I have installed steam in wine, and installed some of my favorite games. The problem is, whenever I try to play one, there is no lag, but there is a constant flashing distortion over some part of the screen.
Specs:
Wine 1.1.42
ATI Radeon 3470 w/ ATI proprietary drivers
Ubuntu 10.04 x86
This is exactly what it looks like:[URL]..
Is there a startup option I can put in the /etc/init.d/mysqld script or an option in the /etc/my.cnf file to enable the Archive engine for MySQL or do I have to compile it from the source?
[Code]....
i have a Toshiba Satellite A355-S6925 laptop i removed Windows and installed Ubuntu 64bits on it. It works great. the problem is when i try to run some graphical programs it gives me weird graphics.. i looked into it and it seems that my graphic card wasn't installed correctly.. please help. here's my "lspci -v" PS: i'm kinda a newbie in the whole linux drivers thing.. i googled and all i could find was windows drivers...
Code:
linkage@dominate:~$ sudo lspci -v
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Toshiba America Info Systems Device ff00
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
[Code]...
What is causing this graphic distortion?I dropped Vista because this problem would crash the video driver and pop a black screen for a few seconds over and over and over and over.Now that I installed ****ING Ubuntu it's doing this problem, but without the black screens and only messed up graphics show.So what the heck guys, is this a hardware or software problem? And this same type of graphic distortion appears in games like Combat Arms and Halo.I am so SICK of NVIDIA never ever in my whole entire life will I ever buy NVIDIA again! Luckily for nvidia I'm only 17 years old and have 40 years of life left to buy computers without nvidia in them. Until I save up dough for a new computer "without nvidia" I'll keep trying to fix this. P.S this nvidia chip is tied down to my motherboard.
View 7 Replies View RelatedYesterday I had a huge amount of updates, including things like the Kernel, Mesa, and video driver (xf86-video-ati). Now my monitors are all messed up! When I booted, I found that the characters are much smaller and higher resolution in command line mode.
Then when I started X, my two monitors are swapped! The taskbar is on the right, secondary monitor, and I move the mouse off the right edge of the right monitor into the left edge of the left monitor.
I've been having this problem for a long time now. It started suddenly and without apparent cause. 3D games won't work. At first I tried to play OpenArena, and it didn't work, the graphics went terribly slow and choppy, videos were not continious, but rather a succession of pictures of movement. I tried installing and re installing the game several times, but nothing... Now, I'm trying to run hedgewars (the re-make of worms) and it doesn't crash or anything, but the graphics are too slow and choppy again. This is the output from the terminal:
[Code]...
The 'there is no soundcard' message is scary... I have been having sound problems lately, where sounds just stops working in all applications, and only restarting the system will bring sound back. So as you can see my audio and video seem to be on the wrong track. But I don't know how to diagnose the disease... by the way. I installed hedgewars from squeeze though I have lenny. I added the squeeze line to sources.list.and then apt-get-ed it. Is that OK?
I use Intel HD Graphics and every time I run a game, it black-screens and I have to restart a thousand times before the game works and I can switch to windowed mode (restart once to do this).
lspci:
[alex@alex01 ~]$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) .....
I also use an HDMI cord (since computer has HDMI support) so this may be contributing to the problem. The same does not occur with my laptop, which runs Nvidia graphics and Ubuntu. I really want this to not happen so I can play my games instantly without restarting a million times. Some games have yet to work (AssaultCube mostly).
I am currently having an issue attempting to set up a dedicated server for source games (TF2, CS:S, L4D2). The required port (27015), along with most others, appears closed to the rest of the world and upon a port scan with DMZ hosting on (therefore no router interference between the internet and my computer) only a few ports are open (80, 139, 443, 445). My ISP does not block ports so therefore the only issue I can find is with my computer running Ubuntu 11.04. I have ensured that all traffic is allowed via iptables and I can't think of anything else that would have ports closed.
View 9 Replies View RelatedI'm new to, not just SUSE, but Linux(.) I saw the link to the newbie guide However it's asking for information, I choose not to make public, or or known.Also, Any info on running a game server for Source SDK games.
View 3 Replies View RelatedSo I just turned my computer on and it was beeping rapidly, and it would stop if I hit "Enter". Also this came on my screen: Cannot set Fray", something like that. It boots fine..just what is that?
View 1 Replies View RelatedMy questions is about switching graphics card on a Intel/AMD hybrid system using open source drivers (Envy 15 with HD4000 and AMD 7690M). I was waiting for an proprietary driver from AMD but apparently it will not be released in the near future and I need to use AMD chip for my 3D intense applications.
View 0 Replies View RelatedI've set up this new PC, the graphic card I picked is the ATI R7 260X, pretty good card with lots of core processors, high clock and 2GB memory. I'm now currently using the 14.4 catalyst drive, it works actually alright, though, there are some mishaps with this driver:
First my hdmi screen had scale down, leaving black borders around, even though the catalyst control said the correct native resolution, this turned out to be a underscan that fglrx does and I've finally managed to fix it. Other caveat is that the screen simply won't suspend or turn off( via software), DPMS actually works, forcing it turns the screen blank for some seconds but something does not allow the screen to sleep.
Performance wise it seems pretty good though, everything is pretty smooth, being able to play games maxed out on resolution and ultra settings, though, I still haven't tested out that many games.
The open-source radeon on the other hand, well its open-source, fully xorg and linux compatible, which is a major plus point. It seem it has come a long way, supporting lot of features and providing better performance in some cases.
Before installing Catalyst I had issues with mesa and steam, steam would complain about not finding the 32bit libraries, this is however a steam runtime issue, maybe it could already be fixed.
I've just been looking at a simple but well done flash based graphic on the bbc. [URL]..it is about supercomputing (btw, isn't it great to see that linux is uber alles in that area of computing). My question is simple: How would one make some interactive online graphic like this on linux using open-source tools? ideally, I would also like it to work on the client side using only open-source tools. I've heard a little about openlazlo, but I don't really know what it does.
View 2 Replies View RelatedI have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
Integrated graphics
PCI graphics
PCI-Express graphics (PEG)
I set the BIOS on PEG, but
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies View Relatedhow to install Tesserect engine on Ubantu?
View 1 Replies View RelatedIs there any way to get a text to speech engine on ubuntu like microsoft mike and mary? I tried espeak and gespeaker, but their selection of voices weren't too good.
View 2 Replies View RelatedThe ClamTK menu says all is fine except the Antivirus engine is not up to date. I am unable to find an update for it.
View 1 Replies View RelatedI've seen a number of instructions online that say to add either the elementary art ppa or the murrine daily ppa to get the 0.98 murrine engine installed. I did that but it only installs 0.91. I checked synaptic to see if I can force the version to install, but still, no dice. 0.91 is the highest version I can seem to install.
I also tried compiling from source, which appeared to run w/o any issues, but I must be missing something because it appears to not have any affect.
I had an interest in installing this theme [URL]but it requres gtk-xfc-engine. I found the compressed package but I'm not sure how to install it?
View 9 Replies View RelatedI have installed both eboard and stockfish, but how do I add the stockfish engine to the eboard? The only engines I can find in eboard are: Gnu chess, sjeng and crafty.
View 1 Replies View RelatedUbuntu 10.10 My wife wanted to use a new gtk-theme so she used the option "download more themes" and installed a new gtk-theme. The theme was not vissible for her so she just chose another default one. Now when ever either of us login into our accounts the default internal gtk-theme is used (the ugly grey square one). When we start the themes application (don't know the english name for it, it enables you to choose another theme for your desktop). The previously selected theme is then enabled even before the window of the util is shown.
View 8 Replies View RelatedIs there any alternative to the Unity Game engine or can I run it On Linux?
View 3 Replies View RelatedI have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
Does anyone know any software or tricks how slow down cpu. The aplet on top panel whose control cpu freq allow set only 2Ghz. On windows to EPU-Six i can for example set 1,8Ghz and automaticly vcore drop to 0,967V. On ubuntu the lower value is 2Ghz and 1,1V. I have Asus P5Q PRO on P45 chipset and Core 2 Duo E8400 on Ubuntu 9.10
View 7 Replies View RelatedYesterday, after installing suggested updates since I last updated a few weeks ago, themes are broken. I am using 10.04 Lucid, now running 2.6.32-24. (Booting the previous kernel did not help.)
After rebooting, I noticed that the login screen had less attractive widgets, which persisted after I logged in. Opening the Appearance Preferences, there were no themes listed. There are a bunch of them in /usr/share/themes. If I copy the Ambiance folder from there to ~/.themes, it will appear in the dialog; but when selected, the Window Border changes, while the Controls do not.
If I run gedit from the shell, I get these messages:
Code:
There was no GTK_PATH environment variable. (Where does it and GTK_MODULES get set globally?) I tried setting it to /usr/lib, but that had no effect.
It looks like a problem finding and/or loading the required files? Permissions? Dependencies?
I typed this cmd : sudo ln -s /home/user_name/.themes /root trying to link themes to root so that apps run as root would use the theme. However, now i can't run nautilus from a terminal i get this: sudo nautilus (nautilus:3229): Gtk-WARNING **: Unable to locate theme engine in module_path: "ubuntulooks",
(nautilus:3229): Unique-DBus-WARNING **: Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(nautilus:3229): Unique-DBus-WARNING **: Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
I found that "ask search engine" installed as default web search engine instead of google in firefox. Now it's impossible to go back to google search engine as "ask" always remains as default search and no other search engins are shown in the firefox list.Any idea about how to get rid of "ask"? I managed to install another "unofficial google" search plugin but if i click on restore default search engine "ask" will be restored.
View 9 Replies View RelatedIs there any open source virtual machine so i can study the source in order to create my own? i'm gonna write my own, so it doesNT matter if license does not allow further development of the code.
View 1 Replies View Relatedi am already a little bit familiar with linux and now i want to know better the linux OS. i have downloaded the source code of the krnel from the kernel.org and i dont understand the linux source trees organization, so can somebody do me a favor and give me a link to some internet page (or at least a book) that explains that?? i have searched in the internet with the tag:::linux source trees organization and i have not found nothing interesting
View 1 Replies View Related