today my windows crashed and i decided to move into Linux.But here comes my biggest problem now, i cannot connect to wireless network but i am able to connect through wired connectionmine is a 10 year old computer so i think the card used is Intel PRO/Wireless 3945ABGi am using Fedora 14. please note that i know only very little in Linux so please respond accordingly
Installed fedora 13 to hard drive on fresh partition,installed ok,ran updater,installed all updates.all working ok but fedora is not able to detect my laptop monitor.i am unable to increase resolution.stuck on 800 * 600. when a window in open and i need to click at the bottom of the window i cant because it is bellow the screen.I went to [URL] to look for drivers.it only shows display drivers for red hat 7.0.i tried them but wont install.is thier drivers i can use for fedora 13,or a way to force resolution into 1024*768.
i have installed red hat 5.1 on my dell inspiron 1525 laptop.It is not detecting any ethernet card.driver is marvel yukon 88E8040So far i found this package to be installed kmod-sk98lin-PAE-10.70.7.3-2.el5.elrepo.i686.rpm but it is showing me the dependencies problems..
i have a dell inspiron 15r that i plan on running fedora on, however, today i booted fedora from a live cd and it was completely oblivious to the fact that i have a wireless card, obviously i need certain drivers for it, problem is i dont know what drivers those would be, or where to get them, http://www.dell.com/us/business/p/inspiron-15r/pd this is my laptop model, and it says i have a "Standard Dell Wireless 1501 802.11 g/n" wireless card, if anyone could tell me how to get this working,
I am a newbie in linux and I curious to learning all about linux, but I have a little trouble. I've just installed my first linux, its Backtrack 4 and my wirelesss network adapter was not detected..please help what I'm soppost to do..i'm using HP CQ40-416AMD Turion X2Broadcom 802.11 b/g WLAN Adapternote :
I have spent many time searching for my prob but couldn't solve it. i installed ubuntu 9.10 recently. the problem is that my integrated webcam and microphone are not being detected. i tried cheese, camorama webcam viewer and skype.. its like that webcam drivers are not installed. and i couldn't find any drivers. camorama gives the error: could not connect to video device(/dev/video0) cheese also says No camera found!
reading other threads i found that lsusb comand output might help so here is its output.. code...
I have loaded the latest version of opensuse and I have everything working but I cannot connect to my wireless WPA2 network. I have downloaded the bcm43xx firmware using the method /usr/sbin/install_bcm43xx_firmware I then restarted the network. The computer will now read the network card and will find networks but I cannot get it to connect at all. At first it would connect using ifup in yast but would disconnect after a few seconds. It would never connect through NM. I have a usb network card that works just fine. I am lost as to how to fix this problem.
i've installed openSUSE 11.2/KDE. Installation process finishes with fun. The first thing that i wanted in my laptop don't work. That's wireless internet. I've google and google. saw many thereds in openSUSE forms and check what i understand after reading thereds. Finally what i understand is i've to install firmware. I've downloaded the b43-fwcutter and broadcom-wl-126.96.36.199.tar. Installed b43-fwcutter. and copy broadcom-wl-188.8.131.52.tar. in to root. by using
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wmaster0 Interface doesn't support scanning. code....
I recently upgraded from Ubuntu 10.4 to 11.4 on my Dell Inspiron laptop, and now my wireless is completely disabled, and I do not have an ethernet cord I can use. (I do not have internet access at home, I rely on public wifi.)
I recently upgraded from 10.4 to 11.4 on my Dell Inspiron laptop, and now my wireless is completely disabled, and I do not have an ethernet cord I can use. (I do not have internet access at home, I rely on public wifi.)
I will like to know how to install ethernet drivers dell inspiron N4010 on opensuse 11.3, when I go to YaST > Network Devices > Network Settings and then I have a Warning message "Network is currently controlled by NetworkManager and its settings cannot be edited by Yast. Then I click on OK, I go to Global Options and i click on Traditional Method with ifup, and then I go to Overview and I have this information:
Name IP Address Attansic Ethernet controller Not configured Broadcom WLAN controller DHCP
This is my first time using openSuse, I previously install Ubuntu and I had some similar problem with the internet I hope fix that problem as soon as possible and keep using openSuse. Other thing is that I don't have any internet connection with this laptop even wire or wireless connection.
i installed Ubuntu on my whole hard drive its the only OS i am running i can not get my internal wireless card to work i have tried to follow the post i have seen on here about the same computer but how to install/program my wireless card so i can get on the internet .
The network icon and sound icon disappeared from the panel all of sudden one day while i was using ubuntu 9.10 and the network got disconnected. It used to work fine before when i was using ubuntu 9.04 and even after i updated to 9.10, but then that happened. I added the notification area back to the panel but now ubuntu cannot even find any wireless networks. When i connect a LAN cable to my laptop the internet works fine, but the wireless networks area in the network icon is grayed out and it doesn't show any wireless networks. I'm using a Dell Inspiron 600m laptop and my network card is Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05).
My wife's laptop is Dell Inspiron 6400 running 11.04. Wireless has recently stopped working. Running rfkill list all shows dell-wifi hard blocked no soft blocked no. The fn plus F2 keys toggle status between blocked no and blocked yes, but network manager still can't see network. I've tried removing the Broadcom STA driver - no joy.
i have to say that i'm not too familiar with Ubuntu... or Linux in general . I've installed it once, just to test it out but I didn't know how to use it so i just reinstalled windows. The other night, i was bored and decided i wanted to re-try Ubuntu and to my suprise, i found Wubi. I love ubuntu now and i made the decision to permanently switch over to ubuntu.
At first, my wireless wasn't working, but there was a quick fix. All i had to do was go to the Synaptic Package Manager, Reload, and search for "Broadcom." I installed the Broadcom STA Wireless driver and i was online within a couple of minutes. I then played around for a couple of hours before turning my laptop off. But, this morning, when i turned it back on...I coudlnt' connect. When i click the little connection icon in the top right, i see the message "Wireless is disabled".
There is a key on my computer that turns the wireless card on or off, and i have tried it. It doesn't work. I have reinstalled the broadcom driver and it doesn't work. I've rebooted...And it doesn't work. I don't know enough about linux to get a solution and every other solution i find on the internet doesn't work.
I have seen in other threads that you guys usually ask for a a couple of things from the user. ifconfig and the sudo lshw -C network so i have included them below. I also looked into the ubuntu help documentation and it told me to do the lspci command.
Code: eth0 Link encap:Ethernet HWaddr a4:ba:db:d1:61:c2 inet addr:192.168.1.68 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a6ba:dbff:fed1:61c2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
i can use internet in my Laptop. My laptop is only connected with wireless. No cable connection avilable here. Wireless is functioning well in windows 7 but in openSuSe 11.2 it is not functioning. I've searched on this issue in net and found that i've to install Packman repository or install driver from broadcom website. Please help me by giving easy way to do so. Following is the detail of my wireless device and some other information.
Code: linux-gkpt:~ # lspci -v 0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) Subsystem: Dell Wireless 1390 WLAN Mini-Card Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at efdfc000 (32-bit, non-prefetchable) [size=16K] Capabilities:  Power Management version 2 Capabilities:  MSI: Enable- Count=1/1 Maskable- 64bit-
I just installed the broadcom-wl and broadcom-wl-kmp-desktop packages from the packman repository. Then there is a new entry in the bootmanager menu. Using that one, WLAN works fine.By the way: Can somebody explain me the difference between the broadcom-wl-kmp-desktop, broadcom-wl-kmp-default, broadcom-wl-kmp-pae, broadcom-wl-kmp-xen packages? I did not find any documentation about that.
I had just installed Ubuntu in my brother's laptop and the drivers for the laptop`s wireless card got deleted, or that's what is leading me to believe. Prior to the installation, the laptop was picking up wireless signals just fine. I tried finding the drivers on the INTERNET but there are too many and I don't want to get the wrong one. Even so, I don't know how to install it through Ubuntu or anything. I tried the "disswrapping" app. but it was looking for some sort of ".if" file type. I also tried using the Terminal, but I'm not an expert on this kind of stuff. I got Ubuntu 2 days ago on my own laptop.
I'm running Ubuntu 9.10, Dell Inspiron 1545. I have the NDISwrapper installed, and the driver shows up in "Hardware Drivers" as activated (Broadcom STA wireless driver) it also shows up in "Windows Wireless Drivers" (bcmwl6) but it still won't allow me to connect wirelessly.
I've got a Dell Inspiron 1545 with wireless card Dell wireless 1397 802.11g. It was working fine with Windows and Ubuntu 9.04 (I've got the two OS installed alongside). But as soon as I upgraded my Ubuntu to version 10.4 I realised it lost its wireless connection! I updated the system, the hardware driver for Broadcom STA wireless driver is activated and in use (according to Ubuntu Hardware drivers checker) but the fact is that I can only connect on the Internet if I hook the net cable on it, when I run the mouse over internet connection icon at the topright side of the monitor I see "no network" message and when I left click on it the option "wireless network" it's disabled and gray. How can I get my wireless card back working?
I am having trouble in getting the wireless up in Ubunto 10.04. Under Wireless Networks it says "wireless disabled". I have a dual boot with Windows 7, installed Ubunto with the help of Wubi installer. My laptop is Dell Inspiron 1545, with a 64 bit architecture.I have already done checking and enabling the wireless driver by going to System- Administration-Hardware Drivers and choosing Broadcom STA driver.
Broadcom BCM4306KFB will not connect to internet.how do I download the firmware? I entered the following on the terminal:sudo/usr/sbin/install_bcm43xx_firmware...File does not exist....any ideas?I am running openSuSe 11.1
I am new to Linux. About 72 hours in, and I must say. I am quite impressed. Except for a small issue. I cannot seem to figure out how to get my wireless card working. I have used the bcm43xx technique with no avail. And am working on ndswrapper. The good news is I think I have the .sys file that works. But I don't have the .inf. However any way I could make this work would be great. Below I have posted my lspci stats.
Lspci: 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) .....
I am still a noob with linux and debian in particular. I do some android development so through that I have learned a little bit about linux but only the basic command prompt commands and the basics of how linux works and such.Anyways, I was looking around on the forum and on other forums and I couldn't find any helpful information about how to set up wireless connections (such as wifi) on debian. When I installed debian on my computer it asked me for the ipw2200 files and I didn't have them at the time but now I have the latest framework files for that, I don't really know how to install them and after I install them I don't know how to turn on my wireless connections from there.
I am really sorry if someone already made a post on this subject and I am just too clutzy to find it, if that's the case please just post the link to that thread for me cause I'm dumb as crap.So basically the main problem I am trying to fix right now is that I cannot get my internet to work on my old dell inspiron 6000 laptop which I am trying to get to run debian.