does reconize any of the data I entered. Is there a way to reset it. I can't even get into the computer to delete the installation and re-install.
I want to ssh, scp, git fetch, etc. without a password. I saw the previous questions, and closed ones regarding this issue, but the suggestion seems to be to use ssh keys. However, after setting up ssh keys, I am still asked for my password (it's not asking for my private key password; it's asking for my login password). How am I supposed to set this up so that it only uses my private key for authentication?
I'm running Debian Wheezy and I don't know why, but whenI switch to console F1(Ctrl+Alt+f1) I can't enter login information. It's like Debian didn't have completely starting and wait always.The F1 console looks like this:
I am running Ubuntu 11.04 i386 and I installed the unity desktop by using sudo apt-get install ubuntu-desktop. However when I try to open the synaptic package manager it won't recognize my password. It just keeps asking me for the administrator password. I can open update manager which also needs the admin password. This is a fresh install all I have done is installed the ubuntu desktop. I am currently trying to install KDE desktop to see if it works on there. I also have had this problem on my laptop which runs 11.04 x64 desktop edition. Does anyone else have this problem or is it just me? and is there a fix? also what is the terminal command to launch the packet manager? edit. It started working on my laptop a week or so ago after I did updates. So I'm not sure if the server version of unity or the packet manager is just behind? I have run the update manager on my server and it says its uptodate.
I'm trying to install thunderbird, and I found the instructions. Open terminal window / Code: sudo aptitude update / I am then prompted for my password, but they keyboard will not register any keystrokes! [new paragraph] I love ubuntu and what it does for me security-wise. I love that it is opensource. I really do. But I have yet to install a single program on it, without extensive help from the help forums and a process taking days at the minimum.
I have an acer aspireone aod250, i putted an external cdrom and downloaded the ubuntu, tried to install it but it didn't recognize the hdd... i though it was the cd, i downloaded ubuntu netbook edition, it did the same. i thought maybe i could try another operative, i downloaded linux mint 9, did the same thing. then ordered a cd from ubuntu.com, got in today, and it doesn't recognize my hdd. btw, the hdd is a seagate momentus 5400.6 with 160gb. i already ran ubuntu with the cd rom and starts the instalation, but when it arrives to the partitioning part of the instalation, it doesn't detect my hdd. but the bios in the pc detects it.
I've just did a fresh install of Xubuntu 9.10 x86 in a 4 gig pendrive.Just one ext4 partition for / and /home and a swap partition. Only one user created during installation.Everything's fine so far except for two things:-If I launch synaptic from the start menu, it asks for my password which I type in or even copy-paste to be sure.Strangely it always comes back saying incorrect password. If I open a terminal and call "sudo synaptic" and type in my password when prompted, the application shows up fine. Again if I do the same via the Run dialog (alt+F2), that is "sudo synaptic", nothing comes up. If I just type "synaptic", a pop up says that as a user I won't be able to install anything and blah-blah, and the application displays properly
i have an Acer Aspire laptop, 4GB of ram, with Vista and Kubuntu installed (dual boot). When checking my computer properties in Windows, it does say that i have 4GB, but Kubuntu's system monitor says that i have only 2.9GB.
I am having a problem trying to get my UPS (APC BACK-UPS ES 750) to be recognized (via USB) on my new CentOS 5.4 system. I had no trouble a while ago getting it to work on an old Fedora Core 3 system, and I don't think the problem is even with the apcupsd package because at the very least, I expect to see the device appear when I plug in the usb cable and use (from the APCUPSD User Manual):
