General :: Weird Thing Happening With Graphics After Update?
Apr 11, 2010
Yesterday I had a huge amount of updates, including things like the Kernel, Mesa, and video driver (xf86-video-ati). Now my monitors are all messed up! When I booted, I found that the characters are much smaller and higher resolution in command line mode.
Then when I started X, my two monitors are swapped! The taskbar is on the right, secondary monitor, and I move the mouse off the right edge of the right monitor into the left edge of the left monitor.
View 2 Replies
ADVERTISEMENT
Apr 3, 2010
i have a Toshiba Satellite A355-S6925 laptop i removed Windows and installed Ubuntu 64bits on it. It works great. the problem is when i try to run some graphical programs it gives me weird graphics.. i looked into it and it seems that my graphic card wasn't installed correctly.. please help. here's my "lspci -v" PS: i'm kinda a newbie in the whole linux drivers thing.. i googled and all i could find was windows drivers...
Code:
linkage@dominate:~$ sudo lspci -v
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Toshiba America Info Systems Device ff00
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
[Code]...
View 3 Replies
View Related
Jun 19, 2010
I have installed steam in wine, and installed some of my favorite games. The problem is, whenever I try to play one, there is no lag, but there is a constant flashing distortion over some part of the screen.
Specs:
Wine 1.1.42
ATI Radeon 3470 w/ ATI proprietary drivers
Ubuntu 10.04 x86
This is exactly what it looks like:[URL]..
View 2 Replies
View Related
Jan 27, 2011
i wonder how i can update one single thing on my debian machine? without apt-get upgrade. lets say i just want to update my awstats install but not my php install, or my kernel version but not someting else, how can i do this ?
View 12 Replies
View Related
Aug 10, 2009
I have 2 pty devices (/dev/ptya0 -master & /dev/ttya0 -slave). i am able to open both devices. Both devices file descriptor is same. i am writing to master pty but while reading from the slave its not reading.
Sample code:
Slave:
View 1 Replies
View Related
May 15, 2011
Here's what I updated yesterday The following NEW packages will be installed:libboost-program-options1.46.1{a} python-chardet{a} python-debian{a}
[Code]...
Whenever I play a flash object that has sound, there is this repetitive beeping noise audible over the audio track. I've tried this on different videos and different sites, always with the same result. Whenever I play a multimedia file in Iceweasel, for example [URL]... plodes.ogv , the sound is normal, as is the sound for any multimedia file that I play in MPlayer. So, I am convinced it is a flash issue. What I don't get is why this just started happening for no apparent reason.
View 14 Replies
View Related
Feb 11, 2011
So I just turned my computer on and it was beeping rapidly, and it would stop if I hit "Enter". Also this came on my screen: Cannot set Fray", something like that. It boots fine..just what is that?
View 1 Replies
View Related
Sep 14, 2010
For our class project we are going to use HyperTerminal to communicate to something we are building that is attached to our laptops using USB. We're supposed to use HyperTerminal.URL...I can't believe that a program that does the same thing doesn't exist in Linux. What programs that can do the same thing are available in Linux and Mac OSX?
View 5 Replies
View Related
May 8, 2010
I know in windows, there are such files that even if you don't have the original, the link is still in place, and you can at least get a thumbnail. My computer crashed with my camera card in it, and...partially restored my camera card? So, the pictures I took last night, have hodgepodged with other files, making them useless. The only possible backup I have for these pictures is any kind of history file ubuntu 10.02 may have made while I viewed them off the card.
View 8 Replies
View Related
Mar 19, 2011
I'm trying to crawl a directory on a website and basically download everything in it. The structure is simple enough(but there are also multiple folders), but there is one thing that makes wget choke up.Both of the links work, but they are both the same thing. So wget will download the same file twice. How can I make wget ignore the first one? but this doesn't seem to actually do anything. It will still download the duplicate URLs
View 1 Replies
View Related
May 2, 2010
I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
Integrated graphics
PCI graphics
PCI-Express graphics (PEG)
I set the BIOS on PEG, but
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
View 1 Replies
View Related
Apr 19, 2011
I want to know how can I use sender an receiver of the email in name of file for storing mail in procmailrc. I made one but it does not work.
Quote:
SUBJECT=`formail -xSubject:` # regular field
FROM=`formail -rt -xTo:` # special case
:0 b
* ^FROM.*
| sed -e '/^To: +?[0-9]*$/,/report/!d' > ${FROM}${SUBJECT}--`mktemp 20`date +%y-%m-%d-%S--`XXXXXX`
it works when I use :
Quote:
| sed -e '/^To: +?[0-9]*$/,/report/!d' > `mktemp 20`date +%y-%m-%d-%S--`XXXXXX`
View 1 Replies
View Related
Jun 7, 2010
I'm not sure why this is so difficult. I decided to upgrade to 10.04 from 9.04 after an update messed up my graphics and I had to get some work done rather then sift threw a mound of sparsely detailed possibilities. Also I'm not an leet coder.
So really I've installed 10.04 on many machine's with many different video card's and many different monitors. But to some magnificently obscure reason I'm unable to set the correct resolution on any single computer. Ati, Nvidia. Not intel on second though.
I've managed to scrounge up some tidbits of info on the new KMS (kernel-mode-setting) technology. I've run threw a few suggestions threw out the forums and across the net. I've tried al sorts of drivers. I've tried removing the xorg.conf but I've seen little info on why that is other then it is not needed. I've added things to /etc/default/grub, I've removed things. I've gone threw synaptic and removed everything Nvidia and reinstalled it. This by the way is always off a fresh install every time.
So here it is. I'm at the end of my rope. I know this must be some new way of doing things but It just seems odd that every computer I've tried has failed me. I need the correct resolution to work. I can't keep burning the eye's out of my head looking for possible solutions on crappy resolutions.
I'm sorry for the rant. I'm frustrated and seriously considering switching to Redhat despite having to pay for there service's. Could anyone shed some light on my gloomy situation. I want to keep promoting Ubuntu with out saying "if you can get such and such working"
View 6 Replies
View Related
Sep 27, 2010
I want to update my graphics card :s How do i do it ?
I run ubuntu 10.04
View 5 Replies
View Related
Sep 27, 2010
So first I noticed that ATI's linux driver had an udpate from what I had, so I went ahead and downloaded it and ran the file
$sh ati-file.run
everything installed great except for an error message that said something about the DKMS failed to install...
So I then tried to go under Administrator menu (I think it was the administrator user) -> hardware and enable the ATI driver that this found. But it gave me some fglrs (something like that) error
So i went into synaptic and reinstalled and and rebooted everything seemed fine (but still nothing updated) until i rebooted again.
No everytime I boot it tells me I am in low graphics mode...
and if I try to install/unistall ANYTHING I get an error that says
E: /var/cache/apt/archives/fglrx_2%3a8.723.1-0ubuntu5_amd64.deb: subprocess new pre-installation script returned error exit status 1
View 5 Replies
View Related
Sep 21, 2009
I have Fedora 11. After my most recent update, I can't log in. Every time I authenticate, the logon window disappears, the screen goes black briefly, and then I am back at the log in window I entirely reinstalled, and then it worked, until I updated to the newest kernel then it didn't work anymore. Update: I now generated a xorg.conf with system-config-display --noui I manually removed and reinstalled xorg-x11-drv-intel with yum. It didn't work. By the way: now the start hangs on "Starting atd: OK" If I specify "vesa" in xorg.conf, then it gets past the point, but display doesn't load properly.
View 14 Replies
View Related
Dec 9, 2009
I've been away from computers/Linux for a while so I'm not up on the unix wrangling anymore. So what happened is I started yum extender and it wanted to update. Fine. I let it. I then notice a new kernel is going in so I decide to reboot. I notice different graphics behavior, then I go into my KDE and the graphics are hosed -- as they were when I tried Kubuntu 9.10, which made me come back to my old favorite Fedora. I freak, calm down, reboot (I don't get the old grub? screen offering me kernel boot choices, it just goes into its "ribbon run" at the bottom of the screen) and go into Gnome. Okay, Gnome works -- but no network, i.e., no eth0, i.e., no Internet to come whining to y'all. I then grab the live install disk, get Internet back -- but I don't know how to access the drive or make any changes!
I cry, dry my eyes, try rebooting and banging like a monkey on the keyboard during startup to see if I can get some sort of rescue mode or grub kernel choice list. Yes! After fifth reboot a random pawing of the F keys produces a grub list, I choose 2.6.31.6-145.fc12.i686 and get back to my previous functionality: KDE and Internet work. Culprit is no doubt 2.6.31.6-162.fc12.i686. I would therefore like to know how to boot to the grub manager and get a choice list of kernels to boot
View 11 Replies
View Related
Apr 5, 2010
I updated my fedora 12 installation the other day, and have been working since then to try to get my computer back to working order. Here's what's up:
I ran a yum update and restarted the computer. When it booted back up I couldn't see anything but a black screen where there should've been a login screen. I can do terminal stuff if I hit ctrl+F2, so keep that in mind. I've determined that the problem is that kmod-nvidia-2.6.32.10-90.fc12.x86_64-195.36.15-1.fc12.1.x86_64 didn't get installed during the update process for some reason. I tried to yum install this file through my terminal access, but it didn't recognize any internet connection (neither wired nor wireless). I've downloaded the kmod-nvidia file to my Windows XP partition, and have also put it on my flash drive. So I need to know one of three things: How to access a Windows partition from terminal, how to access a flash drive from terminal, or how to connect to the internet from terminal so I can get the kmod file.
View 3 Replies
View Related
Jun 23, 2010
I just manually updated my opensuse 11.2 installation. This update included the xorg-x11-driver-video-radeonhd driver from version 1.3.0_20091026 to 1.3.0_20100216. As a result now all graphics operations are very slow, eg. redrawing a large window takes around 1sec when moving it to another position. With the old driver is was very smooth. Vlc previously worked very well, now it is not possible to watch a video even with a low resolution. I use a Radeon HD 3200 GFX chip which is on the motherboard (Asus) and additionally I have a separate GFX card (Radeon 3870) in the PCI-E slot which I don't use on Linux - just for gaming on Windows.
View 3 Replies
View Related
Jul 18, 2011
how I update my graphics card drivers. I've been googling all day long, and everything I find is just confusing.
View 9 Replies
View Related
Mar 17, 2011
I installed a routine update through the update manager this morning and when the next time I turned my laptop on neither my graphics driver or my wirless driver were working. When I turned my laptop on I got an error saying:
Ubuntu is running in low graphics mode. The following error was encountered. You may need to update your configuration to solve this.
(EE) NVIDIA: Failed to load the NVIDIA Kernel module. Please check your systems Kernel log for additional error messages.
(EE) Failed to load module "nvidia" (module-specific error, 0)
(EE) No drivers available
After clicking ok to this message I get another with a series of options about how to resolve this ranging from troubleshoot to restart to run in low graphics just once. Once I open the session my wireless won't load up, but I can still connect to ethernet. I'm using a 3 year old HP pavilion laptop running Lucid Lynx. I'm not sure if this problem is related to the update, but it's the only thing that happened out of the ordinary before I ran into this problem. Unfortunately I cannot remember what was included in the update.
View 4 Replies
View Related
Jan 7, 2010
Recently I had (and am still having) a lot of trouble with my Fedora 12 installation.First, 3D acceleration and sound stopped working. This was solver by adding my account to the "video" and "audio" groups (I wonder howcome it worked before?).Then, my keyboard stopped working in X. It would work fine in CLI mode, but as soon as I start X not even the Num Lock LED worked! I think I glimpsed that it might be due to a missing keymap or something, but I don't know. I got my computer back by making Xfce's keyboard settings override X, but it still isn't right, and I can't use anything other than Xfce.Recently I tried to burn a CD/DVD but neither Brasero, K3B, nor cdrecord could detect the DVD burner.
View 5 Replies
View Related
Mar 20, 2011
What's the deal with this bloody commandI trying to do an update of a product.The -f is suppose to "force" the overwrite of existing files isn't it?Well every time I run the command it keeps asking me to allow it to overwrite the files.. the programs is too long for me to sit here hitting the "y" and "enter key"
View 2 Replies
View Related
Aug 12, 2010
I was trying to get the package ready to install my Graphics card to the new update. This is the problem that I am having.
Code:
Problem: nothing provides kernel-devel = 2.6.35-21 needed by kernel-syms-2.6.35-21.1.x86_64 Solution 1: do not install kernel-syms-2.6.35-21.1.x86_64 Solution 2: break kernel-syms by ignoring some of its dependencies Choose from above solutions by number or cancel [1/2/c] (c): c Now the vanilla kernel is 2.6.35-21 were as the "default" opensuse one is 2.6.35-20. I have googled and told opensuse download search engine to look for the 2.6.35-20. I cannot find it at all.
If I upgraded to the vanilla kernel without the opensuse patches would it make my machine unstable? Or can I tell it to break some of the dependencies?
View 2 Replies
View Related
Jul 5, 2010
I just updated my xubuntu 10.4 to the latest firmware and xorg server. Now my computer will only boot in low graphics mode and I can't log in, when I try it logs back out again. I have an nvidia graphics card. My computer was working perfectly until the update.
View 5 Replies
View Related
Oct 5, 2010
I'm running Ubuntu 10.04 on an Apple iMac 27". After updating yesterday, I no longer have working graphics drivers or a working mouse. The graphics card in question is an ATI HD 5750, and mouse is an Apple bluetooth 'magic' mouse.So far I've managed to fix the mouse, but not the graphics.
At first I didn't have any display at all, but I was able to ssh into the machine and get part way through the proprietry graphics driver installation. The installation failed, but at least I have something displaying on the screen now.I have tried the fix in this thread:[URL]The installation of this completes, however the graphics driver is not working. If I go to Administration > Hardware Drivers, then Ubuntu tells me the ATI driver is in use, but it's clearly not (takes 3 seconds to move a window).I've tried booting into the .24 kernel instead of the .25, but that's even worse since not the mouse doesn't work in .24 (it used to work fine)
View 2 Replies
View Related
Dec 1, 2010
I installed a whole mess of updates yesterday, and when I booted into Ubuntu today, my desktop looked off. I could only use the upper 80% of my display, while Docky had decided to completely take over the bottom portion. Killing Docky brought my display back to full size. However, any scrolling or window movement was very jerky. I double checked my appearance preferences, only to find out that I had been 'downgraded' from 'normal' to 'none'. I attempted to go back to my original settings. First, I was told that the Appearance Manager was searching for available drivers. After flashing through all of my open windows, I was told 'Desktop effects could not be enabled'. A bit of searching discovered that people have had problems with compiz in the past. I downloaded compiz-check, and ran it, only to be shown the following:
Quote:
Gathering information about your system...
Distribution: Ubuntu 10.04
Desktop environment: GNOME
Graphics chip: ATI Technologies Inc Radeon HD 2400 XT
Driver in use: fglrx
Rendering method: None
Checking if it's possible to run Compiz on your system... [SKIP]
Checking for hardware/setup problems... [SKIP]
At least one check had to be skipped: Error: No rendering method in use (AIGLX, Xgl or Nvidia)
So, something in my updates broke my graphics rendering. Unfortunately, I don't know how to force Ubuntu to tell me what was updated yesterday. If I could do so, is there a way to revert to the previous version, so I could run the updates one at a time until I figured out what went wrong?
View 1 Replies
View Related
Jun 19, 2011
I have a problem with starting ubuntu 10.10, I changed my graphics card from an ATI card to a Nivida card a week or so ago (Machine has dual boot). I've sort out the windows install, but cant get into ubuntu to update the drivers. It boots as far as console but just leaves me with the text screen. How do I update the drivers from there or get a basic console screen to come up so I can update?
View 1 Replies
View Related
Aug 21, 2010
've googled first - but why is this in front of my username? (and dir) I have never seen it before but am new to terminal and want to learn.I am trying to rm the .Trash (some locked crap) sudo rm -rf /* isn't working and this weird 'prefix' is in front of every directory. Have I hosed it
View 7 Replies
View Related
Sep 6, 2010
I have a folder with the following permissions: drwx--S--- 10 user group 4096 2010-08-30 17:27 FolderName....Could someone kindly explain to me what the --S is? I would like to change the permissions of FolderName to either chmod 770 or 750.I was just wondering if changing the permissions will affect the --S?
View 1 Replies
View Related
