I am using dell vostro 1510 laptop with dell wireless 1395 wifi card and I am using Backtrack 5 vmware image with vmware player directly on windows 7.
Sir my lan card is woking but my wifi card is not working at all.
I just installed ubuntu (latest version). Everything worked except when i plug the wifi adapter to the computer nothing happens... It wont show up for wireless network... What do i do? This adapter works great on xp, and its a ralink wifi adapter. I dont know which model version i have though because i bought it new on ebay and it never said model info... I also have a netgear wg111t, how would i get this to work as well?
View 3 Replies View RelatedI have just started to work on Ubuntu (Ubuntu 10.4 LTS) and I am having some problems to get a WUSB600N vers. 2 802.11n adapter working. I have followed the procedure described at [URL] . The compilation has been successful and I can see the kernel loaded an the module detected:
Code:
adrien@ubuntu:/$ lsmod | grep rt3572
rt3572sta 612272 1
adrien@ubuntu:/$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
The wireless adapter is detected by the system and it can scan the neighboring APs (cf. below with MAC address made unreadable):
Code:
adrien@ubuntu:/$ sudo iwlist ra0 scan
[sudo] password for adrien:
ra0 Scan completed :
Cell 01 - Address: --:--:--:--:--:--:--
Protocol:802.11g
[code]....
I am a newbie in linux and I curious to learning all about linux, but I have a little trouble. I've just installed my first linux, its Backtrack 4 and my wirelesss network adapter was not detected..please help what I'm soppost to do..i'm using HP CQ40-416AMD Turion X2Broadcom 802.11 b/g WLAN Adapternote :
View 1 Replies View RelatedI am trying to install wireless WiFi USB adapter LM-001 on to my machine. I downloaded the driver ZD1211LnxDrv_2_16_0_0 and followed the instruction rigorously. However, upon issuing the 'make' command, it stalled saying that that it cannot detect the /lib/modules/2.6.9-89.0.19.ELsmp/build directory. Here is the output:
[root@localhost ZD1211LnxDrv_2_16_0_0]# make
make both
make[1]: Entering directory `/root/LM001/LM001-2007/Linux/ZD1211LnxDrv_2_16_0_0'
make clean
make[2]: Entering directory `/root/LM001/LM001-2007/Linux/ZD1211LnxDrv_2_16_0_0'
rm -rf .tmp_versions .*.cmd *.ko *.mod.c *.mod.o *.o src/*.o src/.*.o.cmd menudbg apdbg winevl_iface
make[2]: Leaving directory `/root/LM001/LM001-2007/Linux/ZD1211LnxDrv_2_16_0_0'
make ZD1211REV_B=0
[Code].....
I have backtrack 4 on vmware player.i have intel (R) wifi 5100 agn wireless card and when i type airmon-ng there is nothing shown on interface..and i have been told i need kernel rebuild..i have kernel 2.6.30.9 so how can rebuild it?
View 10 Replies View RelatedI just installed Ubuntu 10.10 on my Dad's desktop. Everything was fine, but the usb wireless adapter is not being detected correctly. It's Zyxel G-220 (Verizon put it in instead of running a cable from the Vios box next room). I checked the website and it says it's supposed to "work out of the box".
View 1 Replies View Relatedi tried following the readme file included in the driver of the usb network adapter but seems its not exact.
any ideas on how i can configure it manually? KDE does not detect any wifi device. .(of course since no driver is installed yet).
i used my desktop (win***)with DSL connection and installed the driver of the usb net adapter.. made it as the access point. . so my laptop detects the desktop as wifi spot.
I want to change to Debian from Ubuntu. But, unfortrantly, I have problem in installation.I want to install Debian 5 on my Dell optiplex 380 desktop. In the process of installation, the networking adapter can no be detected. My networking adapter is Broadcom Corporation netlink BCM57780 Gigabit Ethernet PCIe. It seems like that Debian 5 does not have the driver for this kind of adapter.What can I do now
View 2 Replies View RelatedNo wireless after upgrading to linux kernel 3.0 in opensuse 11.4. I'm using Kde and gnome 3, everything was working fine under the 2.6.39 kernel, but now both only detects my wired connection. Any help resolving this would be greatly appreciated. I have a Netgear WNDA3100 adapter that uses the Atheros drivers. It also is no longer detected in my Fedora 15 after upgrading the kernel, but it still works in Mint 11 with the 2.6.38.8 kernel.
View 9 Replies View RelatedI have another thread started [URL] asking for support on configuring a Netopia TER/GUSB-N USB Wireless Adapter. But, I figured it would be interesting to get some opinions about other wireless adapters. I don't mind shopping on eBay for a new adapter or purchasing one at Walmart or BestBuy. So basically, I wanted to find out which wireless adapters are guaranteed to work out of the box after installing Debian. I am setting up webcam servers throughout my house and want to use the same hardware as much as possible. So if anyone has any recommendations on a wireless adapter that is proven to work and work well, please let me know.
Here are three that I can get pretty cheap at Walmart: Belkin N150 Enhanced Wireless USB Network AdapterNetgear WG111 Wireless-G 54Mbps USB 2.0 AdapterCisco - Valet Connector (Wireless N USB Adapter) AM10-4A
today my windows crashed and i decided to move into Linux.But here comes my biggest problem now, i cannot connect to wireless network but i am able to connect through wired connectionmine is a 10 year old computer so i think the card used is Intel PRO/Wireless 3945ABGi am using Fedora 14. please note that i know only very little in Linux so please respond accordingly
View 14 Replies View RelatedBeen using Ubuntu for 1 yr now on my Dell Dimension 8250 but a newbie with my Averatec AV3270-EH1 laptop circa 2005. Ubuntu 10.04 does not detect the Integrated WLAN card/adapter. I've looked at all the forums/posts but none had the issue I have. When I type lspci into the terminal i get this back:
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
[code]....
And when I type in iwconfig:
lo no wireless extensions.
eth0 no wireless extensions.
Having moved my computers into a "new" office in my house, I have no network cables. Had fun times trying to run a network cable, ultimately stopped due to unknown block in the vertical wall and fear of drilling through something important. I have strong WIFI signal to this room.
I tried plugging in my Netgear WPN111, didn't work. Works on my Win7 box, and I need one on that anyway, so I'd prefer to get another wifi card, be it a PCI, PCIE, or USB dongle. I would prefer the USB dongle since I could then use it elsewhere if need be. I've installed Ubuntu 10.10 64-bit. The cpu is an Intel quad-core 920, with 8GB ram.
I need to use a USB Wifi adapter to get online and was wondering if anyone had personel experience of one that works out of the box (Perferably on Arch Linux) or with litle configuration. Ive been to [URL] but want morer personal experience because ive gotten devices in the past that 'support linux' and dont work. Please include model numbers and links to documentation on configuration if posssible.
View 13 Replies View RelatedThe usb wifi adapter (airdata 150 s2 usb) which I have don't work well. The first time I put it on my computer does not work, so I installed this package [URL] but still not working. Then I search on intenet and found how to make it to work here [URL] that I do is add "blacklist rt2800usb" at the end of the file /etc/modprobe.d/blacklist.conf . After that usb wifi worked, but I have others problems. Some times it disconnect from the Internet and web pages are loading slow and some times do not load at all. Does any one know how I can make it work well? I am using Debian Squeeze.
[Code]....
I've installed Debian 8.1 on Lenovo G50-80 Touch. Ethernet is OK but the WiFi adapter is disabled. How can I enable it?
Code: Select alluname -a
Linux debianserv 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) x86_64 GNU/Linux[code][/code]
[code]lspci -nnk | grep -i net -A2
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
Subsystem: Lenovo Device [17aa:3821]
Kernel driver in use: r8169
03:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:0041] (rev 20)
Subsystem: Lenovo Device [17aa:3545]
I bought this wifi adapter to use with my home server running debian Wheezy [URL] ....
I installed realtek-firmware and wireless-tools(including NetworkManager and wpasupplicant). I rebooting and plugged in the wireless adapter and it didn't load the driver. After further research, I found that this adapter required the RTL8188EU driver, which I had to install manually. After manually installing that driver using the source from the iwfinger github [URL] .... and rebooting, I plugged in the wireless adapter and it worked. The wireless adapter seemed to work but after testing it under load(downloading a several GB file from the server and uploading a several GB file to the server) I ran into issues during the tests. I'm not sure what is going on but it seems the driver is failing or it is disconnecting from the network. I checked dmesg and this is what I found,
Code: Select all[ 5478.544704] RTL871X: reg 0x80, usb read 4 fail, status:-71 value=0x0, vendorreq_times:1
[ 5478.544707] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:2
[ 5478.544710] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:3
[ 5478.544712] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:4
[ 5478.544714] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:5
[Code] ....
I'm somewhat new to Debian and I'm not sure what else to do here.
Out of all the Linux I have tried, this is the only one which will hibernate and startup again properly. But it has no drivers for the rtl2860 wifi adapter. I am thinking of using NDIS wrapper, but it may stop hibernation working. I see a guide which I am going to try to follow, but has anyone out there got this adapter working and hibernation still works?
View 2 Replies View RelatedI Have an HP Pavilion G6. I recently installed openSUSE after having no luck with another linux distribution. I was told openSUSE is more compatible with laptops, so I figured I'd give it a try. I am now facing the same problem I had been facing w/ the other distribution (Ubuntu). My Network Adapter doesn't seem to be recognized by any linux operating systems. It is a Ralink 802.11b/g/n WiFi adapter. When I open the "network" tab, my home wifi is not listed, nor are any around me. In fact, I can't even open the "wireless" tab.
I've installed any recent drivers for my adapter, and I went to extensive lengths to try to solve the issue on my previous linux distribution. I don't know what output to give you from the terminal, nor do I really know any commands to look for anything. On a side note, I had been messing with my touchpad application, trying to set my preferences. I check the boxes for horiz. and vertic. scrolling with two fingers, and apply. They don't work. I check the boxes for using two finger tap to do something, and three finger tap to do something else.
I started yesterday off wanting to install this USB wifi adapter on my PC (which is mini-itx so has additional pci slots) [URL] it has the Ralink 3070 chipset. I tried everything I found when googling, nothing came close to working, this was in Fedora12. So I gave up and installed Ununtu 10.04, hoping for better luck there. Ubuntu will recognise the presence of a wifi adapter, here's the output from iwconfig
[Code]....
But it sees no wifi networks and generally won't do anything; I don't think it has the right driver. Rosewill does list a (linux) driver and so does Ralink, but again, neither of these come close to working. has anyone gotten this adapter or chipset to work in ubuntu?
Is this possible? and if so how? Basically the PC in my sig connects to the Internet through a Wireless Adapter..etc. I have another tower PC, running Ubuntu that sits next to it - doing nothing and has no internet connection. (My son uses it to play tux paint etc). I would love to be able to connect the Tower PC to My PC via an ethernet cable? and share the Wireless Connection on my PC?
View 4 Replies View RelatedMy laptop has an internal wireless g "adapter" (for lack of a better word) and I plugged in a very cheap and very small ASUS wireless N adapter later on. The ASUS adapter has better bandwidth (again for lack of a better word) but isn't as high quality of a link as the internal adapter is.The laptop appears to be using the internal adapter, but i want it to use the ASUS adapter.
View 5 Replies View RelatedStrange, just fired up my laptop and Wicd is telling me that I am on a Wired Network. Somehow, I have no clue as to how but my wireless connection is now being interpreted as a wired one.
View 7 Replies View Relatedjust installed ubuntu 10.04 and the wifi networks are not detected as in 9.10.In 9.10 installing bcm-wl helped me.. but here the pacakage does not even install succesfully....i have installed b43..
View 4 Replies View RelatedUsing a USB ISO, I recently installed Debian 8.0 Jessie (64-bit, Xfce DE) to a new computer. I usually lose my Wifi connection after 1-3 minutes when donwloading/uploading at around max. speed 4 Mbps/512 kbps. Sometimes it will last 15+ minutes.
When lightly browsing it can usually stay connected for 15-30 minutes. I have to disable and enable Wifi using NetworkManager to connect again. If I remember correctly, there were problems with the Wifi connection even during the installation of Debian.
This Wifi USB adapter works fine on my old computer with Debian 7.7 (32-bit). No problems with the Wifi connection yesterday on my old computer during 10+ hours of activity.
This Wifi adapter also works fine on this new computer when I boot from a live USB (Rescatux 0.30.2) downloading and uploading at max. speed for 1+ hour.
I already tried some suggestions I found online, but they didn't work:
* changing Wifi channels between 1, 6, 11 in my router settings
* changing WPA-WPA2 to WPA2 in my router settings
* ignore IPv6 in NetworkManager
* change probe_wait_ms from 500 ms to higher value by adding Code: Select alloptions mac80211 probe_wait_ms=1000 or Code: Select alloptions mac80211 probe_wait_ms=3000 to /etc/modprobe.d/mac80211.conf and rebooting
* disable Power Management for Wifi adapter (not supported)
* ...
I can also post the output of commands from Rescatux or my old computer if needed.
Output of commands on Debian 8.0 64-bit (I edited out some info, MAC, ...; not sure if that is important):
Code: Select alluname -a
Linux d8lnx 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) x86_64 GNU/Linux
Code: Select alldmesg
...
[ 291.292408] ieee80211 phy0: wlan0: No probe response from AP XX:XX:XX:XX:XX:XX after 3000ms, disconnecting.
[ 291.459825] cfg80211: Calling CRDA to update world regulatory domain
[ 291.462030] cfg80211: World regulatory domain updated:
[ 291.462033] cfg80211: DFS Master region: unset
[CODE]....
I dual-boot Jessie with Windows 10, and I recently guessed that the 'fast boot' (hibernate on shutdown) feature of Windows doesn't properly shut down the RTL8188EU NIC plugged into my PC. So when I boot into Debian, it isn't properly recognised by the driver and I have to completely shut down the PC to make it work.
Is there a way to automatically cut the power to the wireless NIC on startup and then reenable it so I don't have to do this?
My laptop has an internal wifi adapter, but I recently purchased another one because of its extended range.susb, shows that the new adapter is:
Code:
Bus 002 Device 027: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
After disconnecting my internal adapter from the wireless network, I can scan for networks
[code]...
After a new fresh-from-DVD install of Fedora 14 64-bit (over top of Fedora 12 64-bit which went over top of Fedora 10 64-bit before that) my Linksys WUSB600N adapter connects at login to my WiFi N router with WPA2 Personal.
That is great, as previously (fc10/12) I had to use the Ralink drivers per ogetbilo's thread on this forum (that thread kept me on the net for many years now). And at some point this even became a pain because sometimes the system would boot and refuse to connect to the wireless (which would hang trying to connect) and then crash to a dump screen on shutdown (bug reported). The fix was hoped to be found in upgrading to F14 and the newer kernels with working native Ralink chip support.
But I still have an issue... the connection stays up for a few minutes then drops. If I disable/re-enable wireless it (at least sometimes) re-connects. But obviously that is not workable. This is a USB adapter and I am not entirely sure that there is not some USB powersave issue going on, but I do not see anywhere to disable system USB power saving either.
i'm very new to linux(starting), don't know anything. I tried my level best to configure my wifi adapter but, couldn't do it. so give to step wise instructions to to do so.
View 8 Replies View Related