My laptop has an internal wireless g "adapter" (for lack of a better word) and I plugged in a very cheap and very small ASUS wireless N adapter later on. The ASUS adapter has better bandwidth (again for lack of a better word) but isn't as high quality of a link as the internal adapter is.The laptop appears to be using the internal adapter, but i want it to use the ASUS adapter.
View 5 RepliesI started yesterday off wanting to install this USB wifi adapter on my PC (which is mini-itx so has additional pci slots) [URL] it has the Ralink 3070 chipset. I tried everything I found when googling, nothing came close to working, this was in Fedora12. So I gave up and installed Ununtu 10.04, hoping for better luck there. Ubuntu will recognise the presence of a wifi adapter, here's the output from iwconfig
[Code]....
But it sees no wifi networks and generally won't do anything; I don't think it has the right driver. Rosewill does list a (linux) driver and so does Ralink, but again, neither of these come close to working. has anyone gotten this adapter or chipset to work in ubuntu?
I just installed ubuntu (latest version). Everything worked except when i plug the wifi adapter to the computer nothing happens... It wont show up for wireless network... What do i do? This adapter works great on xp, and its a ralink wifi adapter. I dont know which model version i have though because i bought it new on ebay and it never said model info... I also have a netgear wg111t, how would i get this to work as well?
View 3 Replies View RelatedI've just upgraded my old laptop from xubuntu to ubuntu 10.10 and I have some connectivity problems with my usb adapter Netgear WG111v3. On xubuntu I had no problems with connecting on the network but with ubuntu, it says I have good reception but it doesn't connect on the network (rarely it does, but for a very short time). I have another laptop currently running on ubuntu 10.04 and it has no problems at all (however it has an internal usb card).
View 1 Replies View RelatedHPG62-144DX notebook, Windows 7 and considering Ubuntu. I installed 10.10 and tried to get my wifi running but that wouldn't work. I had a connection only sometimes and it broke up after 5 minutes. Once I got a webpage but annoyingly slooow. Got the advice to update drivers and stuff. But the wifi connection is the only one I have...
Went back to 10.4 32-bit. Booted from CD and will keep it that way until this is sorted out. Now I see my wifi hotspots directly and I have no problem to establish a connection. The icon shows 3 bars quality. Network Tools says: Wlan1 = Realtek, Transmitted bytes xxx Received bytes yyy, no errors, link speed = 1Mbps, State = active. Looks good!
The only minor thing here is that enabling/disabling my internal Atheros antanna also enables/disables my Alfa USB Wifi adapter (based on Realtek 8187) but who cares. A bigger problem is: when I start Firefox it doesn't come up with a webpage. It just keeps on saying: "loading". At the bottom of the screen it keeps saying "Looking up" for ages. Nothing further.
Okay I've got a Netgear N-150 WNA 1100 USB WiFi adapter, it doesn't work in Ubuntu it's not supported. There should be a way to make it work with ndiswrapper. I tried and failed before and due to other non related circumstances I had to reinstall Ubuntu. What are the steps to install ndiswrapper and it's dependency's on a fresh Ubuntu installation that cannot connect to the internet.
View 9 Replies View RelatedWiFi adapter TP LINK WN821N is not working in 10.10, WN821N is notworking.
[Code]....
installing this wifi adapter to my laptop runing lubuntu. i got this adapter to work in ubuntu with a realteck natty driver but when i tried the same here it did not work.
how to make a home network with my 2 ubuntu pcs and my lubuntu laptop.
My laptop has an internal wifi adapter, but I recently purchased another one because of its extended range.susb, shows that the new adapter is:
Code:
Bus 002 Device 027: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
After disconnecting my internal adapter from the wireless network, I can scan for networks
[code]...
After a new fresh-from-DVD install of Fedora 14 64-bit (over top of Fedora 12 64-bit which went over top of Fedora 10 64-bit before that) my Linksys WUSB600N adapter connects at login to my WiFi N router with WPA2 Personal.
That is great, as previously (fc10/12) I had to use the Ralink drivers per ogetbilo's thread on this forum (that thread kept me on the net for many years now). And at some point this even became a pain because sometimes the system would boot and refuse to connect to the wireless (which would hang trying to connect) and then crash to a dump screen on shutdown (bug reported). The fix was hoped to be found in upgrading to F14 and the newer kernels with working native Ralink chip support.
But I still have an issue... the connection stays up for a few minutes then drops. If I disable/re-enable wireless it (at least sometimes) re-connects. But obviously that is not workable. This is a USB adapter and I am not entirely sure that there is not some USB powersave issue going on, but I do not see anywhere to disable system USB power saving either.
i have a broadcom BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) wireless adapter on a dell 1501 run by ubuntu 10.10.this particular model and revision is suppose to be absolutely supported by linux and indeed it did work perfectly before the user ran a upgrade from ubuntu 10.10 to 11.04.subsequently i have reinstalled 10.10. as i recall when i installed ubuntu 10.10 the first time i simply ran the System>Admin>Additional Driver installation tool to make the wireless work. i cannot recall if i ran the b43 or the sta driver but i have tried both this time and had no luck.
i am aware that the broadcom adapters are notoriously troublesome and i have tried the two workarounds here URL... as well as their third alternate workaround with no success.
im using fedora 10 with gnome on a laptop, i want to increase power to my wifi adapter as im only getting 40% connection strength to the nearest wifi AP (about 20 feet) in windows under power management there is a slider with best performance against battery life, is there a similar setup in fedora 10? ps, if explained fairly well, i dont mind shell scripting (bash) and compiling.
View 2 Replies View RelatedI got two issues with my wifi usb adapter:
1) it cannot see any networks around
2) i cannot setup it in master mode to use my PC as a router
As far as i can see, the device is recognized and the correct driver (rt73usb) is loaded. I was able to connect to a laptop somehow (the laptop could see other networks and the adapter's PC-to-PC network). I'd like to make it work as a router, i.e. share my internet connection (eth0) via wlan0. Here is what i have:
Code:
Ubuntu 10.04
Linux 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 x86_64 GNU/Linux
TP-Link TL-WN321G wifi usb adapter as seen as
Bus 001 Device 006: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapter
$ iwconfig wlan0
wlan0 IEEE 802.11bg ESSID:off/any
[Code]....
I have a USB WiFi adapter that my Ubuntu desktop install (10.10) automatically detects, and it works great. I just used the alternate installer to set up an old box as a server, and it doesn't install the driver for the adapter. lsusb finds the adapter, but I don't get a wlan* listed in /dev/. how I can determine what module(s) are used to run this adapter on the desktop so I can load them on the older box? Or is there some package I should install from the CD to help auto-detect the adapter?
View 8 Replies View RelatedI have just started to work on Ubuntu (Ubuntu 10.4 LTS) and I am having some problems to get a WUSB600N vers. 2 802.11n adapter working. I have followed the procedure described at [URL] . The compilation has been successful and I can see the kernel loaded an the module detected:
Code:
adrien@ubuntu:/$ lsmod | grep rt3572
rt3572sta 612272 1
adrien@ubuntu:/$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
The wireless adapter is detected by the system and it can scan the neighboring APs (cf. below with MAC address made unreadable):
Code:
adrien@ubuntu:/$ sudo iwlist ra0 scan
[sudo] password for adrien:
ra0 Scan completed :
Cell 01 - Address: --:--:--:--:--:--:--
Protocol:802.11g
[code]....
my long awaited WUA-1340 D-Link wifi adapter has arrived, and...unfortunately won't work it didn't work "out of the box", so I tried the following (found on the aircrack website)Here's what I did....1. Edit /etc/modprobe.d/blacklist and add blacklist rt73usb as a new line.2. RebootThen,
Code:
wget http://homepages.tu-darmstadt.de/~p_larbig/wlan/rt73-k2wrlz-3.0.3.tar.bz2
tar -xjf rt73-k2wrlz-3.0.3.tar.bz2
[code]....
I was running 9.10 in LiveCD mode and was unable to get online. Went to System>Administration>Hardware Drives and found "Broadcom STA wireless driver". Cool. So I went ahead and installed 9.10 (dual boot with Vista), repeated above steps but found no "Broadcom STA wireless driver" option, in fact no proprietary drivers. So I still cannot connect to the Internet, and I don't know where to go from here. (Note: I installed 9.10 side by side with Vista: good? bad?)
[Code]...
i tried following the readme file included in the driver of the usb network adapter but seems its not exact.
any ideas on how i can configure it manually? KDE does not detect any wifi device. .(of course since no driver is installed yet).
i used my desktop (win***)with DSL connection and installed the driver of the usb net adapter.. made it as the access point. . so my laptop detects the desktop as wifi spot.
Having moved my computers into a "new" office in my house, I have no network cables. Had fun times trying to run a network cable, ultimately stopped due to unknown block in the vertical wall and fear of drilling through something important. I have strong WIFI signal to this room.
I tried plugging in my Netgear WPN111, didn't work. Works on my Win7 box, and I need one on that anyway, so I'd prefer to get another wifi card, be it a PCI, PCIE, or USB dongle. I would prefer the USB dongle since I could then use it elsewhere if need be. I've installed Ubuntu 10.10 64-bit. The cpu is an Intel quad-core 920, with 8GB ram.
Is this possible? and if so how? Basically the PC in my sig connects to the Internet through a Wireless Adapter..etc. I have another tower PC, running Ubuntu that sits next to it - doing nothing and has no internet connection. (My son uses it to play tux paint etc). I would love to be able to connect the Tower PC to My PC via an ethernet cable? and share the Wireless Connection on my PC?
View 4 Replies View RelatedI have another thread started [URL] asking for support on configuring a Netopia TER/GUSB-N USB Wireless Adapter. But, I figured it would be interesting to get some opinions about other wireless adapters. I don't mind shopping on eBay for a new adapter or purchasing one at Walmart or BestBuy. So basically, I wanted to find out which wireless adapters are guaranteed to work out of the box after installing Debian. I am setting up webcam servers throughout my house and want to use the same hardware as much as possible. So if anyone has any recommendations on a wireless adapter that is proven to work and work well, please let me know.
Here are three that I can get pretty cheap at Walmart: Belkin N150 Enhanced Wireless USB Network AdapterNetgear WG111 Wireless-G 54Mbps USB 2.0 AdapterCisco - Valet Connector (Wireless N USB Adapter) AM10-4A
I need to use a USB Wifi adapter to get online and was wondering if anyone had personel experience of one that works out of the box (Perferably on Arch Linux) or with litle configuration. Ive been to [URL] but want morer personal experience because ive gotten devices in the past that 'support linux' and dont work. Please include model numbers and links to documentation on configuration if posssible.
View 13 Replies View RelatedI am using dell vostro 1510 laptop with dell wireless 1395 wifi card and I am using Backtrack 5 vmware image with vmware player directly on windows 7.
Sir my lan card is woking but my wifi card is not working at all.
Works fine in Windows 7 on this PC. It's a 2 week old Dell Studio 1749, with no after market software installed aside from Ubuntu (as a secondary OS). When I plug the USB adapter in, the computer locks up. Only while in Ubuntu though. Not sure what the deal is. Chipset is RealTek RTL8187. The adapter is new, fresh out of the box.
View 1 Replies View RelatedThe usb wifi adapter (airdata 150 s2 usb) which I have don't work well. The first time I put it on my computer does not work, so I installed this package [URL] but still not working. Then I search on intenet and found how to make it to work here [URL] that I do is add "blacklist rt2800usb" at the end of the file /etc/modprobe.d/blacklist.conf . After that usb wifi worked, but I have others problems. Some times it disconnect from the Internet and web pages are loading slow and some times do not load at all. Does any one know how I can make it work well? I am using Debian Squeeze.
[Code]....
I've installed Debian 8.1 on Lenovo G50-80 Touch. Ethernet is OK but the WiFi adapter is disabled. How can I enable it?
Code: Select alluname -a
Linux debianserv 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) x86_64 GNU/Linux[code][/code]
[code]lspci -nnk | grep -i net -A2
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
Subsystem: Lenovo Device [17aa:3821]
Kernel driver in use: r8169
03:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:0041] (rev 20)
Subsystem: Lenovo Device [17aa:3545]
I bought this wifi adapter to use with my home server running debian Wheezy [URL] ....
I installed realtek-firmware and wireless-tools(including NetworkManager and wpasupplicant). I rebooting and plugged in the wireless adapter and it didn't load the driver. After further research, I found that this adapter required the RTL8188EU driver, which I had to install manually. After manually installing that driver using the source from the iwfinger github [URL] .... and rebooting, I plugged in the wireless adapter and it worked. The wireless adapter seemed to work but after testing it under load(downloading a several GB file from the server and uploading a several GB file to the server) I ran into issues during the tests. I'm not sure what is going on but it seems the driver is failing or it is disconnecting from the network. I checked dmesg and this is what I found,
Code: Select all[ 5478.544704] RTL871X: reg 0x80, usb read 4 fail, status:-71 value=0x0, vendorreq_times:1
[ 5478.544707] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:2
[ 5478.544710] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:3
[ 5478.544712] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:4
[ 5478.544714] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:5
[Code] ....
I'm somewhat new to Debian and I'm not sure what else to do here.
Out of all the Linux I have tried, this is the only one which will hibernate and startup again properly. But it has no drivers for the rtl2860 wifi adapter. I am thinking of using NDIS wrapper, but it may stop hibernation working. I see a guide which I am going to try to follow, but has anyone out there got this adapter working and hibernation still works?
View 2 Replies View RelatedI Have an HP Pavilion G6. I recently installed openSUSE after having no luck with another linux distribution. I was told openSUSE is more compatible with laptops, so I figured I'd give it a try. I am now facing the same problem I had been facing w/ the other distribution (Ubuntu). My Network Adapter doesn't seem to be recognized by any linux operating systems. It is a Ralink 802.11b/g/n WiFi adapter. When I open the "network" tab, my home wifi is not listed, nor are any around me. In fact, I can't even open the "wireless" tab.
I've installed any recent drivers for my adapter, and I went to extensive lengths to try to solve the issue on my previous linux distribution. I don't know what output to give you from the terminal, nor do I really know any commands to look for anything. On a side note, I had been messing with my touchpad application, trying to set my preferences. I check the boxes for horiz. and vertic. scrolling with two fingers, and apply. They don't work. I check the boxes for using two finger tap to do something, and three finger tap to do something else.
Strange, just fired up my laptop and Wicd is telling me that I am on a Wired Network. Somehow, I have no clue as to how but my wireless connection is now being interpreted as a wired one.
View 7 Replies View Related