I'm not sure why this is so difficult. I decided to upgrade to 10.04 from 9.04 after an update messed up my graphics and I had to get some work done rather then sift threw a mound of sparsely detailed possibilities. Also I'm not an leet coder.
So really I've installed 10.04 on many machine's with many different video card's and many different monitors. But to some magnificently obscure reason I'm unable to set the correct resolution on any single computer. Ati, Nvidia. Not intel on second though.
I've managed to scrounge up some tidbits of info on the new KMS (kernel-mode-setting) technology. I've run threw a few suggestions threw out the forums and across the net. I've tried al sorts of drivers. I've tried removing the xorg.conf but I've seen little info on why that is other then it is not needed. I've added things to /etc/default/grub, I've removed things. I've gone threw synaptic and removed everything Nvidia and reinstalled it. This by the way is always off a fresh install every time.
So here it is. I'm at the end of my rope. I know this must be some new way of doing things but It just seems odd that every computer I've tried has failed me. I need the correct resolution to work. I can't keep burning the eye's out of my head looking for possible solutions on crappy resolutions.
I'm sorry for the rant. I'm frustrated and seriously considering switching to Redhat despite having to pay for there service's. Could anyone shed some light on my gloomy situation. I want to keep promoting Ubuntu with out saying "if you can get such and such working"
I am trying to install Xubuntu on a old toshiba satellite A55. I threw in the live CD and did the try without any changes to your computer. The starts to load, when it finishes loading, and I can finally start poking around it freezes right away. When it freezes the graphics get a bit messed up, little ghost images next to their actual image appear (like a second icon of the same thing slightly offset, and blue/white) I had the same problem with Mint. Only thing I have been able to get running is puppy linux.
Laptop info: Celeron M CPU roughly 750mb ram ata-100 western digital drive Toshiba Satellite A55-S3062
I've got an HP ThinClient that my computer dumped in the recycling pile. I swapped out the ATA 1-gig flash drive, and replaced it with a 60 gig ATA hard drive. I installed Ubuntu on it through a flash-drive, and everything comes up just fine. When I boot up the computer, I get the ubuntu screen, it comes to the login, I select my username and enter my password. I hear the little jingle music, and then the computers graphics get messed up. I still see the mouse, and it appears as though I'm opening windows, but they come up really as just screwed up boxes that are black or other colors and the graphics get all distorted.
I just figured out how to get into the GRUB menu, and I was able to boot in reduced graphics mode. verything seems to be in 16 colors, but I can actually log in now and see everything! (really cool). Just to give an update, I can log into the computer using rescue mode, and I can do everything on the computer that I want to in 16-color mode or whatever that mode is. As soon as I reboot in the normal mode, the graphics mess up as SOON as I log in.
I did a system update and it did something to the grub loader and now all I can select is my windows partition. I'm not really sure how to go about restoring my grub loader. I had ubuntu 10.04.
The last update of a few days ago messed up the update manager. here is the error that I get. I do not have the time to hunt for bug reports to report this and don't know how anyway. maybe someone else can do it.
Could not initialize the package information An unresolvable problem occurred while initializing the package information. report this bug against the 'update-manager' package and include the following error message:
'E:Encountered a section with no Package: header, Eroblem with MergeList /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_maverick_main_b inary-i386_Packages, E:The package lists or status file could not be parsed or opened.'
I just started using Ubuntu 10.04 for development reasons and installed Ubuntu on a seperate harddrive with dualboot option with Windows 7.Today Win 7 got an update and I mysteriously got bumped back to the grub screen after selecting Windows boot option, but my Ubuntu was ok. After that I probably did the worst I could, and googled the problem and tried out some years-old advices which messed up my ubuntu boot as well.I am currently using my computer through Ubuntu Live Usb.
I have updated from 9.10 to 10.04 on line via Update Manager. Update Manager messed up my sources. Blocked most of them on update. I unblicked them and changed everything to Lucid from Karmic. No luck. Errors all the time:
Code: W: GPG error: [URL] lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5 W: GPG error: [URL] Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5 W: GPG error: [URL] Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5 I cannot add gpg keys and use for example canonical.
My last update for Ubuntu 9.10 messed up my whole install. My question is how do I reformat my parttion so I can reinstall Ubuntu. I am using dual boot with Windows and Ubuntu!
My computer is a dual boot between windows xp and fedora 12. I am using grub and my first boot selection default was windows. My computer has the following specs: -AMD athlon xp 2400+ at stock speed 2.0Ghz -640mb of ram, 2x256mb, 1x128mb, all 266mhz speed -250gb SATA harddrive, seagate -Nvidia GeForce 4mx AGP video card -ASUS A7V600 rev. 1.00 motherboard
I booted up fedora 12 today(12/17/2009) and did a fedora software update (task bar->system->administration->software update). It said it found 94 new updates release on (12/16/09), so click update, and the computer did its updates and reboot. Now my grub boot loader is messed up (boot default was windows, now its not) and random apps crash, like gedit, so I can't edit my grub settings to boot to windows and linux is now useless because apps keep crashing. As of right now I am using another computer to post this. I know one of the updates was a Fedora 12 kernel update. And the new updated fedora 12 "automatic bug reporting tool" does not work any more, after the update.
Some ideas I have, but I have no idea how to do them: -uninstall last updates -repairand/or restore bad files This is important because I need to use some of the apps/programs for work.
I have just updated current to get the new kernel and things seem to have gone just a little wrong.After upgrading i edited lilo.conf and ran all seemed fine so i rebooted to find my pc wont boot it cannot find modules and there will be trouble ahead it think it says (will check the error and add it).So i thought no problem i can just boot from an old disk i have laying around and fix it from there. I only had the 12.2 install disk or ubuntu 8.10 live cd neither of witch support ext4 which i stupidly decided to format my drives in.
Anyways i now have a ubuntu 9.10 disk and have booted and try to fix things but am miffed at whats going on. If i chroot into my slack root and look in my /boot there is only the old files before the update, but if i mount the drive in ubuntu there are the new files from after the update.What has happened and how can i fix it? It has just occurred to me i could use a tmp dir and copy the correct /boot files there then in the chroot copy them to /boot may work ?
system update today which moved the nvidia drivers from 195 to 260.After performing the update with synaptic and restarting, I noticed that my desktop theme, "Clearlooks," was messed up in that the shiny progress band was now two separate colours (blue and white). Tried other themes (among them "Glossy") and found most of them corrupted with, for example, the progress bar totally white.Similar problem with Iceweasel 4: the tabs have lost their inferior border, and the address/search bars are surrounded by white.I suspect (though I can't be sure) that the above is caused by the nvidia update. I did an "nvidia-xconfig" to try and see if this would change things, but no.
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
So first I noticed that ATI's linux driver had an udpate from what I had, so I went ahead and downloaded it and ran the file
$sh ati-file.run
everything installed great except for an error message that said something about the DKMS failed to install...
So I then tried to go under Administrator menu (I think it was the administrator user) -> hardware and enable the ATI driver that this found. But it gave me some fglrs (something like that) error
So i went into synaptic and reinstalled and and rebooted everything seemed fine (but still nothing updated) until i rebooted again.
No everytime I boot it tells me I am in low graphics mode...
and if I try to install/unistall ANYTHING I get an error that says
E: /var/cache/apt/archives/fglrx_2%3a8.723.1-0ubuntu5_amd64.deb: subprocess new pre-installation script returned error exit status 1
I installed a routine update through the update manager this morning and when the next time I turned my laptop on neither my graphics driver or my wirless driver were working. When I turned my laptop on I got an error saying:
Ubuntu is running in low graphics mode. The following error was encountered. You may need to update your configuration to solve this. (EE) NVIDIA: Failed to load the NVIDIA Kernel module. Please check your systems Kernel log for additional error messages. (EE) Failed to load module "nvidia" (module-specific error, 0) (EE) No drivers available
After clicking ok to this message I get another with a series of options about how to resolve this ranging from troubleshoot to restart to run in low graphics just once. Once I open the session my wireless won't load up, but I can still connect to ethernet. I'm using a 3 year old HP pavilion laptop running Lucid Lynx. I'm not sure if this problem is related to the update, but it's the only thing that happened out of the ordinary before I ran into this problem. Unfortunately I cannot remember what was included in the update.
I just updated my xubuntu 10.4 to the latest firmware and xorg server. Now my computer will only boot in low graphics mode and I can't log in, when I try it logs back out again. I have an nvidia graphics card. My computer was working perfectly until the update.
I'm running Ubuntu 10.04 on an Apple iMac 27". After updating yesterday, I no longer have working graphics drivers or a working mouse. The graphics card in question is an ATI HD 5750, and mouse is an Apple bluetooth 'magic' mouse.So far I've managed to fix the mouse, but not the graphics.
At first I didn't have any display at all, but I was able to ssh into the machine and get part way through the proprietry graphics driver installation. The installation failed, but at least I have something displaying on the screen now.I have tried the fix in this thread:[URL]The installation of this completes, however the graphics driver is not working. If I go to Administration > Hardware Drivers, then Ubuntu tells me the ATI driver is in use, but it's clearly not (takes 3 seconds to move a window).I've tried booting into the .24 kernel instead of the .25, but that's even worse since not the mouse doesn't work in .24 (it used to work fine)
I installed a whole mess of updates yesterday, and when I booted into Ubuntu today, my desktop looked off. I could only use the upper 80% of my display, while Docky had decided to completely take over the bottom portion. Killing Docky brought my display back to full size. However, any scrolling or window movement was very jerky. I double checked my appearance preferences, only to find out that I had been 'downgraded' from 'normal' to 'none'. I attempted to go back to my original settings. First, I was told that the Appearance Manager was searching for available drivers. After flashing through all of my open windows, I was told 'Desktop effects could not be enabled'. A bit of searching discovered that people have had problems with compiz in the past. I downloaded compiz-check, and ran it, only to be shown the following:
Quote:
Gathering information about your system... Distribution: Ubuntu 10.04 Desktop environment: GNOME Graphics chip: ATI Technologies Inc Radeon HD 2400 XT Driver in use: fglrx Rendering method: None Checking if it's possible to run Compiz on your system... [SKIP] Checking for hardware/setup problems... [SKIP]
At least one check had to be skipped: Error: No rendering method in use (AIGLX, Xgl or Nvidia)
So, something in my updates broke my graphics rendering. Unfortunately, I don't know how to force Ubuntu to tell me what was updated yesterday. If I could do so, is there a way to revert to the previous version, so I could run the updates one at a time until I figured out what went wrong?
I have a problem with starting ubuntu 10.10, I changed my graphics card from an ATI card to a Nivida card a week or so ago (Machine has dual boot). I've sort out the windows install, but cant get into ubuntu to update the drivers. It boots as far as console but just leaves me with the text screen. How do I update the drivers from there or get a basic console screen to come up so I can update?
I have Fedora 11. After my most recent update, I can't log in. Every time I authenticate, the logon window disappears, the screen goes black briefly, and then I am back at the log in window I entirely reinstalled, and then it worked, until I updated to the newest kernel then it didn't work anymore. Update: I now generated a xorg.conf with system-config-display --noui I manually removed and reinstalled xorg-x11-drv-intel with yum. It didn't work. By the way: now the start hangs on "Starting atd: OK" If I specify "vesa" in xorg.conf, then it gets past the point, but display doesn't load properly.
I've been away from computers/Linux for a while so I'm not up on the unix wrangling anymore. So what happened is I started yum extender and it wanted to update. Fine. I let it. I then notice a new kernel is going in so I decide to reboot. I notice different graphics behavior, then I go into my KDE and the graphics are hosed -- as they were when I tried Kubuntu 9.10, which made me come back to my old favorite Fedora. I freak, calm down, reboot (I don't get the old grub? screen offering me kernel boot choices, it just goes into its "ribbon run" at the bottom of the screen) and go into Gnome. Okay, Gnome works -- but no network, i.e., no eth0, i.e., no Internet to come whining to y'all. I then grab the live install disk, get Internet back -- but I don't know how to access the drive or make any changes!
I cry, dry my eyes, try rebooting and banging like a monkey on the keyboard during startup to see if I can get some sort of rescue mode or grub kernel choice list. Yes! After fifth reboot a random pawing of the F keys produces a grub list, I choose 2.6.31.6-145.fc12.i686 and get back to my previous functionality: KDE and Internet work. Culprit is no doubt 2.6.31.6-162.fc12.i686. I would therefore like to know how to boot to the grub manager and get a choice list of kernels to boot
I updated my fedora 12 installation the other day, and have been working since then to try to get my computer back to working order. Here's what's up: I ran a yum update and restarted the computer. When it booted back up I couldn't see anything but a black screen where there should've been a login screen. I can do terminal stuff if I hit ctrl+F2, so keep that in mind. I've determined that the problem is that kmod-nvidia-2.6.32.10-90.fc12.x86_64-195.36.15-1.fc12.1.x86_64 didn't get installed during the update process for some reason. I tried to yum install this file through my terminal access, but it didn't recognize any internet connection (neither wired nor wireless). I've downloaded the kmod-nvidia file to my Windows XP partition, and have also put it on my flash drive. So I need to know one of three things: How to access a Windows partition from terminal, how to access a flash drive from terminal, or how to connect to the internet from terminal so I can get the kmod file.
I just manually updated my opensuse 11.2 installation. This update included the xorg-x11-driver-video-radeonhd driver from version 1.3.0_20091026 to 1.3.0_20100216. As a result now all graphics operations are very slow, eg. redrawing a large window takes around 1sec when moving it to another position. With the old driver is was very smooth. Vlc previously worked very well, now it is not possible to watch a video even with a low resolution. I use a Radeon HD 3200 GFX chip which is on the motherboard (Asus) and additionally I have a separate GFX card (Radeon 3870) in the PCI-E slot which I don't use on Linux - just for gaming on Windows.
I installed this graphics card update in kubuntu 11.04 [URL].... And when now kubuntu boots to a command line interface login screen I don't mind reinstalling to fix it, i would just like to install the latest version of the graphics card driver. I've tried twice with the same results, how i can fix it?
Yesterday I had a huge amount of updates, including things like the Kernel, Mesa, and video driver (xf86-video-ati). Now my monitors are all messed up! When I booted, I found that the characters are much smaller and higher resolution in command line mode.
Then when I started X, my two monitors are swapped! The taskbar is on the right, secondary monitor, and I move the mouse off the right edge of the right monitor into the left edge of the left monitor.
i don't know what this os want from me one moment everything is fine the next it's not first of all it started asking me to choose resolution on startup it said undefined b31 and i have to press enter then 366 for 1024x1280 32 bit how can i fix this problem how can i define 366 resoultion as default and how can i update the screen card driver for 10.1 i have ati hd 3650 agp card. and by the way what are the cool things i can do with graphics here except the rottaing windows.
I was trying to get the package ready to install my Graphics card to the new update. This is the problem that I am having.
Code: Problem: nothing provides kernel-devel = 2.6.35-21 needed by kernel-syms-2.6.35-21.1.x86_64 Solution 1: do not install kernel-syms-2.6.35-21.1.x86_64 Solution 2: break kernel-syms by ignoring some of its dependencies Choose from above solutions by number or cancel [1/2/c] (c): c Now the vanilla kernel is 2.6.35-21 were as the "default" opensuse one is 2.6.35-20. I have googled and told opensuse download search engine to look for the 2.6.35-20. I cannot find it at all.
If I upgraded to the vanilla kernel without the opensuse patches would it make my machine unstable? Or can I tell it to break some of the dependencies?
I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
